Socket error on client <unknown>

[Wolfbad]

Hi,
I have used you project to create a fingerprint access for my home assistant.
I haven't received any error on compiling the code, the esp is correctly connected to my wifi, but in the mqtt broker hassio component I see an endless errors list like "New connection from 192.168.. on port 1883. Socket error on client , disconnecting."
Obviously the esp ip is correct.

[vinz486]

Seems like an issue HA side: are you sure that MQTT username and password are ok?

[Wolfbad]

Yes, the mqtt are ok Il giorno lun 17 mag 2021 alle ore 21:58 Vincenzo Tarricone < ***@***.***> ha scritto:

…

Seems like an issue HA side: are you sure that MQTT username and password are ok? — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#3 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AOZ3ZHPCV6DLLGEC3HDG4DTTOFYPRANCNFSM4462WUZA> .

[vinz486]

Are you able to "sniff" traffic using Wireshark or tcpdump?

[Wolfbad]

yes, however now it run, but with the original project Il giorno lun 17 mag 2021 alle ore 22:03 Vincenzo Tarricone < ***@***.***> ha scritto:

…

Are you able to "sniff" traffic using Wireshark or tcpdump? — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#3 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AOZ3ZHLJRJPEWAP7A3KSJILTOFZBTANCNFSM4462WUZA> .

[vinz486]

What string do you put as gate name?

[Wolfbad]

main Il giorno lun 17 mag 2021 alle ore 22:12 Vincenzo Tarricone < ***@***.***> ha scritto:

…

What string do you put as gate name? — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#3 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AOZ3ZHNBFVDWHIKSJTLUYVDTOF2EFANCNFSM4462WUZA> .

[vinz486]

Hi,
sorry but the issue must be reproducible: try using tcpdump, mqtt is not TLS and you can see what happens in clear text.