I want to provide some tips from my experience implementing a paper. I'm going to cover my tips so far from implementing a dramatically scaled-down version of Llama for training TinyShakespeare. This post is heavily inspired by Karpathy's Makemore series, which I highly recommend.
I'm only going to loosely follow the layout of their paper; while the formatting and order of sections makes sense for publication, we're going to be implementing the paper. I'll also be skipping over some of the more obvious steps, like setting up a virtual environment and installing dependencies.
A preview of what we're going to end up with:
print(generate(llama, MASTER_CONFIG, 500)[0])
ZELBETH:
Sey solmenter! 'tis tonguerered if berryishdd, and What his stabe, you, and, but all I pilJefals, mode with,
Vurint as steolated have loven OlD the queen'd refore
Are been, good plmp:
Proforne, wift'es swleen, was no bunderes'd a a quain beath!
Tybell is my gateer stalk smen'd as be matious dazest brink thou
lord
Enves were cIUll, afe and whwas seath This a is, an tale hoice his his onety Meall-tearn not murkawn, fase bettizen'd her,
To belacquesterer? baxewed wupl usweggs yet tall
AnMy approach for implementing papers is:
- Make all of the helper functions required to test your model quantitatively (data splits, training, plotting the loss).
- Before you even look at the paper, pick a small, simple, and fast model that you've done in the past. Then make a helper function to evaluate the model qualitatively.
- Start by picking apart different components of the paper, and then implementing them one-by-one, training and evaluating as you go.
- Use
.shapereligiously.assertandplt.imshoware also your friends. - Work out the results without matrix multiplication first, and then use the
torchfunctions to make it efficient after. - Have a test to see that your layer is right. For example, the RoPE embeddings have a specific property that you can test for. For the Transformer, you can test that the attention is working by looking at the attention map.
- Test your layers on various batch, sequence, and embedding sizes. Even if it works for one size, it might not work for others, which will cause problems at inference time.
Llama is a transformer-based model for language modeling. Meta AI open-sourced Llama this summer, and it's gained a lot of attention (pun intended). When you're reading the introduction, they clearly indicate their goal: make a model that's cheaper for running inference, rather than optimizing training costs.
At this point, we'll just load our libraries and get started.
import torch
from torch import nn
from torch.nn import functional as F
import numpy as np
from matplotlib import pyplot as plt
import time
import pandas as pdWhile in Llama they train on 1.4T tokens, our dataset TinyShakespeare, the collection of all of Shakespeare's works, is about 1M characters.
lines = open('./input.txt', 'r').read()
vocab = sorted(list(set(lines)))
itos = {i:ch for i, ch in enumerate(vocab)}
stoi = {ch:i for i, ch in enumerate(vocab)}
print(lines[:30])First Citizen:
Before we proce
They use the SentencePiece byte-pair encoding tokenizer, but we're going to just use a simple character-level tokenizer.
# simple tokenization by characters
def encode(s):
return [stoi[ch] for ch in s]
def decode(l):
return ''.join([itos[i] for i in l])
print('vocab size:', len(vocab))
decode(encode("hello"))vocab size: 65
'hello'
Since our dataset is small enough, we don't need to worry about how we store it in memory etc.
First tip: I'm creating a config object that stores some basic model params. It makes our code way more readable and removes constants and magic numbers from the code. I'm not going to use types, as I want to keep things flexible for now and be able to add more parameters later on.
MASTER_CONFIG = {
"vocab_size": len(vocab),
}dataset = torch.tensor(encode(lines), dtype=torch.int8)
dataset.shapetorch.Size([1115394])
Let's create a method to generate our training data and labels for batches. We'll use the same method for validation and test data. Note that I like to test my functions in the same block that I define them, just to make sure they work as expected before moving on.
def get_batches(data, split, batch_size, context_window, config=MASTER_CONFIG):
train = data[:int(.8 * len(data))]
val = data[int(.8 * len(data)): int(.9 * len(data))]
test = data[int(.9 * len(data)):]
batch_data = train
if split == 'val':
batch_data = val
if split == 'test':
batch_data = test
# pick random starting points
ix = torch.randint(0, batch_data.size(0) - context_window - 1, (batch_size,))
x = torch.stack([batch_data[i:i+context_window] for i in ix]).long()
y = torch.stack([batch_data[i+1:i+context_window+1] for i in ix]).long()
return x, y
MASTER_CONFIG.update({
'batch_size': 8,
'context_window': 16
})
xs, ys = get_batches(dataset, 'train', MASTER_CONFIG['batch_size'], MASTER_CONFIG['context_window'])
[(decode(xs[i].tolist()), decode(ys[i].tolist())) for i in range(len(xs))][(', or banishment,', ' or banishment, '),
('do what hands do', 'o what hands do;'),
("? If thou'lt see", " If thou'lt see "),
('and could put br', 'nd could put bre'),
("hath deliver'd.\n", "ath deliver'd.\nI"),
('ing by: whereof ', 'ng by: whereof I'),
(' blows! Despisin', 'blows! Despising'),
('ng of blood, who', 'g of blood, whos')]
What's interesting about implementing papers is that there are two aspects to the model working: compilation (do your tensors all match up from layer to layer), and training (does the loss go down). Figuring out how to ensure that each of your compoenents is working is key to developing your model in a predictable, engineering-minded way.
That's why we're also going to define the method for how we're going to evaluate the model. We want to do this before we even define the model, because we want to be able to use it to evaluate the model as we're training it.
@torch.no_grad() # don't compute gradients for this function
def evaluate_loss(model, config=MASTER_CONFIG):
out = {}
model.eval()
for split in ["train", "val"]:
losses = []
for _ in range(10):
xb, yb = get_batches(dataset, split, config['batch_size'], config['context_window'])
_, loss = model(xb, yb)
losses.append(loss.item())
out[split] = np.mean(losses)
model.train()
return outHere's a basic feed-forward neural network with embeddings. It's the base model we're going to start with, and then swap out parts of it as we go along until we eventually end up with the model as described in Llama.
class SimpleBrokenModel(nn.Module):
def __init__(self, config=MASTER_CONFIG):
super().__init__()
self.config = config
self.embedding = nn.Embedding(config['vocab_size'], config['d_model'])
self.linear = nn.Sequential(
nn.Linear(config['d_model'], config['d_model']),
nn.ReLU(),
nn.Linear(config['d_model'], config['vocab_size']),
)
print("model params:", sum([m.numel() for m in self.parameters()]))
def forward(self, idx, targets=None):
x = self.embedding(idx)
a = self.linear(x)
logits = F.softmax(a, dim=-1)
if targets is not None:
loss = F.cross_entropy(logits.view(-1, self.config['vocab_size']), targets.view(-1))
return logits, loss
else:
return logits
MASTER_CONFIG.update({
'd_model': 128,
})
model = SimpleBrokenModel(MASTER_CONFIG)
xs, ys = get_batches(dataset, 'train', MASTER_CONFIG['batch_size'], MASTER_CONFIG['context_window'])
logits, loss = model(xs, ys)model params: 33217
It's at this point that we have to start worrying about the shape of our tensors and making indices match. Check out this line of our model definition:
loss = F.cross_entropy(logits.view(-1, config['vocab_size']), targets.view(-1))We have to reshape the logits and targets tensors so that their dimensions match when we compare. We do this with the view method. The -1 argument means "infer this dimension from the others". So, in this case, we're saying "reshape logits and targets to have the same number of rows, and however many columns are needed to make that happen". This is a common pattern when you're working with batches of data.
Alright, let's train our SimpleBrokenModel to make sure gradients flow. After we confirm that, we can swap out parts of it to match Llama, train again, and track our progress. It's at this point that I start keeping a log of my training runs, so that I can easily just go back to a previous run in the event that I mess something up.
MASTER_CONFIG.update({
'epochs': 1000,
'log_interval': 10,
'batch_size': 32,
})
model = SimpleBrokenModel(MASTER_CONFIG)
optimizer = torch.optim.Adam(
model.parameters(),
)
def train(model, optimizer, scheduler=None, config=MASTER_CONFIG, print_logs=False):
losses = []
start_time = time.time()
for epoch in range(config['epochs']):
optimizer.zero_grad()
xs, ys = get_batches(dataset, 'train', config['batch_size'], config['context_window'])
logits, loss = model(xs, targets=ys)
loss.backward()
optimizer.step()
if scheduler:
scheduler.step()
if epoch % config['log_interval'] == 0:
batch_time = time.time() - start_time
x = evaluate_loss(model)
losses += [x]
if print_logs:
print(f"Epoch {epoch} | val loss {x['val']:.3f} | Time {batch_time:.3f} | ETA in seconds {batch_time * (config['epochs'] - epoch)/config['log_interval'] :.3f}")
start_time = time.time()
if scheduler:
print("lr: ", scheduler.get_lr())
print("validation loss: ", losses[-1]['val'])
return pd.DataFrame(losses).plot()
train(model, optimizer)model params: 33217
validation loss: 3.942167806625366
<Axes: >
Notice how we get a training curve that goes down, but barely by anything. How do we know it's barely training? We have to use first principles. The cross-entropy loss before training is 4.17, and after 1000 epochs is 3.93. How can we make sense of it intuitively?
Cross-entropy in this context is referring to how likely we are to pick the wrong word. So here,
where
To get an intuition for how the loss relates to the model's performance, think about the model choosing among
Let's try to debug what's going on. Notice that in our model we're using a softmax layer on our logits, which is a function that takes a vector of numbers and squashes them into a probability distribution. But for using the built in F.cross_entropy function, we need to pass in the unnormalized logits directly. So let's remove that from our model and try again.
class SimpleModel(nn.Module):
def __init__(self, config):
super().__init__()
self.config = config
self.embedding = nn.Embedding(config['vocab_size'], config['d_model'])
self.linear = nn.Sequential(
nn.Linear(config['d_model'], config['d_model']),
nn.ReLU(),
nn.Linear(config['d_model'], config['vocab_size']),
)
print("model params:", sum([m.numel() for m in self.parameters()]))
def forward(self, idx, targets=None):
x = self.embedding(idx)
logits = self.linear(x)
if targets is not None:
loss = F.cross_entropy(logits.view(-1, self.config['vocab_size']), targets.view(-1))
return logits, loss
else:
return logits
model = SimpleModel(MASTER_CONFIG)
xs, ys = get_batches(dataset, 'train', MASTER_CONFIG['batch_size'], MASTER_CONFIG['context_window'])
logits, loss = model(xs, ys)
optimizer = torch.optim.Adam(model.parameters())
train(model, optimizer)model params: 33217
validation loss: 2.5058052778244018
<Axes: >
Great, now our loss is
def generate(model, config=MASTER_CONFIG, max_new_tokens=30):
idx = torch.zeros(5, 1).long()
for _ in range(max_new_tokens):
# call the model
logits = model(idx[:, -config['context_window']:])
last_time_step_logits = logits[
:, -1, :
] # all the batches (1), last time step, all the logits
p = F.softmax(last_time_step_logits, dim=-1) # softmax to get probabilities
idx_next = torch.multinomial(
p, num_samples=1
) # sample from the distribution to get the next token
idx = torch.cat([idx, idx_next], dim=-1) # append to the sequence
return [decode(x) for x in idx.tolist()]
generate(model)['\nFind!\nD:\nAr t,\nLis sthte o t l',
'\nAnd ronnot ar\nBE:\nKINRDYOrspr;',
'\nI t athe momyengthend thanswal',
'\nFis t bp he\nLacarn.\nA:\nYOMI wi',
'\nWh ly sck\nB-de pll t\nHERIns ou']
It's not half bad, but also not half good. But now we have a working model that is training to a validation loss. So here we'll iterate on our model to make it closer to Llama.
Llama describes three architectural modifications to the original Transformer:
- RMSNorm for pre-normalization
- Rotary embeddings
- SwiGLU activation function
We're going to add each one, one at a time to our base model, and iterate.
In Vaswani 2017, the original transformer uses BatchNormalization. In Llama, the authors use RMSNorm, which is where you scale the bector by the variance without centering it. In addition, while Vaswani applies normalization to the output of the attention layer (post-normalization), Llama applies it to the inputs before (pre-normalization).
class RMSNorm(nn.Module):
def __init__(self, layer_shape, eps=1e-8, bias=False):
super(RMSNorm, self).__init__()
self.register_parameter("scale", nn.Parameter(torch.ones(layer_shape)))
def forward(self, x):
"""
assumes shape is (batch, seq_len, d_model)
"""
# frob norm is not the same as RMS. RMS = 1/sqrt(N) * frob norm
ff_rms = torch.linalg.norm(x, dim=(1,2)) * x[0].numel() ** -.5
raw = x / ff_rms.unsqueeze(-1).unsqueeze(-1)
return self.scale[:x.shape[1], :].unsqueeze(0) * raw
config = {
'batch_size': 5,
'context_window': 11,
'd_model': 13,
}
batch = torch.randn((config['batch_size'], config['context_window'], config['d_model']))
m = RMSNorm((config['context_window'], config['d_model']))
g = m(batch)
print(g.shape)torch.Size([5, 11, 13])
We want to test to ensure that the RMSNorm is doing what we think it should. We can do this the old-fashioned way: row-wise comparisons. The RMSNorm has the property where the norm of the layer will be the square root of the number of elements in the layer, so we can check that for every layer.
rms = torch.linalg.norm(batch, dim=(1,2)) * (batch[0].numel() ** -.5)
# scaled_batch.var(dim=(1,2))
assert torch.linalg.norm( torch.arange(5).float() ) == (torch.arange(5).float() ** 2 ).sum() ** .5
rms = torch.linalg.norm( torch.arange(5).float() ) * (torch.arange(5).numel() ** -.5)
assert torch.allclose(torch.linalg.norm(torch.arange(5).float() / rms), torch.tensor(5 ** .5))
ff_rms = torch.linalg.norm(batch, dim=(1,2)) * batch.shape[1:].numel() ** -.5
# RMS for sure
ffx = torch.zeros_like(batch)
for i in range(batch.shape[0]):
ffx[i] = batch[i] / ff_rms[i]
assert torch.allclose(torch.linalg.norm(ffx, dim=(1,2)) ** 2, torch.tensor(143).float())
assert torch.allclose(ffx, g)Alright, so that's RMSNorm, and it seems like it's working. Again, let's test it out.
class SimpleModel_RMS(nn.Module):
def __init__(self, config):
super().__init__()
self.config = config
self.embedding = nn.Embedding(config['vocab_size'], config['d_model'])
self.rms = RMSNorm((config['context_window'], config['d_model']))
self.linear = nn.Sequential(
nn.Linear(config['d_model'], config['d_model']),
nn.ReLU(),
nn.Linear(config['d_model'], config['vocab_size']),
)
print("model params:", sum([m.numel() for m in self.parameters()]))
def forward(self, idx, targets=None):
x = self.embedding(idx)
x = self.rms(x) # rms pre-normalization
logits = self.linear(x)
if targets is not None:
loss = F.cross_entropy(logits.view(-1, self.config['vocab_size']), targets.view(-1))
return logits, loss
else:
return logits
model = SimpleModel_RMS(MASTER_CONFIG)
xs, ys = get_batches(dataset, 'train', MASTER_CONFIG['batch_size'], MASTER_CONFIG['context_window'])
logits, loss = model(xs, ys)
optimizer = torch.optim.Adam(model.parameters())
train(model, optimizer)model params: 35265
validation loss: 2.5015316724777223
<Axes: >
So RMSNorm works, and it got our loss down by a small amount.
RoPE is a kind of positional encoding for transformers. In Attention is All You Need, the authors propose two kinds of positional encodings, learned and fixed. In RoPE, the authors propose embedding the position of a token in a sequence by rotating the embedding, with a different rotation at each position.
def get_rotary_matrix(context_window, embedding_dim):
R = torch.zeros((context_window, embedding_dim, embedding_dim), requires_grad=False)
for position in range(context_window):
for i in range(embedding_dim//2):
theta = 10000. ** (-2.*(i - 1) / embedding_dim)
m_theta = position * theta
R[position, 2*i,2*i] = np.cos(m_theta)
R[position, 2*i,2*i+1] = - np.sin(m_theta)
R[position, 2*i+1,2*i] = np.sin(m_theta)
R[position, 2*i+1,2*i+1] = np.cos(m_theta)
return RK = 3
config = {
'batch_size': 10,
'd_model': 32,
'n_heads': 8,
'context_window': K**2,
}
batch = torch.randn(1, config['context_window'], config['d_model'])
R = get_rotary_matrix(config['context_window'], config['d_model'])
fig, ax = plt.subplots(K, K, figsize=(K * 3, K * 4))
for i in range(K):
for j in range(K):
ax[i, j].imshow(R[i * K + j, :, :].detach().numpy())
ax[i, j].set_title(f'rotation at {i * K + j}')
Let's make sure these work. They should exhibit the quality that $$ q_m^T k_n = (R^d_{\Theta, m}W_q x_m)^T (R^d_{\Theta, n} W_k x_n) = x^T W_q R^d_{\Theta, n-m} W_k x_n. $$
config = {
'd_model': 128,
'context_window': 16,
}
R = get_rotary_matrix(config['context_window'], config['d_model'])
x = torch.randn(config['d_model'])
y = torch.randn(config['d_model'])
m = 3
n = 13
x_m = R[m,:,:] @ x
x_n = R[n,:,:] @ y
assert torch.isclose(x_m @ x_n, x @ R[n-m,:,:] @ y)So the RoPE rotations work as expected.
config = {
'batch_size': 10,
'd_model': 512,
'n_heads': 8,
'context_window': 16,
}
class RoPEAttentionHead(nn.Module):
def __init__(self, config):
super().__init__()
self.config = config
self.w_q = nn.Linear(config['d_model'], config['d_model'], bias=False)
self.w_k = nn.Linear(config['d_model'], config['d_model'], bias=False)
self.w_v = nn.Linear(config['d_model'], config['d_model'], bias=False)
self.R = get_rotary_matrix(config['context_window'], config['d_model'])
def get_rotary_matrix(context_window, embedding_dim):
R = torch.zeros((context_window, embedding_dim, embedding_dim), requires_grad=False)
for position in range(context_window):
for i in range(embedding_dim//2):
theta = 10000. ** (-2.*(i - 1) / embedding_dim)
m_theta = position * theta
R[position, 2*i,2*i] = np.cos(m_theta)
R[position, 2*i,2*i+1] = - np.sin(m_theta)
R[position, 2*i+1,2*i] = np.sin(m_theta)
R[position, 2*i+1,2*i+1] = np.cos(m_theta)
return R
def forward(self, x, return_attn_weights=False):
b,m,d = x.shape
q = self.w_q(x)
k = self.w_k(x)
v = self.w_v(x)
q_rotated = (torch.bmm(q.transpose(0,1), self.R[:m])).transpose(0,1)
k_rotated = (torch.bmm(k.transpose(0,1), self.R[:m])).transpose(0,1)
activations = F.scaled_dot_product_attention(
q_rotated,k_rotated,v,dropout_p =.1
)
if return_attn_weights:
attn_weights = torch.bmm(q_rotated, k_rotated.transpose(1,2)) / np.sqrt(d)
attn_weights = F.softmax(attn_weights, dim=-1)
return activations, attn_weights
return activations
layer = RoPEAttentionHead(config)
batch = torch.randn((config['batch_size'], config['context_window'], config['d_model']))
output, attn_weights = layer(batch, return_attn_weights=True)Tip here: know the difference between tensor dimensions at train time vs tensor dimensions at inference time.
Although at train time, you can expect your tensor dimensions to match your model parameters closely, eg batch.shape = (config['batch_size'], config['context_window'], config['d_model']), at inference time, you may have to deal with a single example, eg batch.shape = (1, 1, config['d_model']). For this reason, you need to make sure that when you're indexing in the forward pass, you're indexing using shapes derived from the input, not necessarily the model parameters.
Let's make sure it does what we think it does. For this layer, we're going to want to test three things:
- that it rotates embeddings the way we think it does
- that the attention mask used for causal attention is working properly.
x = torch.randn((config['batch_size'], config['context_window'], config['d_model']))
q = layer.w_q(x)
k = layer.w_k(x)
v = layer.w_v(x)
q_rotated = torch.zeros_like(x)
k_rotated = torch.zeros_like(x)
v_rotated = torch.zeros_like(x)
for position in range(config['context_window']):
q_rotated[:,position,:] = torch.matmul(q[:,position,:], layer.R[position,:,:])
k_rotated[:,position,:] = torch.matmul(k[:,position,:], layer.R[position,:,:])
v_rotated[:,position,:] = torch.matmul(v[:,position,:], layer.R[position,:,:])
q_rotated = (torch.bmm(q.transpose(0,1), layer.R)).transpose(0,1)
k_rotated = (torch.bmm(k.transpose(0,1), layer.R)).transpose(0,1)
v_out = (torch.bmm(v.transpose(0,1), layer.R)).transpose(0,1)
assert torch.allclose(q.transpose(0,1)[0], q[:,0,:])
assert torch.allclose(q.transpose(0,1)[0] @ layer.R[0], q[:,0,:] @ layer.R[0])
assert torch.allclose(q_rotated, q_rotated)config = {
'batch_size': 1,
'd_model': 2,
'n_heads': 2,
'context_window': 3,
}
layer = RoPEAttentionHead(config)
batch = torch.ones((config['batch_size'], config['context_window'], config['d_model']))
output, attn_weights = layer(batch, return_attn_weights=True)
m = 0
x_q = batch[0, m]
q = layer.R[m,:,:] @ layer.w_q(x_q)
assert torch.allclose(layer.w_q(x_q), layer.w_q.weight @ x_q)
assert torch.allclose(q, layer.R[m, :, :] @ layer.w_q.weight @ x_q)
n = 2
x_k = batch[0, n]
k = layer.R[n,:,:] @ layer.w_k(x_k)
assert torch.allclose(layer.w_k(x_k), layer.w_k.weight @ x_k)
assert torch.allclose(k, layer.R[n, :, :] @ layer.w_k.weight @ x_k)
assert q.T @ k == q @ k # transpose is redundant
assert torch.allclose(q @ k, x_k.T @ layer.w_k.weight.T @ layer.R[n, :, :].T @ layer.R[m, :, :] @ layer.w_q.weight @ x_q)
assert torch.allclose(q @ k, x_k.T @ layer.w_k.weight.T @ layer.R[n-m, :, :].T @ layer.w_q.weight @ x_q)/var/folders/w4/2j887mvs097bkhhjpgfzjlyr0000gn/T/ipykernel_52564/2062321511.py:26: UserWarning: The use of `x.T` on tensors of dimension other than 2 to reverse their shape is deprecated and it will throw an error in a future release. Consider `x.mT` to transpose batches of matrices or `x.permute(*torch.arange(x.ndim - 1, -1, -1))` to reverse the dimensions of a tensor. (Triggered internally at /Users/runner/work/pytorch/pytorch/pytorch/aten/src/ATen/native/TensorShape.cpp:3575.)
assert q.T @ k == q @ k # transpose is redundant
Let's setup a multi-headed attention layer for this singular attention head and see what happens when we train.
# definitely there's an optimization we could make where we cache the rotation matrices, but skip.
class RoPEMultiheadAttention(nn.Module):
def __init__(self, config):
super().__init__()
self.config = config
self.heads = nn.ModuleList([
RoPEAttentionHead(config) for _ in range(config['n_heads'])
])
self.linear = nn.Linear(config['n_heads'] * config['d_model'], config['d_model'])
self.dropout = nn.Dropout(.1)
def forward(self, x):
heads = [h(x) for h in self.heads]
x = torch.cat(heads, dim=-1)
x = self.linear(x)
x = self.dropout(x)
return x
MASTER_CONFIG.update({
'n_heads': 8,
})
layer = RoPEMultiheadAttention(MASTER_CONFIG)
batch = torch.ones((MASTER_CONFIG['batch_size'], MASTER_CONFIG['context_window'], MASTER_CONFIG['d_model']))
output = layer(batch)
output.shapetorch.Size([32, 16, 128])
class RopeModel(nn.Module):
def __init__(self, config):
super().__init__()
self.config = config
self.embedding = nn.Embedding(config['vocab_size'], config['d_model'])
self.rms = RMSNorm((config['context_window'], config['d_model']))
self.rope_attention = RoPEMultiheadAttention(config)
self.linear = nn.Sequential(
nn.Linear(config['d_model'], config['d_model']),
nn.ReLU(),
)
self.last_linear = nn.Linear(config['d_model'], config['vocab_size'])
print("model params:", sum([m.numel() for m in self.parameters()]))
def forward(self, idx, targets=None):
x = self.embedding(idx)
# one block of attention
x = self.rms(x) # rms pre-normalization
x = x + self.rope_attention(x)
x = self.rms(x) # rms pre-normalization
x = x + self.linear(x)
logits = self.last_linear(x)
if targets is not None:
loss = F.cross_entropy(logits.view(-1, self.config['vocab_size']), targets.view(-1))
return logits, loss
else:
return logits
model = RopeModel(MASTER_CONFIG)
xs, ys = get_batches(dataset, 'train', MASTER_CONFIG['batch_size'], MASTER_CONFIG['context_window'])
logits, loss = model(xs, ys)
optimizer = torch.optim.Adam(model.parameters())
train(model, optimizer)model params: 559681
validation loss: 0.1623048834502697
<Axes: >
Wow, would you look at that, our validation loss is down to .16. That is so low...it's almost too low. Consider the check we used from above:
generate(model, config=MASTER_CONFIG)['\n\n\n\n\n\n\n\nI\n\nOOOOOOOOOFOOtOOOOOOO',
'\nIIIIII IIIIIIIIIIIIIIIIIIIIIII',
'\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n',
'\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\naaame',
'\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n']
So it looks terrible. What is happening here? Let's start debugging this by looking at the attention.
MASTER_CONFIG.update({
'n_heads': 8,
})
layer = RoPEAttentionHead(MASTER_CONFIG)
batch = torch.ones((MASTER_CONFIG['batch_size'], MASTER_CONFIG['context_window'], MASTER_CONFIG['d_model']))
output, attn_weights = layer(batch, return_attn_weights=True)
plt.imshow(attn_weights[0].detach().numpy(), interpolation='nearest')
plt.colorbar()<matplotlib.colorbar.Colorbar at 0x2872d0c10>
So here we see that all the attention is lit up, meaning that characters in any position are attending to characters in any other position. What's bad about this? We are trying to predict the next token solely on the tokens that came before it, but here we're seeing that the model is attending to tokens that come after it. In other words, the model is cheating, or leaking information from the future. This is a problem, and it's why we need to use a causal mask.
config = {
'batch_size': 10,
'd_model': 512,
'n_heads': 8,
'context_window': 16,
}
class RoPEMaskedAttentionHead(nn.Module):
def __init__(self, config):
super().__init__()
self.config = config
self.w_q = nn.Linear(config['d_model'], config['d_model'], bias=False)
self.w_k = nn.Linear(config['d_model'], config['d_model'], bias=False)
self.w_v = nn.Linear(config['d_model'], config['d_model'], bias=False)
self.R = get_rotary_matrix(config['context_window'], config['d_model'])
def get_rotary_matrix(context_window, embedding_dim):
R = torch.zeros((context_window, embedding_dim, embedding_dim), requires_grad=False)
for position in range(context_window):
for i in range(embedding_dim//2):
theta = 10000. ** (-2.*(i - 1) / embedding_dim)
m_theta = position * theta
R[position, 2*i,2*i] = np.cos(m_theta)
R[position, 2*i,2*i+1] = - np.sin(m_theta)
R[position, 2*i+1,2*i] = np.sin(m_theta)
R[position, 2*i+1,2*i+1] = np.cos(m_theta)
return R
def forward(self, x, return_attn_weights=False):
b,m,d = x.shape
q = self.w_q(x)
k = self.w_k(x)
v = self.w_v(x)
q_rotated = (torch.bmm(q.transpose(0,1), self.R[:m])).transpose(0,1)
k_rotated = (torch.bmm(k.transpose(0,1), self.R[:m])).transpose(0,1)
activations = F.scaled_dot_product_attention(
q_rotated,k_rotated,v,dropout_p =.1, is_causal=True
)
if return_attn_weights:
attn_mask = torch.tril(torch.ones((m,m)), diagonal=0)
attn_weights = torch.bmm(q_rotated, k_rotated.transpose(1,2)) / np.sqrt(d) + attn_mask
attn_weights = F.softmax(attn_weights, dim=-1)
return activations, attn_weights
return activations
layer = RoPEMaskedAttentionHead(config)
batch = torch.randn((config['batch_size'], config['context_window'], config['d_model']))
output, attn_weights = layer(batch, return_attn_weights=True)layer = RoPEMaskedAttentionHead(MASTER_CONFIG)
batch = torch.ones((MASTER_CONFIG['batch_size'], MASTER_CONFIG['context_window'], MASTER_CONFIG['d_model']))
output, attn_weights = layer(batch, return_attn_weights=True)
plt.imshow(attn_weights[0].detach().numpy())
plt.colorbar()<matplotlib.colorbar.Colorbar at 0x2873f30d0>
Now, we can see that the upper triangular of our attention activations (the part that corresponds to the future) is nearly zeroed out. Let's see what happens when we train.
# definitely there's an optimization we could make where we cache the rotation matrices, but skip.
class RoPEMaskedMultiheadAttention(nn.Module):
def __init__(self, config):
super().__init__()
self.config = config
self.heads = nn.ModuleList([
RoPEMaskedAttentionHead(config) for _ in range(config['n_heads'])
])
self.linear = nn.Linear(config['n_heads'] * config['d_model'], config['d_model'])
self.dropout = nn.Dropout(.1)
def forward(self, x):
heads = [h(x) for h in self.heads]
x = torch.cat(heads, dim=-1)
x = self.linear(x)
x = self.dropout(x)
return x
MASTER_CONFIG.update({
'n_heads': 8,
})
layer = RoPEMultiheadAttention(MASTER_CONFIG)
batch = torch.ones((MASTER_CONFIG['batch_size'], MASTER_CONFIG['context_window'], MASTER_CONFIG['d_model']))
output = layer(batch)
output.shapetorch.Size([32, 16, 128])
class RopeModel(nn.Module):
def __init__(self, config):
super().__init__()
self.config = config
self.embedding = nn.Embedding(config['vocab_size'], config['d_model'])
self.rms = RMSNorm((config['context_window'], config['d_model']))
self.rope_attention = RoPEMaskedMultiheadAttention(config)
self.linear = nn.Sequential(
nn.Linear(config['d_model'], config['d_model']),
nn.ReLU(),
)
self.last_linear = nn.Linear(config['d_model'], config['vocab_size'])
print("model params:", sum([m.numel() for m in self.parameters()]))
def forward(self, idx, targets=None):
x = self.embedding(idx)
# one block of attention
x = self.rms(x) # rms pre-normalization
x = x + self.rope_attention(x)
x = self.rms(x) # rms pre-normalization
x = x + self.linear(x)
logits = self.last_linear(x)
if targets is not None:
loss = F.cross_entropy(logits.view(-1, self.config['vocab_size']), targets.view(-1))
return logits, loss
else:
return logits
model = RopeModel(MASTER_CONFIG)
xs, ys = get_batches(dataset, 'train', MASTER_CONFIG['batch_size'], MASTER_CONFIG['context_window'])
logits, loss = model(xs, ys)
optimizer = torch.optim.Adam(model.parameters())
train(model, optimizer)model params: 559681
validation loss: 2.0815173864364622
<Axes: >
Much better, our loss is now not merely dropping to near-zero. It looks like we can drive our loss down even lower. Let's do that by updating master config.
MASTER_CONFIG.update({
"epochs": 5000,
"log_interval": 10,
})
train(model, optimizer)validation loss: 1.8985356330871581
<Axes: >
As it says in the paper, "We replace the ReLU non-linearity by the SwiGLU activation function...we use a dimension of
class SwiGLU(nn.Module):
"""
Swish-Gated Linear Unit
https://arxiv.org/pdf/2002.05202v1.pdf
"""
def __init__(self, size):
super().__init__()
self.config = config
self.linear_gate = nn.Linear(size, size)
self.linear = nn.Linear(size, size)
self.beta = torch.randn(1, requires_grad=True)
self.beta = nn.Parameter(torch.ones(1))
self.register_parameter("beta", self.beta)
def forward(self, x):
swish_gate = self.linear_gate(x) * torch.sigmoid(self.beta * self.linear_gate(x))
out = swish_gate * self.linear(x)
return outclass RopeModel(nn.Module):
def __init__(self, config):
super().__init__()
self.config = config
self.embedding = nn.Embedding(config['vocab_size'], config['d_model'])
self.rms = RMSNorm((config['context_window'], config['d_model']))
self.rope_attention = RoPEMaskedMultiheadAttention(config)
self.linear = nn.Sequential(
nn.Linear(config['d_model'], config['d_model']),
SwiGLU(config['d_model']),
)
self.last_linear = nn.Linear(config['d_model'], config['vocab_size'])
print("model params:", sum([m.numel() for m in self.parameters()]))
def forward(self, idx, targets=None):
x = self.embedding(idx)
# one block of attention
x = self.rms(x) # rms pre-normalization
x = x + self.rope_attention(x)
x = self.rms(x) # rms pre-normalization
x = x + self.linear(x)
logits = self.last_linear(x)
if targets is not None:
loss = F.cross_entropy(logits.view(-1, self.config['vocab_size']), targets.view(-1))
return logits, loss
else:
return logits
model = RopeModel(MASTER_CONFIG)
xs, ys = get_batches(dataset, 'train', MASTER_CONFIG['batch_size'], MASTER_CONFIG['context_window'])
logits, loss = model(xs, ys)
optimizer = torch.optim.Adam(model.parameters())
train(model, optimizer)model params: 592706
validation loss: 1.8963455319404603
<Axes: >
Now, let's add multiple layers of RopeAttention by creating blocks.
# add RMSNorm and residual conncection
class LlamaBlock(nn.Module):
def __init__(self, config):
super().__init__()
self.config = config
self.rms = RMSNorm((config['context_window'], config['d_model']))
self.attention = RoPEMaskedMultiheadAttention(config)
self.feedforward = nn.Sequential(
nn.Linear(config['d_model'], config['d_model']),
SwiGLU(config['d_model']),
)
def forward(self, x):
x = self.rms(x) # rms pre-normalization
x = x + self.attention(x)
x = self.rms(x) # rms pre-normalization
x = x + self.feedforward(x)
return xblock = LlamaBlock(MASTER_CONFIG)
block(torch.randn(MASTER_CONFIG['batch_size'], MASTER_CONFIG['context_window'], MASTER_CONFIG['d_model']));from collections import OrderedDict
MASTER_CONFIG.update({
'n_layers': 4,
})
class Llama(nn.Module):
def __init__(self, config):
super().__init__()
self.config = config
self.embeddings = nn.Embedding(config['vocab_size'], config['d_model'])
self.llama_blocks = nn.Sequential(
OrderedDict([(f"llama_{i}", LlamaBlock(config)) for i in range(config['n_layers'])])
)
self.ffn = nn.Sequential(
nn.Linear(config['d_model'], config['d_model']),
SwiGLU(config['d_model']),
nn.Linear(config['d_model'], config['vocab_size']),
)
print("model params:", sum([m.numel() for m in self.parameters()]))
def forward(self, idx, targets=None):
x = self.embeddings(idx)
x = self.llama_blocks(x)
logits = self.ffn(x)
if targets is None:
return logits
else:
loss = F.cross_entropy(logits.view(-1, self.config['vocab_size']), targets.view(-1))
return logits, loss
llama = Llama(MASTER_CONFIG)
optimizer = torch.optim.Adam(llama.parameters())
train(llama, optimizer, config=MASTER_CONFIG)model params: 2370246
validation loss: 1.5532499313354493
<Axes: >
It looks like we can drive the loss down even more, and although we're overfitting a little, I think we can still do better. Let's train longer.
MASTER_CONFIG.update({
'epochs': 10000,
})
train(llama, optimizer, scheduler=None, config=MASTER_CONFIG)validation loss: 1.1478946447372436
<Axes: >
It seems we can go even lower, still without serious overfitting. Either there is a leak, or it's actually doing well. The loss here is 1.08, which is equivalent to choosing between 2.9 tokens randomly.
train(llama, optimizer, config=MASTER_CONFIG)validation loss: 0.9996801257133484
<Axes: >
print(generate(llama, MASTER_CONFIG, 500)[0])ZELBETH:
Sey solmenter! 'tis tonguerered if berryishdd, and What his stabe, you, and, but all I pilJefals, mode with,
Vurint as steolated have loven OlD the queen'd refore
Are been, good plmp:
Proforne, wift'es swleen, was no bunderes'd a a quain beath!
Tybell is my gateer stalk smen'd as be matious dazest brink thou
lord
Enves were cIUll, afe and whwas seath This a is, an tale hoice his his onety Meall-tearn not murkawn, fase bettizen'd her,
To belacquesterer? baxewed wupl usweggs yet tall
An
At this point, we've hit the bottom with our training. Let's test on the test set.
xs, ys = get_batches(dataset, 'test', MASTER_CONFIG['batch_size'], MASTER_CONFIG['context_window'])
logits, loss = llama(xs, ys)
print(loss)tensor(1.2358, grad_fn=<NllLossBackward0>)
Let's inspect the gradients, we want to see how they're flowing. If there are too many gradients where the value is close to 0, that's a problem.
# print the percentage that are near 0
def show_grads(model, tol=1e-2):
return sorted([(name, 100.0 * float(torch.sum(torch.abs(param) <= tol)) / float(param.nelement())) for name, param in model.named_parameters() if param.requires_grad], key=lambda t: t[1], reverse=True)
show_grads(llama)Here, for all of our parameter gradients, the vast majority are non-zero, which is great. If we start to see this number peak higher, then our gradients would not be flowing.
In the original Llama paper, the authors use Cosine Annealing learning schedule. We didn't do that here, because I experimented and saw that it was worse.
MASTER_CONFIG.update({
"epochs": 1000
})
llama_with_cosine = Llama(MASTER_CONFIG)
llama_optimizer = torch.optim.Adam(
llama.parameters(),
betas=(.9, .95),
weight_decay=.1,
eps=1e-9,
lr=1e-3
)
scheduler = torch.optim.lr_scheduler.CosineAnnealingLR(llama_optimizer, 300, eta_min=1e-5)
train(llama_with_cosine, llama_optimizer, scheduler=scheduler)show_grads(llama_with_cosine, 1e-5)Even at an extremely low tolerance, the attention biases are not getting any signal. I'm not sure why the learning schedule from the paper doesn't work, but the lesson here is simple: start simple.