diff --git a/README.md b/README.md
index 6953e643..493c9224 100644
--- a/README.md
+++ b/README.md
@@ -1,6 +1,6 @@
 # Gravity Sync
 ## Background
-What is better than a [Pi-hole](https://github.com/pi-hole/pi-hole) blocking ads via DNS on your network? That's right, Two Pi-hole! But if you have more than one Pi-hole (PH) in your network you'll want a simple way to keep the list configurations identical between the two.
+What is better than a [Pi-hole](https://github.com/pi-hole/pi-hole) blocking ads via DNS on your network? That's right, Two Pi-hole! But if you have more than one Pi-hole in your network you'll want a simple way to keep the list configurations identical between the two.
 
 That's Gravity Sync.
 
@@ -13,7 +13,7 @@ Gravity Sync will **not** overwrite device specific settings such as local netwo
 ## Prerequisites
 Gravity Sync **requires** Pi-hole 5.0 or higher.
 
-You will need to designate one Pi-Hole as primary and one as secondary. This is where you'll make all your configuration changes through the Web UI, doing things such as; manual whitelisting, adding blocklists, device/group management, and other list settings. Gravity Sync will pull the configuration of the primary PH to the secondary. It will also bring over the downloaded blocklist files after a `pihole -g` update on the primary, so you do not need to reach out to all your blocklist hosts for updates after syncing.
+You will need to designate one Pi-Hole as primary and one as secondary. This is where you'll make all your configuration changes through the Web UI, doing things such as; manual whitelisting, adding blocklists, device/group management, and other list settings. Gravity Sync will pull the configuration of the primary Pi-hole to the secondary. It will also bring over the downloaded blocklist files after a `pihole -g` update on the primary, so you do not need to reach out to all your blocklist hosts for updates after syncing.
 
 The designation of primary and secondary is purely at your discretion and depends on your desired use case.
 
@@ -44,9 +44,9 @@ Download the latest release from [GitHub](https://github.com/vmstan/gravity-sync
 
 ```bash
 cd ~
-wget https://github.com/vmstan/gravity-sync/archive/v1.5.0.zip
-unzip v1.5.0.zip
-mv ~/gravity-sync-1.5.0 ~/gravity-sync
+wget https://github.com/vmstan/gravity-sync/archive/v1.6.0zip
+unzip v1.6.0.zip
+mv ~/gravity-sync-1.6.0 ~/gravity-sync
 cd gravity-sync
 ```
 
@@ -95,7 +95,7 @@ Gravity Sync uses SSH to run commands on the primary Pi-hole, and sync the two s
 #### Key-Pair Authentication
 This is the preferred option, as it's more reliable and less dependant on third party plugins.
 
-You'll need to generate an SSH key for your secondary PH user and copy it to your primary PH. This will allow you to connect to and copy the gravity.db file without needing a password each time. When generating the SSH key, accept all the defaults and do not put a passphrase on your key file.
+You'll need to generate an SSH key for your secondary Pi-hole user and copy it to your primary Pi-hole. This will allow you to connect to and copy the gravity.db file without needing a password each time. When generating the SSH key, accept all the defaults and do not put a passphrase on your key file.
 
 *Note: If you already have this setup on your systems for other purposes, you can skip this step.*
 
@@ -104,12 +104,12 @@ ssh-keygen -t rsa
 ssh-copy-id -i ~/.ssh/id_rsa.pub REMOTE_USER@REMOTE_HOST
 ```
 
-Subsitute REMOTE_USER for the account on the primary PH with sudo permissions, and REMOTE_HOST for the IP or DNS name of the PH you have designated as the primary. 
+Subsitute REMOTE_USER for the account on the primary Pi-hole with sudo permissions, and REMOTE_HOST for the IP or DNS name of the Pi-hole you have designated as the primary. 
 
 Make sure to leave the `REMOTE_PASS` variable set to nothing in `gravity-sync.conf` if you want to use key-pair authentication.
 
 #### Password Authentication
-This is the non-preferred option, as it depends on an non-standard utility called `sshpass` which must be installed on your secondary PH. Install it using your package manager of choice. The example below is for Raspberry Pi OS (previously Raspbian) or Ubuntu.
+This is the non-preferred option, as it depends on an non-standard utility called `sshpass` which must be installed on your secondary Pi-hole. Install it using your package manager of choice. The example below is for Raspberry Pi OS (previously Raspbian) or Ubuntu.
 
 ```bash
 sudo apt install sshpass
@@ -126,13 +126,13 @@ Gravity Sync will validate that the `sshpass` utility is installed on your syste
 Save. Keep calm, carry on.
 
 ## Execution
-Now test the script. You can run a comparison between the two which will be non-distruptive and see if everything has been configured correctly.
+Now, test Gravity Sync. You can run a comparison between primary and secondary databases, which will be non-distruptive, and see if everything has been configured correctly.
 
 ```bash
 ./gravity-sync.sh compare
 ```
 
-Assuming Gravity Sync runs successfully, it'll indicate if there are changes pending between the two databases. If not, I suggest making a subtle change to a whitelist/blacklist on your primary PH, such as changing a description field or disabling a whitelist item, and then running `./gravity-sync.sh compare` again to validate your installation is working correctly.
+Assuming Gravity Sync runs successfully, it will indicate if there are changes pending between the two databases. If not, make a subtle change to a whitelist/blacklist on your primary Pi-hole, such as changing a description field or disabling a whitelist item, and then running `./gravity-sync.sh compare` again to validate your installation is working correctly.
 
 ### The Pull Function
 
@@ -142,20 +142,31 @@ The Gravity Sync Pull, is the standard method of sync operation, and will not pr
 ./gravity-sync.sh pull
 ```
 
-If the execution completes, you will now have overwritten your running gravity.db on the secondary PH after creating a copy of the running database (`gravity.db.backup`) in the `backup` subfolder located with your script. Gravity Sync will also keep a copy of the last sync'd gravity.db from the master, in the `backup` folder identified as `gravity.db.pull` for future use. 
+If the execution completes, you will now have overwritten your running gravity.db on the secondary Pi-hole after creating a copy of the running database (`gravity.db.backup`) in the `backup` subfolder located with your script. Gravity Sync will also keep a copy of the last sync'd gravity.db from the primary (in the `backup` folder identified as `gravity.db.pull`) for future use. 
 
 Finally, a file called `gravity-sync.log` will be created in the `gravity-sync` folder along side the script with the date the script was last executed appended to the bottom.
 
 You can check for successful pull attempts by running: `./gravity-sync.sh logs`
 
 ### The Push Function
-Gravity Sync includes the ability to `push` from the secondary PH back to the primary. This would be useful in a situation where your primary PH is down for an extended period of time, and you have made list changes on the secondary PH that you want to force back to the primary, when it comes online.
+Gravity Sync includes the ability to `push` from the secondary Pi-hole back to the primary. This would be useful in a situation where your primary Pi-hole is down for an extended period of time, and you have made list changes on the secondary Pi-hole that you want to force back to the primary, when it comes online.
 
 ```bash
 ./gravity-sync.sh push
 ```
 
-Before executing, this will make a copy of the remote database under `backup/gravity.db.push` then sync the local configuration to the primary PH.
+Before executing, this will make a copy of the remote database under `backup/gravity.db.push` then sync the local configuration to the primary Pi-hole.
+
+This function purposefuly asks for user interaction to avoid being accidentally automated.
+
+### The Restore Function
+Graviy Sync can also `restore` the database on the secondary Pi-hole in the event you've overwritten it accidentally. This might happen in the above scenario where you've had your primary Pi-hole down for an extended period, made changes to the secondary, but perhaps didn't get a chance to perform a `push` of the changes back to the primary, before your automated sync ran.
+
+```bash
+./gravity-sync.sh restore
+```
+
+This will copy your last `gravity.db.backup` to the running copy on the secondary Pi-hole.
 
 This function purposefuly asks for user interaction to avoid being accidentally automated.
 
@@ -225,3 +236,5 @@ chmod +x gravity-sync.sh
 - If you'd like to know what version of the script you have running by running `./gravity-sync.sh version` 
 - If the update script fails, make sure you did your original deployment via `git clone` and not a manual install. 
 - If it doesn't kick off, you can manually execute a `git pull` while in the `gravity-sync` directory. 
+
+If all else fails, delete the entire `gravity-sync` folder from your system and re-deploy. This will have no impact on your replicated databases. 
diff --git a/gravity-sync.conf.example b/gravity-sync.conf.example
index 62c679eb..a56cdc65 100644
--- a/gravity-sync.conf.example
+++ b/gravity-sync.conf.example
@@ -25,4 +25,5 @@ REMOTE_PASS=''
 # SSH_PKIF=''
 # LOG_PATH=''
 # SYNCING_LOG=''
-# CRONJOB_LOG=''
\ No newline at end of file
+# CRONJOB_LOG=''
+# VERIFY_PASS=''    # 0=Verify 1=Bypass
\ No newline at end of file
diff --git a/gravity-sync.sh b/gravity-sync.sh
index 8747eb66..4f6de427 100755
--- a/gravity-sync.sh
+++ b/gravity-sync.sh
@@ -2,7 +2,7 @@
 
 # GRAVITY SYNC BY VMSTAN #####################
 PROGRAM='Gravity Sync'
-VERSION='1.5.0'
+VERSION='1.6.0'
 
 # Execute from the home folder of the user who owns it (ex: 'cd ~/gravity-sync')
 # For documentation or downloading updates visit https://github.com/vmstan/gravity-sync
@@ -24,10 +24,13 @@ LOG_PATH="$HOME/${LOCAL_FOLDR}"		# replace in gravity-sync.conf to overwrite
 SYNCING_LOG='gravity-sync.log' 		# replace in gravity-sync.conf to overwrite
 CRONJOB_LOG='gravity-sync.cron' 	# replace in gravity-sync.conf to overwrite
 
-# PH Folder/File Locations
-PIHOLE_DIR='/etc/pihole' 			# default PH data directory
-GRAVITY_FI='gravity.db' 			# default PH database file
-PIHOLE_BIN='/usr/local/bin/pihole' 	# default PH binary directory
+# Interaction Customization
+VERIFY_PASS='0'						# replace in gravity-sync.conf to overwrite
+
+# Pi-hole Folder/File Locations
+PIHOLE_DIR='/etc/pihole' 			# default Pi-hole data directory
+GRAVITY_FI='gravity.db' 			# default Pi-hole database file
+PIHOLE_BIN='/usr/local/bin/pihole' 	# default Pi-hole binary directory
 
 # OS Settings
 BASH_PATH='/bin/bash'				# default OS bash path
@@ -73,12 +76,12 @@ function import_gs {
 			error_validate
 			
 		MESSAGE="Using ${REMOTE_USER}@${REMOTE_HOST}"
-		echo -e "${INFO} ${MESSAGE}"
+		echo_info
 	else
-		echo -e "\r${FAIL} ${MESSAGE}"
+		echo_fail
 		
 		MESSAGE="${CONFIG_FILE} Missing"
-		echo -e "${INFO} ${MESSAGE}"
+		echo_info
 
 		TASKTYPE='CONFIG'
 		config_generate
@@ -93,7 +96,7 @@ function update_gs {
 	# logs_export 	# dumps log prior to execution because script stops after successful pull
 	
 	MESSAGE="Requires GitHub Installation" 
-	echo -e "${INFO} ${MESSAGE}"
+	echo_info
 		git reset --hard
 		git pull
 	exit
@@ -105,7 +108,7 @@ function beta_gs {
 	# logs_export 	# dumps log prior to execution because script stops after successful pull
 	
 	MESSAGE="Requires GitHub Installation" 
-	echo -e "${INFO} ${MESSAGE}"
+	echo_info
 		git reset --hard
 		git fetch origin
 		git pull origin development
@@ -115,77 +118,72 @@ function beta_gs {
 # Gravity Core Functions
 ## Pull Function
 function pull_gs {
-	TASKTYPE='PULL'
-	
-	echo -e "${INFO} ${TASKTYPE} Requested"
 	md5_compare
 	
-	echo -e "${INFO} ${TASKTYPE} Commencing"
-	
 	MESSAGE="Backing Up ${GRAVITY_FI} on $HOSTNAME"
-	echo -en "${STAT} ${MESSAGE}"
+	echo_stat
 		cp ${PIHOLE_DIR}/${GRAVITY_FI} $HOME/${LOCAL_FOLDR}/${BACKUP_FOLD}/${GRAVITY_FI}.backup >/dev/null 2>&1
 		error_validate
 	
 	MESSAGE="Pulling ${GRAVITY_FI} from ${REMOTE_HOST}"
-	echo -en "${STAT} ${MESSAGE}"
+	echo_stat
 		${SSHPASSWORD} rsync -e "ssh -p ${SSH_PORT} -i $HOME/${SSH_PKIF}" ${REMOTE_USER}@${REMOTE_HOST}:${PIHOLE_DIR}/${GRAVITY_FI} $HOME/${LOCAL_FOLDR}/${BACKUP_FOLD}/${GRAVITY_FI}.pull >/dev/null 2>&1
 		error_validate
 		
 	MESSAGE="Replacing ${GRAVITY_FI} on $HOSTNAME"
-	echo -en "${STAT} ${MESSAGE}"	
+	echo_stat	
 		sudo cp $HOME/${LOCAL_FOLDR}/${BACKUP_FOLD}/${GRAVITY_FI}.pull ${PIHOLE_DIR}/${GRAVITY_FI} >/dev/null 2>&1
 		error_validate
 	
 	MESSAGE="Validating Ownership on ${GRAVITY_FI}"
-	echo -en "${STAT} ${MESSAGE}"
+	echo_stat
 		
 		GRAVDB_OWN=$(ls -ld ${PIHOLE_DIR}/${GRAVITY_FI} | awk '{print $3 $4}')
 		if [ $GRAVDB_OWN == "piholepihole" ]
 		then
-			echo -e "\r${GOOD} ${MESSAGE}"
+			echo_good
 		else
-			echo -e "\r${FAIL} $MESSAGE"
+			echo_fail
 			
-			MESSAGE2="Attempting to Compensate"
-			echo -e "${INFO} ${MESSAGE2}"
+			MESSAGE="Attempting to Compensate"
+			echo_info
 			
 			MESSAGE="Setting Ownership on ${GRAVITY_FI}"
-			echo -en "${STAT} ${MESSAGE}"	
+			echo_stat	
 				sudo chown pihole:pihole ${PIHOLE_DIR}/${GRAVITY_FI} >/dev/null 2>&1
 				error_validate
 		fi
 		
 	MESSAGE="Validating Permissions on ${GRAVITY_FI}"
-	echo -en "${STAT} ${MESSAGE}"
+	echo_stat
 	
 		GRAVDB_RWE=$(namei -m ${PIHOLE_DIR}/${GRAVITY_FI} | grep -v f: | grep ${GRAVITY_FI} | awk '{print $1}')
 		if [ $GRAVDB_RWE = "-rw-rw-r--" ]
 		then
-			echo -e "\r${GOOD} ${MESSAGE}"
+			echo_good
 		else
-			echo -e "\r${FAIL} ${MESSAGE}"
+			echo_fail
 				
-			MESSAGE2="Attempting to Compensate"
-			echo -e "${INFO} ${MESSAGE2}"
+			MESSAGE="Attempting to Compensate"
+			echo_info
 		
 			MESSAGE="Setting Ownership on ${GRAVITY_FI}"
-			echo -en "${STAT} ${MESSAGE}"
+			echo_stat
 				sudo chmod 664 ${PIHOLE_DIR}/${GRAVITY_FI} >/dev/null 2>&1
 				error_validate
 		fi
 		
 	MESSAGE="Inverting Tachyon Pulse"
-	echo -e "${INFO} ${MESSAGE}"
+	echo_info
 		sleep 1	
 	
 	MESSAGE="Updating FTLDNS Configuration"
-	echo -en "${STAT} ${MESSAGE}"
+	echo_stat
 		${PIHOLE_BIN} restartdns reloadlists >/dev/null 2>&1
 		error_validate
 	
 	MESSAGE="Reloading FTLDNS Services"
-	echo -en "${STAT} ${MESSAGE}"
+	echo_stat
 		${PIHOLE_BIN} restartdns >/dev/null 2>&1
 		error_validate
 	
@@ -195,66 +193,122 @@ function pull_gs {
 
 ## Push Function
 function push_gs {
-	TASKTYPE='PUSH'
-	
-	echo -e "${INFO} ${TASKTYPE} Requested"
 	md5_compare
 	
-	echo -e "${WARN} Are you sure you want to overwrite the primary PH configuration on ${REMOTE_HOST}?"
-	select yn in "Yes" "No"; do
-		case $yn in
-		Yes )
-			
-			MESSAGE="Backing Up ${GRAVITY_FI} from ${REMOTE_HOST}"
-			echo -en "${STAT} ${MESSAGE}"
-				${SSHPASSWORD} rsync -e "ssh -p ${SSH_PORT} -i $HOME/${SSH_PKIF}" ${REMOTE_USER}@${REMOTE_HOST}:${PIHOLE_DIR}/${GRAVITY_FI} $HOME/${LOCAL_FOLDR}/${BACKUP_FOLD}/${GRAVITY_FI}.push >/dev/null 2>&1
-				error_validate
+	intent_validate
+
+	MESSAGE="Backing Up ${GRAVITY_FI} from ${REMOTE_HOST}"
+	echo_stat
+		${SSHPASSWORD} rsync -e "ssh -p ${SSH_PORT} -i $HOME/${SSH_PKIF}" ${REMOTE_USER}@${REMOTE_HOST}:${PIHOLE_DIR}/${GRAVITY_FI} $HOME/${LOCAL_FOLDR}/${BACKUP_FOLD}/${GRAVITY_FI}.push >/dev/null 2>&1
+		error_validate
+
+	MESSAGE="Pushing ${GRAVITY_FI} to ${REMOTE_HOST}"
+	echo_stat
+		${SSHPASSWORD} rsync --rsync-path="sudo rsync" -e "ssh -p ${SSH_PORT} -i $HOME/${SSH_PKIF}" ${PIHOLE_DIR}/${GRAVITY_FI} ${REMOTE_USER}@${REMOTE_HOST}:${PIHOLE_DIR}/${GRAVITY_FI} >/dev/null 2>&1
+		error_validate
+
+	MESSAGE="Setting Permissions on ${GRAVITY_FI}"
+	echo_stat	
+		${SSHPASSWORD} ssh -p ${SSH_PORT} -i "$HOME/${SSH_PKIF}" ${REMOTE_USER}@${REMOTE_HOST} "sudo chmod 664 ${PIHOLE_DIR}/${GRAVITY_FI}" >/dev/null 2>&1
+		error_validate
+
+	MESSAGE="Setting Ownership on ${GRAVITY_FI}"
+	echo_stat	
+		${SSHPASSWORD} ssh -p ${SSH_PORT} -i "$HOME/${SSH_PKIF}" ${REMOTE_USER}@${REMOTE_HOST} "sudo chown pihole:pihole ${PIHOLE_DIR}/${GRAVITY_FI}" >/dev/null 2>&1
+		error_validate	
+
+	MESSAGE="Contacting Borg Collective"
+	echo_info
+		sleep 1	
+
+	MESSAGE="Updating FTLDNS Configuration"
+	echo_stat
+		${SSHPASSWORD} ssh -p ${SSH_PORT} -i "$HOME/${SSH_PKIF}" ${REMOTE_USER}@${REMOTE_HOST} "${PIHOLE_BIN} restartdns reloadlists" >/dev/null 2>&1
+		error_validate
 	
-			MESSAGE="Pushing ${GRAVITY_FI} to ${REMOTE_HOST}"
-			echo -en "${STAT} ${MESSAGE}"
-				${SSHPASSWORD} rsync --rsync-path="sudo rsync" -e "ssh -p ${SSH_PORT} -i $HOME/${SSH_PKIF}" ${PIHOLE_DIR}/${GRAVITY_FI} ${REMOTE_USER}@${REMOTE_HOST}:${PIHOLE_DIR}/${GRAVITY_FI} >/dev/null 2>&1
-				error_validate
+	MESSAGE="Reloading FTLDNS Services"
+	echo_stat	
+		${SSHPASSWORD} ssh -p ${SSH_PORT} -i "$HOME/${SSH_PKIF}" ${REMOTE_USER}@${REMOTE_HOST} "${PIHOLE_BIN} restartdns" >/dev/null 2>&1
+		error_validate
 	
-			MESSAGE="Setting Permissions on ${GRAVITY_FI}"
-			echo -en "${STAT} ${MESSAGE}"	
-				${SSHPASSWORD} ssh -p ${SSH_PORT} -i "$HOME/${SSH_PKIF}" ${REMOTE_USER}@${REMOTE_HOST} "sudo chmod 664 ${PIHOLE_DIR}/${GRAVITY_FI}" >/dev/null 2>&1
-				error_validate
+	logs_export
+	exit_withchange
+}
+
+function restore_gs {
+	MESSAGE="This will restore ${GRAVITY_FI} on $HOSTNAME with the previous version!"
+	echo_warn
+
+	intent_validate
+
+	MESSAGE="Restoring ${GRAVITY_FI} on $HOSTNAME"
+	echo_stat	
+		sudo cp $HOME/${LOCAL_FOLDR}/${BACKUP_FOLD}/${GRAVITY_FI}.backup ${PIHOLE_DIR}/${GRAVITY_FI} >/dev/null 2>&1
+		error_validate
+	
+	MESSAGE="Validating Ownership on ${GRAVITY_FI}"
+	echo_stat
 		
+		GRAVDB_OWN=$(ls -ld ${PIHOLE_DIR}/${GRAVITY_FI} | awk '{print $3 $4}')
+		if [ $GRAVDB_OWN == "piholepihole" ]
+		then
+			echo_good
+		else
+			echo_fail
+			
+			MESSAGE="Attempting to Compensate"
+			echo_info
+			
 			MESSAGE="Setting Ownership on ${GRAVITY_FI}"
-			echo -en "${STAT} ${MESSAGE}"	
-				${SSHPASSWORD} ssh -p ${SSH_PORT} -i "$HOME/${SSH_PKIF}" ${REMOTE_USER}@${REMOTE_HOST} "sudo chown pihole:pihole ${PIHOLE_DIR}/${GRAVITY_FI}" >/dev/null 2>&1
-				error_validate	
-	
-			MESSAGE="Contacting Borg Collective"
-			echo -e "${INFO} ${MESSAGE}"
-				sleep 1	
-	
-			MESSAGE="Updating FTLDNS Configuration"
-			echo -en "${STAT} ${MESSAGE}"
-				${SSHPASSWORD} ssh -p ${SSH_PORT} -i "$HOME/${SSH_PKIF}" ${REMOTE_USER}@${REMOTE_HOST} "${PIHOLE_BIN} restartdns reloadlists" >/dev/null 2>&1
+			echo_stat	
+				sudo chown pihole:pihole ${PIHOLE_DIR}/${GRAVITY_FI} >/dev/null 2>&1
 				error_validate
-			
-			MESSAGE="Reloading FTLDNS Services"
-			echo -en "${STAT} ${MESSAGE}"	
-				${SSHPASSWORD} ssh -p ${SSH_PORT} -i "$HOME/${SSH_PKIF}" ${REMOTE_USER}@${REMOTE_HOST} "${PIHOLE_BIN} restartdns" >/dev/null 2>&1
+		fi
+		
+	MESSAGE="Validating Permissions on ${GRAVITY_FI}"
+	echo_stat
+	
+		GRAVDB_RWE=$(namei -m ${PIHOLE_DIR}/${GRAVITY_FI} | grep -v f: | grep ${GRAVITY_FI} | awk '{print $1}')
+		if [ $GRAVDB_RWE = "-rw-rw-r--" ]
+		then
+			echo_good
+		else
+			echo_fail
+				
+			MESSAGE="Attempting to Compensate"
+			echo_info
+		
+			MESSAGE="Setting Ownership on ${GRAVITY_FI}"
+			echo_stat
+				sudo chmod 664 ${PIHOLE_DIR}/${GRAVITY_FI} >/dev/null 2>&1
 				error_validate
-			
-			logs_export
-			exit_withchange
-		;;
+		fi
 		
-		No )
-			exit_nochange
-		;;
-		esac
-	done
+	MESSAGE="Evacuating Saucer Section"
+	echo_info
+		sleep 1	
+	
+	MESSAGE="Updating FTLDNS Configuration"
+	echo_stat
+		${PIHOLE_BIN} restartdns reloadlists >/dev/null 2>&1
+		error_validate
+	
+	MESSAGE="Reloading FTLDNS Services"
+	echo_stat
+		${PIHOLE_BIN} restartdns >/dev/null 2>&1
+		error_validate
+	
+	logs_export
+	exit_withchange
 }
 
 # Logging Functions
 ## Core Logging
 ### Write Logs Out
 function logs_export {
-	echo -e "${INFO} Logging Timestamps to ${SYNCING_LOG}"
+	MESSAGE="Logging Timestamps to ${SYNCING_LOG}"
+	echo_info
+
 	echo -e $(date) "[${TASKTYPE}]" >> ${LOG_PATH}/${SYNCING_LOG}
 }
 
@@ -262,13 +316,16 @@ function logs_export {
 function logs_gs {
 	import_gs
 
-	echo -e "${INFO} Tailing ${LOG_PATH}/${SYNCING_LOG}"
+	MESSAGE="Tailing ${LOG_PATH}/${SYNCING_LOG}"
+	echo_info
+
 	echo -e "========================================================"
 	echo -e "Recent Complete ${YELLOW}PULL${NC} Executions"
 		tail -n 7 "${LOG_PATH}/${SYNCING_LOG}" | grep PULL
 	echo -e "Recent Complete ${YELLOW}PUSH${NC} Executions"
 		tail -n 7 "${LOG_PATH}/${SYNCING_LOG}" | grep PUSH
 	echo -e "========================================================"
+
 	exit_nochange
 }
 
@@ -278,28 +335,37 @@ function show_crontab {
 	import_gs
 	
 	MESSAGE="Replaying Last Cronjob"
-	echo -en "${STAT} ${MESSAGE}"
+	echo_stat
 	
 	if [ -f ${LOG_PATH}/${CRONJOB_LOG} ]
 	then
 		if [ -s ${LOG_PATH}/${CRONJOB_LOG} ]
-			echo -e "\r${GOOD} ${MESSAGE}"
+			echo_good
 			
-			echo -e "${INFO} Tailing ${LOG_PATH}/${CRONJOB_LOG}"
+			MESSAGE="Tailing ${LOG_PATH}/${CRONJOB_LOG}"
+			echo_info
+
 			echo -e "========================================================"
 			date -r ${LOG_PATH}/${CRONJOB_LOG}
 			cat ${LOG_PATH}/${CRONJOB_LOG}
 			echo -e "========================================================"
-				exit_nochange
+
+			exit_nochange
 		then
-			echo -e "\r${FAIL} ${MESSAGE}"
-			echo -e "${INFO} ${LOG_PATH}/${CRONJOB_LOG} appears empty"
-				exit_nochange
+			echo_fail
+
+			MESSAGE="${LOG_PATH}/${CRONJOB_LOG} is Empty"
+			echo_info
+
+			exit_nochange
 		fi
 	else
-		echo -e "\r${FAIL} ${MESSAGE}"
-		echo -e "${INFO} ${LOG_PATH}/${CRONJOB_LOG} not yet created"
-			exit_nochange
+		echo_fail
+
+		MESSAGE="${LOG_PATH}/${CRONJOB_LOG} is Missing"
+		echo_info
+
+		exit_nochange
 	fi
 }
 
@@ -307,35 +373,35 @@ function show_crontab {
 ## Validate GS Folders
 function validate_gs_folders {
 	MESSAGE="Locating $HOME/${LOCAL_FOLDR}"
-	echo -en "${STAT} ${MESSAGE}"
+	echo_stat
 		if [ -d $HOME/${LOCAL_FOLDR} ]
 		then
-	    	echo -e "\r${GOOD} ${MESSAGE}"
+	    	echo_good
 		else
-			echo -e "\r${FAIL} ${MESSAGE}"
+			echo_fail
 			exit_nochange
 		fi
 	
 	MESSAGE="Locating $HOME/${LOCAL_FOLDR}/${BACKUP_FOLD}"
-	echo -en "${STAT} ${MESSAGE}"
+	echo_stat
 		if [ -d $HOME/${LOCAL_FOLDR}/${BACKUP_FOLD} ]
 		then
-	    	echo -e "\r${GOOD} ${MESSAGE}"
+	    	echo_good
 		else
-			echo -e "\r${FAIL} ${MESSAGE}"
+			echo_fail
 			exit_nochange
 		fi
 }
 
-## Validate PH Folders
+## Validate Pi-hole Folders
 function validate_ph_folders {
 	MESSAGE="Locating ${PIHOLE_DIR}"
-	echo -en "${STAT} ${MESSAGE}"
+	echo_stat
 		if [ -d ${PIHOLE_DIR} ]
 		then
-	    	echo -e "\r${GOOD} ${MESSAGE}"
+	    	echo_good
 		else
-			echo -e "\r${FAIL} ${MESSAGE}"
+			echo_fail
 			exit_nochange
 		fi
 }
@@ -343,7 +409,7 @@ function validate_ph_folders {
 ## Validate SSHPASS
 function validate_os_sshpass {
 	MESSAGE="Checking SSH Configuration"
-    echo -e "${INFO} ${MESSAGE}"
+    echo_info
 	
 	if hash sshpass 2>/dev/null
     then
@@ -367,10 +433,10 @@ function validate_os_sshpass {
 		MESSAGE="Using SSH Key-Pair Authentication"
     fi
 	
-	echo -e "${INFO} ${MESSAGE}"
+	echo_info
 	
 	MESSAGE="Testing SSH Connection"
-	echo -en "${STAT} ${MESSAGE}"
+	echo_stat
 		timeout 5 ${SSHPASSWORD} ssh -p ${SSH_PORT} -i '$HOME/${SSH_PKIF}' -o StrictHostKeyChecking=no ${REMOTE_USER}@${REMOTE_HOST} 'exit' >/dev/null 2>&1
 			error_validate
 }
@@ -378,33 +444,72 @@ function validate_os_sshpass {
 ## Error Validation
 function error_validate {
 	if [ "$?" != "0" ]; then
-	    echo -e "\r${FAIL} ${MESSAGE}"
+	    echo_fail
 	    exit 1
 	else
-		echo -e "\r${GOOD} ${MESSAGE}"
+		echo_good
 	fi
 }
 
 ## Validate Sync Required
 function md5_compare {
-	echo -e "${INFO} Comparing ${GRAVITY_FI} Changes"
+	MESSAGE="Comparing ${GRAVITY_FI} Changes"
+	echo_info
 	
 	MESSAGE="Analyzing Remote ${GRAVITY_FI}"
-	echo -en "${STAT} ${MESSAGE}"
+	echo_stat
 	primaryMD5=$(${SSHPASSWORD} ssh -p ${SSH_PORT} -i "$HOME/${SSH_PKIF}" ${REMOTE_USER}@${REMOTE_HOST} "md5sum ${PIHOLE_DIR}/${GRAVITY_FI}")
 		error_validate
 	
 	MESSAGE="Analyzing Local ${GRAVITY_FI}"
-	echo -en "${STAT} ${MESSAGE}"
+	echo_stat
 	secondMD5=$(md5sum ${PIHOLE_DIR}/${GRAVITY_FI})
 		error_validate
 	
 	if [ "$primaryMD5" == "$secondMD5" ]
 	then
-		echo -e "${INFO} No Differences in ${GRAVITY_FI}"
+		MESSAGE="No Differences in ${GRAVITY_FI}"
+		echo_info
 		exit_nochange
 	else
-		echo -e "${INFO} Changes Detected in ${GRAVITY_FI}"
+		MESSAGE="Changes Detected in ${GRAVITY_FI}"
+		echo_info
+	fi
+}
+
+## Validate Intent
+function intent_validate {
+	if [ "$VERIFY_PASS" == "0" ]
+	then
+		PHASER=$((( RANDOM % 4 ) + 1 ))
+		if [ "$PHASER" = "1" ]
+		then
+			INTENT="FIRE PHOTON TORPEDOS"
+		elif [ "$PHASER" = "2" ]
+		then
+			INTENT="FIRE ALL PHASERS"
+		elif [ "$PHASER" = "3" ]
+		then
+			INTENT="EJECT THE WARPCORE"
+		elif [ "$PHASER" = "4" ]
+		then
+			INTENT="ENGAGE TRACTOR BEAM"
+		fi
+		
+		MESSAGE="Enter ${INTENT} at this prompt to confirm"
+		echo_need
+
+		read INPUT_INTENT
+
+		if [ "${INPUT_INTENT}" != "${INTENT}" ]
+		then
+			MESSAGE="${TASKTYPE} Aborted"
+			echo_info
+			exit_nochange
+		fi
+	else
+		MESSAGE="Verification Bypassed"
+		echo_warn
 	fi
 }
 
@@ -412,53 +517,53 @@ function md5_compare {
 ## Generate New Configuration
 function config_generate {
 	MESSAGE="Creating ${CONFIG_FILE} from Template"
-	echo -en "${STAT} ${MESSAGE}"
+	echo_stat
 	cp $HOME/${LOCAL_FOLDR}/${CONFIG_FILE}.example $HOME/${LOCAL_FOLDR}/${CONFIG_FILE}
 	error_validate
 	
-	MESSAGE="Enter IP or DNS of primary Pi-hole server: "
-	echo -en "${NEED} ${MESSAGE}"
+	MESSAGE="Enter IP or DNS of primary Pi-hole server"
+	echo_need
 	read INPUT_REMOTE_HOST
 	
-	MESSAGE="Enter SSH user with SUDO rights on primary Pi-hole server: "
-	echo -en "${NEED} ${MESSAGE}"
+	MESSAGE="Enter SSH user with SUDO rights on primary Pi-hole server"
+	echo_need
 	read INPUT_REMOTE_USER
 	
 	MESSAGE="Saving Host to ${CONFIG_FILE}"
-	echo -en "${STAT} ${MESSAGE}"
+	echo_stat
 	sed -i "/REMOTE_HOST='192.168.1.10'/c\REMOTE_HOST='${INPUT_REMOTE_HOST}'" $HOME/${LOCAL_FOLDR}/${CONFIG_FILE}
 	error_validate
 	
 	MESSAGE="Saving User to ${CONFIG_FILE}"
-	echo -en "${STAT} ${MESSAGE}"
+	echo_stat
 	sed -i "/REMOTE_USER='pi'/c\REMOTE_USER='${INPUT_REMOTE_USER}'" $HOME/${LOCAL_FOLDR}/${CONFIG_FILE}
 	error_validate
 
 	if hash sshpass 2>/dev/null
 	then
 		MESSAGE="SSHPASS Utility Detected"
-		echo -e "${INFO} ${MESSAGE}"
+		echo_info
 		
 		MESSAGE="Do you want to configure password based SSH authentication?"
-		echo -e "${WARN} ${MESSAGE}"
+		echo_warn
 		MESSAGE="Your password will be stored clear-text in the ${CONFIG_FILE}!"
-		echo -e "${WARN} ${MESSAGE}"
+		echo_warn
 
-		MESSAGE="Leave blank to use (preferred) SSH Key-Pair Authentication: "
-		echo -en "${NEED} ${MESSAGE}"
+		MESSAGE="Leave blank to use (preferred) SSH Key-Pair Authentication"
+		echo_need
 		read INPUT_REMOTE_PASS
 				
 		MESSAGE="Saving Password to ${CONFIG_FILE}"
-		echo -en "${STAT} ${MESSAGE}"
+		echo_stat
 		sed -i "/REMOTE_PASS=''/c\REMOTE_PASS='${INPUT_REMOTE_PASS}'" $HOME/${LOCAL_FOLDR}/${CONFIG_FILE}
 		error_validate
 		
 	else
 		MESSAGE="SSHPASS Not Installed"
-		echo -e "${INFO} ${MESSAGE}"
+		echo_info
 		
 		MESSAGE="Defaulting to SSH Key-Pair Authentication"
-		echo -e "${INFO} ${MESSAGE}"
+		echo_info
 	fi
 	
 	if [ -z $INPUT_REMOTE_PASS ]
@@ -466,13 +571,13 @@ function config_generate {
 		if [ -f $HOME/${SSH_PKIF} ]
 		then
 			MESSAGE="Using Existing ~/${SSH_PKIF}"
-			echo -e "${INFO} ${MESSAGE}"
+			echo_info
 		else
 			MESSAGE="Generating ~/${SSH_PKIF}"
-			echo -e "${INFO} ${MESSAGE}"
+			echo_info
 			
 			MESSAGE="Accept All Defaults"
-			echo -e "${WARN} ${MESSAGE}"
+			echo_warn
 			
 			MESSAGE="Complete Key-Pair Creation"
 			echo -e "${NEED} ${MESSAGE}"
@@ -486,7 +591,7 @@ function config_generate {
 	fi
 	
 	MESSAGE="Importing New ${CONFIG_FILE}"
-	echo -en "${STAT} ${MESSAGE}"
+	echo_stat
 	source $HOME/${LOCAL_FOLDR}/${CONFIG_FILE}
 	error_validate
 	
@@ -495,7 +600,7 @@ function config_generate {
 		if [ -f $HOME/${SSH_PKIF} ]
 		then
 			MESSAGE="Registering Key-Pair on ${REMOTE_HOST}"
-			echo -e "${INFO} ${MESSAGE}"
+			echo_info
 			
 			MESSAGE="Enter ${REMOTE_USER}@${REMOTE_HOST} Password Below"
 			echo -e "${NEED} ${MESSAGE}"
@@ -520,37 +625,30 @@ function config_generate {
 function config_delete {
 	source $HOME/${LOCAL_FOLDR}/${CONFIG_FILE}
 	MESSAGE="Configuration File Exists"
-	echo -e "${WARN} ${MESSAGE}"
+	echo_warn
 	
 	echo -e "========================================================"
 	cat $HOME/${LOCAL_FOLDR}/${CONFIG_FILE}
 	echo -e "========================================================"
 	
 	MESSAGE="Are you sure you want to erase this configuration?"
-	echo -e "${WARN} ${MESSAGE}"
-	
-	select yn in "Yes" "No"; do
-		case $yn in
-		Yes )
-			MESSAGE="Erasing Existing Configuration"
-			echo -en "${STAT} ${MESSAGE}"
-			rm -f $HOME/${LOCAL_FOLDR}/${CONFIG_FILE}
-				error_validate
-			
-			config_generate
-		;;
+	echo_warn
 
-		No )
-			exit_nochange
-		;;
-		esac
-	done
+	intent_validate
+
+	MESSAGE="Erasing Existing Configuration"
+	echo_stat
+	rm -f $HOME/${LOCAL_FOLDR}/${CONFIG_FILE}
+		error_validate
+
+	config_generate
 }
 
 # Exit Codes
 ## No Changes Made
 function exit_nochange {
-	echo -e "${INFO} ${PROGRAM} ${TASKTYPE} Aborting"
+	MESSAGE="${PROGRAM} ${TASKTYPE} Aborting"
+	echo_info
 	exit 0
 }
 
@@ -558,7 +656,7 @@ function exit_nochange {
 function exit_withchange {
 	SCRIPT_END=$SECONDS
 	MESSAGE="${PROGRAM} ${TASKTYPE} Completed in $((SCRIPT_END-SCRIPT_START)) seconds"
-	echo -e "${INFO} ${MESSAGE}"
+	echo_info
 	exit 0
 }
 
@@ -572,8 +670,9 @@ function list_gs_arguments {
 	echo -e " ${YELLOW}automate${NC}	Add scheduled task to run sync"
 	echo -e ""
 	echo -e "Replication Options:"
-	echo -e " ${YELLOW}pull${NC}		Sync the ${GRAVITY_FI} database on primary PH to this server"
-	echo -e " ${YELLOW}push${NC}		Force any changes made on this server back to the primary PH"
+	echo -e " ${YELLOW}pull${NC}		Sync the ${GRAVITY_FI} database on primary Pi-hole to this server"
+	echo -e " ${YELLOW}push${NC}		Force any changes made on this server back to the primary Pi-hole"
+	echo -e " ${YELLOW}restore${NC}	Restore ${GRAVITY_FI} on this server from previous copy"
 	echo -e " ${YELLOW}compare${NC}	Just check for differences between primary and secondary"
 	echo -e ""
 	echo -e "Update Options:"
@@ -590,14 +689,15 @@ function list_gs_arguments {
 
 # Output Version
 function show_version {
-	echo -e "${INFO} ${PROGRAM} ${VERSION}"
+	MESSAGE="${PROGRAM} ${VERSION}"
+	echo_info
 }
 
 # Task Stack
 ## Automate Task
 function task_automate {
 	TASKTYPE='AUTOMATE'
-	echo -e "\r${GOOD} ${MESSAGE}"
+	echo_good
 
 	import_gs
 
@@ -605,14 +705,14 @@ function task_automate {
 	if [ ${CRON_CHECK} == 1 ]
 	then
 		MESSAGE="Automation Task Already Exists"
-		echo -e "${INFO} ${MESSAGE}"
+		echo_info
 		MESSAGE="Use 'crontab -e' to manually remove/edit"
-		echo -e "${INFO} ${MESSAGE}"
+		echo_info
 		exit_nochange
 	fi
 
 	MESSAGE="Set Automation Frequency Per Hour"
-	echo -e "${INFO} ${MESSAGE}"
+	echo_info
 
 	MESSAGE="1  = Every 60 Minutes"
 	echo -e "++++++ ${MESSAGE}"
@@ -625,8 +725,8 @@ function task_automate {
 	MESSAGE="12 = Every 05 Minutes"
 	echo -e "++++++ ${MESSAGE}"
 	
-	MESSAGE="Input Automation Frequency: "
-	echo -en "${NEED} ${MESSAGE}"
+	MESSAGE="Input Automation Frequency"
+	echo_need
 	read INPUT_AUTO_FREQ
 
 	if [ $INPUT_AUTO_FREQ == 1 ]
@@ -651,35 +751,72 @@ function task_automate {
 	fi
 
 	MESSAGE="Saving to Crontab"
-		echo -en "${STAT} ${MESSAGE}"
+	echo_stat
 		(crontab -l 2>/dev/null; echo "*/${AUTO_FREQ} * * * * ${BASH_PATH} $HOME/${LOCAL_FOLDR}/${GS_FILENAME} pull > ${LOG_PATH}/${CRONJOB_LOG}") | crontab -
 			error_validate
 
 	exit_withchange
 }	
 
+# Echo Stack
+## Informative
+function echo_info {
+	echo -e "${INFO} ${MESSAGE}"
+}
+
+## Warning
+function echo_warn {
+	echo -e "${WARN} ${MESSAGE}"
+}
+
+## Executing
+function echo_stat {
+	echo -en "${STAT} ${MESSAGE}"
+} 
+
+## Success
+function echo_good {
+	echo -e "\r${GOOD} ${MESSAGE}"
+}
+
+## Failure
+function echo_fail {
+	echo -e "\r${FAIL} ${MESSAGE}"
+}
+
+## Request
+function echo_need {
+	echo -en "${NEED} ${MESSAGE}: "
+}
+
+
+
 # SCRIPT EXECUTION ###########################
 SCRIPT_START=$SECONDS
 	
 	MESSAGE="Evaluating Script Arguments"
-	echo -en "${STAT} ${MESSAGE}"
+	echo_stat
 
 case $# in
 	
 	0)
-		echo -e "\r${FAIL} ${MESSAGE}"
+		echo_fail
 			list_gs_arguments
 	;;
 	
 	1)
    		case $1 in
    	 		pull)
-				echo -e "\r${GOOD} ${MESSAGE}"
+				TASKTYPE='PULL'
+				echo_good
+
+				MESSAGE="${TASKTYPE} Requested"
+				echo_info
 				
 				import_gs
 				
 				MESSAGE="Validating Folder Configuration"
-				echo -e "${INFO} ${MESSAGE}"
+				echo_info
 					validate_gs_folders
 					validate_ph_folders
 					validate_os_sshpass
@@ -689,11 +826,16 @@ case $# in
  			;;
 
 			push)	
-				echo -e "\r${GOOD} ${MESSAGE}"
+				TASKTYPE='PUSH'
+				echo_good
+
+				MESSAGE="${TASKTYPE} Requested"
+				echo_info
 				
 				import_gs
 
-				echo -e "${INFO} Validating Folder Configuration"
+				MESSAGE="Validating Folder Configuration"
+				echo_info
 					validate_gs_folders
 					validate_ph_folders
 					validate_os_sshpass
@@ -701,50 +843,81 @@ case $# in
 				push_gs
 				exit
 			;;
+
+			restore)	
+				TASKTYPE='RESTORE'
+				echo_good
+
+				MESSAGE="${TASKTYPE} Requested"
+				echo_info
+				
+				import_gs
+
+				MESSAGE="Validating Folder Configuration"
+				echo_info
+					validate_gs_folders
+					validate_ph_folders
+					# validate_os_sshpass
+					
+				restore_gs
+				exit
+			;;
 	
 			version)
 				TASKTYPE='VERSION'
-				echo -e "\r${GOOD} ${MESSAGE}"
+				echo_good
+
+				MESSAGE="${TASKTYPE} Requested"
+				echo_info
 
 				show_version
 				exit_nochange
 			;;
 	
 			update)
-				# TASKTYPE='UPDATE'
-				echo -e "\r${GOOD} ${MESSAGE}"
+				TASKTYPE='UPDATE'
+				echo_good
+				
+				MESSAGE="${TASKTYPE} Requested"
+				echo_info
 				
-				echo -e "${INFO} Update Requested"
-					update_gs
+				update_gs
 				exit_nochange
 			;;
 			
 			beta)
-				# TASKTYPE='BETA'
-				echo -e "\r${GOOD} ${MESSAGE}"
+				TASKTYPE='BETA'
+				echo_good
+
+				MESSAGE="${TASKTYPE} Requested"
+				echo_info
 				
-				echo -e "${INFO} Beta Update Requested"
-					beta_gs
+				beta_gs
 				exit_nochange
 			;;
 	
 			logs)
 				TASKTYPE='LOGS'
+				echo_good
 				
-				echo -e "\r${GOOD} ${MESSAGE}"
-				
-				MESSAGE="Logs Requested"
-				echo -e "${INFO} ${MESSAGE}"
-					logs_gs
+				MESSAGE="${TASKTYPE} Requested"
+				echo_info
+
+				logs_gs
 			;;
 			
 			compare)
 				TASKTYPE='COMPARE'
+				echo_good
+
+				MESSAGE="${TASKTYPE} Requested"
+				echo_info
 				
-				echo -e "\r${GOOD} ${MESSAGE}"
-					import_gs
+				import_gs
 				
-				echo -e "${INFO} Validating Folder Configuration"
+				MESSAGE="Validating OS Configuration"
+				echo_info
+
 					validate_gs_folders
 					validate_ph_folders
 					validate_os_sshpass
@@ -754,15 +927,20 @@ case $# in
 			
 			cron)
 				TASKTYPE='CRON'
-				echo -e "\r${GOOD} ${MESSAGE}"
+				echo_good
+
+				MESSAGE="${TASKTYPE} Requested"
+				echo_info
 				
 				show_crontab
 			;;
 			
 			config)
 				TASKTYPE='CONFIGURE'
-				echo -e "\r${GOOD} ${MESSAGE}"
-				echo -e "${INFO} Entering ${TASKTYPE} Mode"
+				echo_good
+
+				MESSAGE="${TASKTYPE} Requested"
+				echo_info
 				
 				if [ -f $HOME/${LOCAL_FOLDR}/${CONFIG_FILE} ]
 				then		
@@ -770,7 +948,7 @@ case $# in
 
 				else
 					MESSAGE="${CONFIG_FILE} Missing"
-					echo -e "${INFO} ${MESSAGE}"
+					echo_info
 					
 					config_generate
 				fi
@@ -785,14 +963,14 @@ case $# in
 			;;	
 
 			*)
-				echo -e "\r${FAIL} ${MESSAGE}"
+				echo_fail
         			list_gs_arguments
 			;;
 		esac
 	;;
 	
 	*)
-		echo -e "\r${FAIL} ${MESSAGE}"
+		echo_fail
 			list_gs_arguments
 	;;
 esac
\ No newline at end of file