zemismart-rollershade.yaml

# These substitutions allow the end user to override certain values
substitutions:
  device_description: 'Zemismart WF25S Roller Shade' # https://www.aliexpress.com/item/33012061596.html
  friendly_name: 'Shade'
  device_name: shade
  project_base: 'Zemismart'
  project_name: 'Roller Shade'
  project_version: 'WF25S'

esphome:
  name: $device_name
  friendly_name: $friendly_name
  comment: $device_description
  # This will allow for (future) project identification,
  # configuration and updates.  
  project:
    name: ${project_base}.${project_name}
    version: $project_version
  # Automatically add the mac address to the name
  # so you can use a single firmware for all devices
  name_add_mac_suffix: true

esp8266:
  board: esp01_1m
  restore_from_flash: true

# To be able to get logs from the device via serial and api.
logger:

# API is a requirement of the dashboard import.
api:

# OTA is required for Over-the-Air updating
ota:

# This should point to the public location of this yaml file.
dashboard_import:
  package_import_url: github://velijv/esphome-configs/zemismart-rollershade.yaml@main

wifi:
  # Set up a wifi access point using the device name above
  ap:
    password: "12345678"

# In combination with the `ap` this allows the user
# to provision wifi credentials to the device.
captive_portal:


##########################################################
# Most projects should not remove anything from above here
# and should just modify the name, project name/version 
# and git url for the dashboard_import
##########################################################


# Sets up the improv via serial client for Wi-Fi provisioning.
# Handy if your device has a usb port for the user to add credentials when they first get it.
improv_serial:
  next_url: https://veli.ee/esphome?device_name={{device_name}}&ip_address={{ip_address}}&esphome_version={{esphome_version}}  

##########################################################
# Hardware config starts here
# GPIO12 - button down
# GPIO13 - motor down
# GPIO05 - button up
# GPIO0 (RX) - box status led 
# GPIO2 - ESP_status_led
# GPIO15 - motor up
# GPIO3 - button stop
##########################################################
# implanted esp01_1m leaves free gpios for other stuff
# GPIO01 - TXD
# GPIO04 - SDA
# GPIO14 - SCLK
##########################################################

switch: 
  - platform: gpio
    pin: GPIO13
    id: ${device_name}_switch_down
    name: Mode Down    
    interlock: ${device_name}_switch_up # https://esphome.io/components/switch/gpio.html#switch-gpio-interlocking
    interlock_wait_time: 200ms
    internal: true
    restore_mode: ALWAYS_OFF

  - platform: gpio
    pin: GPIO15
    id: ${device_name}_switch_up
    name: Mode Up
    interlock: ${device_name}_switch_down
    interlock_wait_time: 200ms    
    internal: true    
    restore_mode: ALWAYS_OFF    

button:
  - platform: template
    name: Stop
    id: ${device_name}_stop
    internal: true    
    on_press:
      - switch.turn_off: ${device_name}_switch_down
      - switch.turn_off: ${device_name}_switch_up

cover:
  - platform: time_based
    name: None
    device_class: shade 
    id: shade
    open_action:
      - switch.turn_on: ${device_name}_switch_up
      - light.turn_on: ${device_name}_box_status_led
    open_duration: 26s
    close_action:
      - switch.turn_on: ${device_name}_switch_down
      - light.turn_on: ${device_name}_box_status_led
    close_duration: 24s
    stop_action:
      - button.press: ${device_name}_stop
      - light.turn_off: ${device_name}_box_status_led
#    has_built_in_endstop: true # has no built in endstop afaik
    on_closed:
      - logger.log: "Cover is CLOSED!"
    on_open:
      - logger.log: "Cover is OPEN!"          

output:
  - id: led
    platform: gpio
    pin: 
      number: GPIO0
      inverted: true

light:
  - platform: status_led
    name: LED ESP12-F Status
    id: ${device_name}_esp_status_led    
    icon: mdi:led-on
    entity_category: diagnostic
    disabled_by_default: true    
    restore_mode: ALWAYS_OFF
    pin: 
      number: GPIO02
      inverted: true

  - platform: binary
    name: LED on Box # color is red + (always on blue) = purple
    id: ${device_name}_box_status_led 
    icon: mdi:led-off
    entity_category: diagnostic
    disabled_by_default: true    
    restore_mode: ALWAYS_OFF  
    output: led

binary_sensor:
  - platform: gpio
    pin: 
      number: GPIO12
      inverted: true
    id: ${device_name}_sensor_down
    entity_category: diagnostic
    icon: mdi:blinds
    name: Down
    on_press:
      then:
        - cover.close: shade
    on_multi_click:
      - timing:
          - ON for at most 1s
          - OFF for at most 0.3s
          - ON for at most 1s
          - OFF for at least 0.2s
        then: 
          - cover.control:
              id: shade
              position: 25%
      - timing:
          - ON for at most 1s
          - OFF for at least 0.5s
        then:           
          - cover.close: shade          

  - platform: gpio
    pin: 
      number: GPIO05
      inverted: true      
    id: ${device_name}_sensor_up
    entity_category: diagnostic    
    icon: mdi:blinds-open    
    name: Up
    on_press:
      then:
        - cover.open: shade    
    on_multi_click:
      - timing:
          - ON for at most 1s
          - OFF for at least 0.5s
        then: 
          - cover.open: shade      
      - timing:
          - ON for at most 1s
          - OFF for at most 0.3s
          - ON for at most 1s
          - OFF for at least 0.2s
        then:           
          - cover.control:
              id: shade
              position: 75%          

  - platform: gpio
    pin: 
      number: GPIO3
      inverted: true      
    entity_category: diagnostic
    icon: mdi:stop
    id: ${device_name}_sensor_stop
    name: Stop
    on_press:
      then:
        - cover.stop: shade        
    on_multi_click:
      - timing:
          - ON for at most 1s
          - OFF for at least 0.5s
        then: 
          - cover.stop: shade      
      - timing:
          - ON for at most 1s
          - OFF for at most 0.3s
          - ON for at most 1s
          - OFF for at least 0.2s
        then:           
          - cover.control:
              id: shade
              position: 50%