forked from McMCCRU/SNANDer
-
Notifications
You must be signed in to change notification settings - Fork 0
/
readme.txt
133 lines (108 loc) · 4.82 KB
/
readme.txt
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
SNANDer - Serial Nor/nAND/Eeprom programmeR v.1.7.4 by McMCC <mcmcc_at_mail.ru>
Usage:
-h display this message
-d disable internal ECC(use read and write page size + OOB size)
-I ECC ignore errors(for read test only)
-L print list support chips
-i read the chip ID info
-E select I2C EEPROM {24c01|24c02|24c04|24c08|24c16|24c32|24c64|24c128|24c256|24c512|24c1024}
select Microwire EEPROM {93c06|93c16|93c46|93c56|93c66|93c76|93c86|93c96} (need SPI-to-MW adapter)
-8 set organization 8-bit for Microwire EEPROM(default 16-bit) and set jumper on SPI-to-MW adapter
-f <addr len> set manual address size in bits for Microwire EEPROM(default auto)
-e erase chip(full or use with -a [-l])
-l <bytes> manually set length
-a <address> manually set address
-w <filename> write chip with data from filename
-r <filename> read chip and save data to filename
-v verify after write on chip
Examples:
1. Get info Flash.
igor@mcmcc-GL553VE:~/Soft/SNANDer-bin/Linux$ ./SNANDer -i
SNANDer - Serial Nor/nAND/Eeprom programmeR v.1.7.4 by McMCC <mcmcc_at_mail.ru>
Found programmer device: WinChipHead (WCH) - CH341A
Device revision is 3.0.4
spi_nand_probe: mfr_id = 0xc2, dev_id = 0x22
Get Status Register 1: 0x38
Get Status Register 2: 0x10
Using Flash ECC.
Detected SPI NAND Flash: MXIC MX35LF2G, Flash Size: 256 MB
or
SNANDer - Serial Nor/nAND/Eeprom programmeR v.1.7.4 by McMCC <mcmcc_at_mail.ru>
Found programmer device: Winchiphead (WCH) - CH341A
Device revision is 3.0.4
spi_nand_probe: mfr_id = 0xef, dev_id = 0xaa
Get Status Register 1: 0x81
Get Status Register 2: 0x18
Using Flash ECC.
Detected SPI NAND Flash: WINBOND W25N01G, Flash Size: 128 MB
2. Full erase flash with disable internal ECC check. Without OOB, page size 2112 bytes.
igor@mcmcc-GL553VE:~/Soft/SNANDer-bin/Linux$ ./SNANDer -d -e
SNANDer - Serial Nor/nAND/Eeprom programmeR v.1.7.4 by McMCC <mcmcc_at_mail.ru>
Found programmer device: WinChipHead (WCH) - CH341A
Device revision is 3.0.4
spi_nand_probe: mfr_id = 0xc2, dev_id = 0x22
Get Status Register 1: 0x00
Get Status Register 2: 0x11
Disable Flash ECC.
Detected SPI NAND Flash: MXIC MX35LF2G, Flash Size: 256 MB
ERASE:
Set full erase chip!
Erase addr = 0x0000000000000000, len = 0x0000000010800000
Erase 100% [276824064] of [276824064] bytes
Elapsed time: 3 seconds
Status: OK
igor@mcmcc-GL553VE:~/Soft/SNANDer-bin/Linux$
3. Write and verify flash with disable internal ECC check. Without OOB, page size 2112 bytes.
igor@mcmcc-GL553VE:~/Soft/SNANDer-bin/Linux$ ./SNANDer -d -v -w ecc_2Gb_2K_64_flashimage_rfb1_ac2600.bin
SNANDer - Serial Nor/nAND/Eeprom programmeR v.1.7.4 by McMCC <mcmcc_at_mail.ru>
Found programmer device: WinChipHead (WCH) - CH341A
Device revision is 3.0.4
spi_nand_probe: mfr_id = 0xc2, dev_id = 0x22
Get Status Register 1: 0x00
Get Status Register 2: 0x11
Disable Flash ECC.
Detected SPI NAND Flash: MXIC MX35LF2G, Flash Size: 256 MB
WRITE:
Write addr = 0x0000000000000000, len = 0x000000000E5A9D6F
Written 100% [240819567] of [240819567] bytes
Elapsed time: 4184 seconds
Status: OK
VERIFY:
Read addr = 0x0000000000000000, len = 0x000000000E5A9D6F
Read 100% [240819567] of [240819567] bytes
Elapsed time: 2047 seconds
Status: OK
4. Read Microwire EEPROM Atmel 93C46 and save file.
igor@igor-GL553VE:~/Soft/SNANDer-bin/Linux$ ./SNANDer -E 93c46 -r test.bin
SNANDer - Serial Nor/nAND/Eeprom programmeR v.1.7.4 by McMCC <mcmcc_at_mail.ru>
Found programmer device: WinChipHead (WCH) - CH341A
Device revision is 3.0.4
Microwire EEPROM chip: 93c46, Size: 64 bytes, Org: 16 bits, fix addr len: Auto
READ:
Read addr = 0x0000000000000000, len = 0x0000000000000080
Read_EEPROM_3wire: Set address len 6 bits
Read 100% [64] of [64] bytes
Read [128] bytes from [93c46] EEPROM address 0x00000000
Elapsed time: 0 seconds
Status: OK
5. Write and verify Microwire EEPROM Atmel 93C46 from file.
igor@igor-GL553VE:~/Soft/SNANDer-bin/Linux$ ./SNANDer -E 93c46 -w test.bin -v
SNANDer - Serial Nor/nAND/Eeprom programmeR v.1.7.4 by McMCC <mcmcc_at_mail.ru>
Found programmer device: WinChipHead (WCH) - CH341A
Device revision is 3.0.4
Microwire EEPROM chip: 93c46, Size: 64 bytes, Org: 16 bits, fix addr len: Auto
WRITE:
Write addr = 0x0000000000000000, len = 0x0000000000000080
Erase_EEPROM_3wire: Set address len 6 bits
Write_EEPROM_3wire: Set address len 6 bits
Written 100% [64] of [64] bytes
Wrote [128] bytes to [93c46] EEPROM address 0x00000000
Elapsed time: 1 seconds
Status: OK
VERIFY:
Read addr = 0x0000000000000000, len = 0x0000000000000080
Read_EEPROM_3wire: Set address len 6 bits
Read 100% [64] of [64] bytes
Read [128] bytes from [93c46] EEPROM address 0x00000000
Elapsed time: 1 seconds
Status: OK