*WM: settings invalidated - with missing Sensor

[Tonitom]

The fingerprint sensor is still on the way, so I wanted to prepare the controller already.
But the controller does not appear in the WLAN and I get these messages in the monitor. Is the missing sensor affecting the Wifi Manager?

---

Welcome to Fingerprint-MQTT sensor
RESET DEVICE
*WM: settings invalidated
�� THIS MAY CAUSE AP NOT TO START UP PROPERLY. YOU NEED TO COMMENT IT OUT AFTER ERASING THE DATA.

Welcome to Fingerprint-MQTT sensor
Device reset not detected.
Looking for sensor...KO.
Sensor not found: check serial connection on green/yellow cables.
��

---

And thank you for your project, I've been waiting 5 years for such a product, now I have to build it myself because there's still nothing to buy.

[vinz486]

Yes, there is a startup code that need to communicate with the sensor device.

[Tonitom]

Thanks.
Good to know that everything is going as expected. Then I'll wait until the sensor is delivered.

Do you know of a good Github project with the same controller together with the RC522 RFID reader? I'm just realising that a whole new world is opening up with MQTT.

[vinz486]

Sorry but I don't know that reader.

[Tonitom]

Thanks, works great