-
Notifications
You must be signed in to change notification settings - Fork 729
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
[ Question ] ESP32 ### unhandled: #782
Comments
Hey @RazorHex, I have a similar issue. Are you willing to paste your code so I can try and see if I get the same output? I also can't connect to the GSM Module and send AT commands. I am using an ESP32 (ESP32 S3 DevKit-1) and SIMCom7600G. |
Hey @live-alchemy. #include "4G_handler.h"
const char *broker = "broker.hivemq.com"; // MQTT Credential
HardwareSerial SerialAT(2);
#ifdef DUMP_AT_COMMANDS
StreamDebugger debugger(SerialAT, SerialMon);
TinyGsm _modem(debugger);
#else
TinyGsm _modem(SerialAT);
#endif
// TinyGsm _modem(SerialAT);
TinyGsmClient client(_modem);
SIM7600G::SIM7600G() {}
boolean SIM7600G::_reset()
{
return _modem.factoryDefault();
}
boolean SIM7600G::init(boolean reset)
{
SerialAT.begin(defaultBaud, SERIAL_8N1, RX_GSM, TX_GSM, false);
if (_modem.isGprsConnected())
{
if (_modem.enableGPS())
{
SerialMon.println("GPS Enabled.");
}
return _modem.isGprsConnected();
}
delay(6000);
SerialMon.print("Setting Baud Rate to ");
SerialMon.println(defaultBaud);
_modem.setBaud(defaultBaud);
// TinyGsmAutoBaud(SerialAT, GSM_AUTOBAUD_MIN, GSM_AUTOBAUD_MAX); // use for testing
if (reset)
{
SerialMon.println("Reseting the module...");
_reset();
}
delay(6000);
SerialMon.println("SerialAT Ready!");
SerialMon.println("Initializing SIM7600G...");
_modem.init();
delay(3000);
SerialMon.print("Sim Card Status : ");
SerialMon.println(_modem.getSimStatus());
delay(3000);
String modemInfo = _modem.getModemInfo();
SerialMon.print("Modem Info : ");
SerialMon.println(modemInfo);
delay(3000);
SerialMon.println("Connecting to GPRS...");
if (!_modem.waitForNetwork(10000L))
{ // You may need lengthen this in poor service areas
SerialMon.println(F(" [fail]"));
SerialMon.println(F("************************"));
SerialMon.println(F(" Is your sim card locked?"));
SerialMon.println(F(" Do you have a good signal?"));
SerialMon.println(F(" Is antenna attached?"));
SerialMon.println(F(" Does the SIM card work with your phone?"));
SerialMon.println(F("************************"));
delay(10000);
}
_modem.gprsConnect(apn);
if (_modem.waitResponse(10000L) != 1)
{
Serial.println("GPS FAIL");
// Serial.println("SGPIO=0,4,1,1 false ");
}
if (_modem.enableGPS())
{
SerialMon.println("[ + ] GPS Enabled.");
}
else
{
SerialMon.println("[ - ] GPS Disabled.");
}
// SerialMon.println("Setting mode for LTE");
// if (_modem.setNetworkMode(38) > 0)
// {
// if (_modem.gprsConnect(apn) > 0)
// {
// SerialMon.println("Connected!");
// }
// break;
// }
// else
// {
// SerialMon.println("Failed!");
// }
// bool conn = _modem.isGprsConnected();
return _modem.isGprsConnected();
// SerialMon.println((conn) ? "Connected" : "Failed");
}
String SIM7600G::getGPS()
{
if (SerialAT.available() == 0)
{
SerialAT.begin(defaultBaud, SERIAL_8N1, RX_GSM, TX_GSM, false);
}
if (_modem.enableGPS() && !gps_enabled)
{
gps_enabled = true;
SerialMon.println("GPS Enabled.");
}
float lat, lon;
_modem.getGPS(&lat, &lon);
SerialMon.println(lat);
SerialMon.println(lon);
return _modem.getGPSraw();
} This is the defined variable #define TINY_GSM_MODEM_SIM7600
#define SerialMon Serial
#define TINY_GSM_DEBUG SerialMon
#define TINY_GSM_USE_GPRS true
#define TINY_GSM_USE_WIFI false
#define GSM_AUTOBAUD_MIN 9600
#define GSM_AUTOBAUD_MAX 115200
#define DUMP_AT_COMMANDS
#define TINY_GSM_TEST_GPRS true
#define TINY_GSM_TEST_TCP true
#define TINY_GSM_TEST_GPS true
#define RX_GSM 16
#define TX_GSM 17
#define defaultBaud 115200
#include <TinyGSM.h>
#include <TinyGsmClient.h>
#include <HardwareSerial.h>
#include <StreamDebugger.h> |
Hm ok, I'm afraid I'm not totally clear which problem you're facing or what you want to accomplish. Apologies. |
Yeah same here, i think its related to the IMEI |
I promptly reflashed global firmware to make SIM900A SIM900. |
[x] I have read the Troubleshooting section of the ReadMe
What type of issues is this?
[ ] Request to support a new module
[ ] Bug or problem compiling the library
[ ] Bug or issue with library functionality (ie, sending data over TCP/IP)
[x] Question or request for help
What are you working with?
Hello, i'm trying to connect SIM7600G with ESP32 but i don't understand the output and how to set up the debug mode.
I have tried the solution provided in this comment but i still not understand the output and where to find the documentation about the expected output.
Modem: SIM7600G
Main processor board: DOIT ESP32 DevKit v1
TinyGSM version: 0.11.7
Code:
Scenario, steps to reproduce
Expected result
Actual result
Debug and AT command log
The text was updated successfully, but these errors were encountered: