traefik.sample.toml

################################################################
# Global configuration
################################################################

# Timeout in seconds.
# Duration to give active requests a chance to finish during hot-reloads
#
# Optional
# Default: 10
#
# graceTimeOut = 10

# Traefik logs file
# If not defined, logs to stdout
#
# Optional
#
# traefikLogsFile = "log/traefik.log"

# Access logs file
#
# Optional
#
# accessLogsFile = "log/access.log"

# Log level
#
# Optional
# Default: "ERROR"
#
# logLevel = "ERROR"

# Backends throttle duration: minimum duration between 2 events from providers
# before applying a new configuration. It avoids unnecessary reloads if multiples events
# are sent in a short amount of time.
#
# Optional
# Default: "2s"
#
# ProvidersThrottleDuration = "5s"

# If non-zero, controls the maximum idle (keep-alive) to keep per-host.  If zero, DefaultMaxIdleConnsPerHost is used.
# If you encounter 'too many open files' errors, you can either change this value, or change `ulimit` value.
#
# Optional
# Default: http.DefaultMaxIdleConnsPerHost
#
# MaxIdleConnsPerHost = 200

# If set to true invalid SSL certificates are accepted for backends.
# Note: This disables detection of man-in-the-middle attacks so should only be used on secure backend networks.
# Optional
# Default: false
#
# InsecureSkipVerify = true

# Entrypoints to be used by frontends that do not specify any entrypoint.
# Each frontend can specify its own entrypoints.
#
# Optional
# Default: ["http"]
#
# defaultEntryPoints = ["http", "https"]

# Enable ACME (Let's Encrypt): automatic SSL
#
# Optional
#
# [acme]

# Email address used for registration
#
# Required
#
# email = "test@traefik.io"

# File used for certificates storage.
# WARNING, if you use Traefik in Docker, don't forget to mount this file as a volume.
#
# Required
#
# storageFile = "acme.json"

# Entrypoint to proxy acme challenge to.
# WARNING, must point to an entrypoint on port 443
#
# Required
#
# entryPoint = "https"

# Enable on demand certificate. This will request a certificate from Let's Encrypt during the first TLS handshake for a hostname that does not yet have a certificate.
# WARNING, TLS handshakes will be slow when requesting a hostname certificate for the first time, this can leads to DoS attacks.
# WARNING, Take note that Let's Encrypt have rate limiting: https://community.letsencrypt.org/t/quick-start-guide/1631
#
# Optional
#
# onDemand = true

# CA server to use
# Uncomment the line to run on the staging let's encrypt server
# Leave comment to go to prod
#
# Optional
#
# caServer = "https://acme-staging.api.letsencrypt.org/directory"

# Domains list
# You can provide SANs (alternative domains) to each main domain
#
# [[acme.domains]]
#   main = "local1.com"
#   sans = ["test1.local1.com", "test2.local1.com"]
# [[acme.domains]]
#   main = "local2.com"
#   sans = ["test1.local2.com", "test2x.local2.com"]
# [[acme.domains]]
#   main = "local3.com"
# [[acme.domains]]
#   main = "local4.com"


# Entrypoints definition
#
# Optional
# Default:
# [entryPoints]
#   [entryPoints.http]
#   address = ":80"
#
# To redirect an http entrypoint to an https entrypoint (with SNI support):
# [entryPoints]
#   [entryPoints.http]
#   address = ":80"
#     [entryPoints.http.redirect]
#       entryPoint = "https"
#   [entryPoints.https]
#   address = ":443"
#     [entryPoints.https.tls]
#       [[entryPoints.https.tls.certificates]]
#       CertFile = "integration/fixtures/https/snitest.com.cert"
#       KeyFile = "integration/fixtures/https/snitest.com.key"
#       [[entryPoints.https.tls.certificates]]
#       CertFile = "integration/fixtures/https/snitest.org.cert"
#       KeyFile = "integration/fixtures/https/snitest.org.key"
#
# To redirect an entrypoint rewriting the URL:
# [entryPoints]
#   [entryPoints.http]
#   address = ":80"
#     [entryPoints.http.redirect]
#       regex = "^http://localhost/(.*)"
#       replacement = "http://mydomain/$1"
#
# To enable basic auth on an entrypoint
# with 2 user/pass: test:test and test2:test2
# Passwords can be encoded in MD5, SHA1 and BCrypt: you can use htpasswd to generate those ones
# [entryPoints]
#   [entryPoints.http]
#   address = ":80"
#   [entryPoints.http.auth.basic]
#   users = ["test:$apr1$H6uskkkW$IgXLP6ewTrSuBkTrqE8wj/", "test2:$apr1$d9hr9HBB$4HxwgUir3HP4EsggP/QNo0"]
#
# To enable digest auth on an entrypoint
# with 2 user/realm/pass: test:traefik:test and test2:traefik:test2
# You can use htdigest to generate those ones
# [entryPoints]
#   [entryPoints.http]
#   address = ":80"
#   [entryPoints.http.auth.basic]
#   users = ["test:traefik:a2688e031edb4be6a3797f3882655c05 ", "test2:traefik:518845800f9e2bfb1f1f740ec24f074e"]


# Enable retry sending request if network error
#
# Optional
#
# [retry]

# Number of attempts
#
# Optional
# Default: (number servers in backend) -1
#
# attempts = 3

################################################################
# Web configuration backend
################################################################

# Enable web configuration backend
#
# Optional
#
# [web]

# Web administration port
#
# Required
#
# address = ":8080"

# SSL certificate and key used
#
# Optional
#
# CertFile = "traefik.crt"
# KeyFile = "traefik.key"
#
# Set REST API to read-only mode
#
# Optional
# ReadOnly = false


################################################################
# File configuration backend
################################################################

# Enable file configuration backend
#
# Optional
#
# [file]

# Rules file
# If defined, traefik will load rules from this file,
# otherwise, it will load rules from current file (cf Sample rules below).
#
# Optional
#
# filename = "rules.toml"

# Enable watch file changes
#
# Optional
#
# watch = true


################################################################
# Docker configuration backend
################################################################

# Enable Docker configuration backend
#
# Optional
#
# [docker]

# Docker server endpoint. Can be a tcp or a unix socket endpoint.
#
# Required
#
# endpoint = "unix:///var/run/docker.sock"

# Default domain used.
# Can be overridden by setting the "traefik.domain" label on a container.
#
# Required
#
# domain = "docker.localhost"

# Enable watch docker changes
#
# Optional
#
# watch = true

# Override default configuration template. For advanced users :)
#
# Optional
#
# filename = "docker.tmpl"

# Expose containers by default in traefik
#
# Optional
# Default: true
#
# exposedbydefault = true

# Enable docker TLS connection
#
# Optional
#
#  [docker.tls]
#  ca = "/etc/ssl/ca.crt"
#  cert = "/etc/ssl/docker.crt"
#  key = "/etc/ssl/docker.key"
#  insecureskipverify = true


################################################################
# Mesos/Marathon configuration backend
################################################################

# Enable Marathon configuration backend
#
# Optional
#
# [marathon]

# Marathon server endpoint.
# You can also specify multiple endpoint for Marathon:
# endpoint := "http://10.241.1.71:8080,10.241.1.72:8080,10.241.1.73:8080"
#
# Required
#
# endpoint = "http://127.0.0.1:8080"

# Enable watch Marathon changes
#
# Optional
#
# watch = true

# Default domain used.
# Can be overridden by setting the "traefik.domain" label on an application.
#
# Required
#
# domain = "marathon.localhost"

# Override default configuration template. For advanced users :)
#
# Optional
#
# filename = "marathon.tmpl"

# Expose Marathon apps by default in traefik
#
# Optional
# Default: false
#
# exposedByDefault = true

# Convert Marathon groups to subdomains
# Default behavior: /foo/bar/myapp => foo-bar-myapp.{defaultDomain}
# with groupsAsSubDomains enabled: /foo/bar/myapp => myapp.bar.foo.{defaultDomain}
#
# Optional
# Default: false
#
# groupsAsSubDomains = true

# Enable Marathon basic authentication
#
# Optional
#
#  [marathon.basic]
#  httpBasicAuthUser = "foo"
#  httpBasicPassword = "bar"

# DCOSToken for DCOS environment, This will override the Authorization header
#
# Optional
#
# dcosToken = "xxxxxx"


################################################################
# Mesos configuration backend
################################################################

# Enable Mesos configuration backend
#
# Optional
#
# [mesos]

# Mesos server endpoint.
# You can also specify multiple endpoint for Mesos:
# endpoint = "192.168.35.40:5050,192.168.35.41:5050,192.168.35.42:5050"
# endpoint = "zk://192.168.35.20:2181,192.168.35.21:2181,192.168.35.22:2181/mesos"
#
# Required
#
# endpoint = "http://127.0.0.1:8080"

# Enable watch Mesos changes
#
# Optional
#
# watch = true

# Default domain used.
# Can be overridden by setting the "traefik.domain" label on an application.
#
# Required
#
# domain = "mesos.localhost"

# Override default configuration template. For advanced users :)
#
# Optional
#
# filename = "mesos.tmpl"

# Expose Mesos apps by default in traefik
#
# Optional
# Default: false
#
# ExposedByDefault = true

# TLS client configuration. https://golang.org/pkg/crypto/tls/#Config
#
# Optional
#
# [mesos.TLS]
# InsecureSkipVerify = true

#
#
# Optional
#
# ZkDetectionTimeout = 30

#
#
# Optional
#
# RefreshSeconds = 30

#
#
# Optional
#
# IPSources = "host"

################################################################
# Kubernetes Ingress configuration backend
################################################################
# Enable Kubernetes Ingress configuration backend
#
# Optional
#
# [kubernetes]

# Kubernetes server endpoint
#
# When deployed as a replication controller in Kubernetes,
# Traefik will use env variable KUBERNETES_SERVICE_HOST
# and KUBERNETES_SERVICE_PORT_HTTPS as endpoint
# Secure token will be found in /var/run/secrets/kubernetes.io/serviceaccount/token
# and SSL CA cert in /var/run/secrets/kubernetes.io/serviceaccount/ca.crt
#
# Optional
#
# endpoint = "http://localhost:8080"
# namespaces = ["default"]
#
# See: http://kubernetes.io/docs/user-guide/labels/#list-and-watch-filtering
# labelselector = "A and not B"

################################################################
# Consul KV configuration backend
################################################################

# Enable Consul KV configuration backend
#
# Optional
#
# [consul]

# Consul server endpoint
#
# Required
#
# endpoint = "127.0.0.1:8500"

# Enable watch Consul changes
#
# Optional
#
# watch = true

# Prefix used for KV store.
#
# Optional
#
# prefix = "/traefik"

# Override default configuration template. For advanced users :)
#
# Optional
#
# filename = "consul.tmpl"

# Enable consul TLS connection
#
# Optional
#
# [consul.tls]
# ca = "/etc/ssl/ca.crt"
# cert = "/etc/ssl/consul.crt"
# key = "/etc/ssl/consul.key"
# insecureskipverify = true


################################################################
# Etcd configuration backend
################################################################

# Enable Etcd configuration backend
#
# Optional
#
# [etcd]

# Etcd server endpoint
#
# Required
#
# endpoint = "127.0.0.1:2379"

# Enable watch Etcd changes
#
# Optional
#
# watch = true

# Prefix used for KV store.
#
# Optional
#
# prefix = "/traefik"

# Override default configuration template. For advanced users :)
#
# Optional
#
# filename = "etcd.tmpl"

# Enable etcd TLS connection
#
# Optional
#
# [etcd.tls]
# ca = "/etc/ssl/ca.crt"
# cert = "/etc/ssl/etcd.crt"
# key = "/etc/ssl/etcd.key"
# insecureskipverify = true


################################################################
# Zookeeper configuration backend
################################################################

# Enable Zookeeperconfiguration backend
#
# Optional
#
# [zookeeper]

# Zookeeper server endpoint
#
# Required
#
# endpoint = "127.0.0.1:2181"

# Enable watch Zookeeper changes
#
# Optional
#
# watch = true

# Prefix used for KV store.
#
# Optional
#
# prefix = "/traefik"

# Override default configuration template. For advanced users :)
#
# Optional
#
# filename = "zookeeper.tmpl"


################################################################
# BoltDB configuration backend
################################################################

# Enable BoltDB configuration backend
#
# Optional
#
# [boltdb]

# BoltDB file
#
# Required
#
# endpoint = "/my.db"

# Enable watch BoltDB changes
#
# Optional
#
# watch = true

# Prefix used for KV store.
#
# Optional
#
# prefix = "/traefik"

# Override default configuration template. For advanced users :)
#
# Optional
#
# filename = "boltdb.tmpl"




################################################################
# Sample rules
################################################################
# [backends]
#   [backends.backend1]
#     [backends.backend1.circuitbreaker]
#       expression = "NetworkErrorRatio() > 0.5"
#     [backends.backend1.servers.server1]
#     url = "http://172.17.0.2:80"
#     weight = 10
#     [backends.backend1.servers.server2]
#     url = "http://172.17.0.3:80"
#     weight = 1
#   [backends.backend2]
#     [backends.backend2.LoadBalancer]
#       method = "drr"
#     [backends.backend2.servers.server1]
#     url = "http://172.17.0.4:80"
#     weight = 1
#     [backends.backend2.servers.server2]
#     url = "http://172.17.0.5:80"
#     weight = 2
#
# [frontends]
#   [frontends.frontend1]
#   backend = "backend2"
#     [frontends.frontend1.routes.test_1]
#     rule = "Host: test.localhost, other.localhost"
#   [frontends.frontend2]
#   backend = "backend1"
#   passHostHeader = true
#   entrypoints = ["https"] # overrides defaultEntryPoints
#     [frontends.frontend2.routes.test_1]
#     rule = "Host:{subdomain:[a-z]+}.localhost"
#   [frontends.frontend3]
#   entrypoints = ["http", "https"] # overrides defaultEntryPoints
#   backend = "backend2"
#     rule = "Path: /test, /other"