Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

saddle keycaps trigger thin wall warning on jlc3dp #7

Open
caut110 opened this issue Jan 16, 2025 · 1 comment
Open

saddle keycaps trigger thin wall warning on jlc3dp #7

caut110 opened this issue Jan 16, 2025 · 1 comment

Comments

@caut110
Copy link

caut110 commented Jan 16, 2025

Assembly4PairDoubleslantSaddleLowSideAndHoming v5.stl and Assembly10Saddle v3.stl trigger a thin wall warning on jlc3dp.

Content of email received from jlc3dp after placing my order:

As shown below, the wall thickness of those indicate red area are too thin, which has a high risk of loss, deformation, crack, or damage during the printing process.

Could you please confirm if the risks are acceptable for you?

If not, could you please kindly increase it to be at least 1.0mm to proceed? 2.0mm will be better. Then we will activate the "replace file" button for you.

saddle-warning

I confirmed the order as it is in hope this can be ignored and results will be fine.

please close if irrelevant.
@vvhg1
Copy link
Owner

vvhg1 commented Jan 17, 2025

The warning is expected, I had no issues so far. Please report back if you encounter any problems.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@vvhg1 @caut110