These sections will guide you through a series of steps from configuring development environment to running FreeRTOS examples using the WIZnet's ethernet products.
To test the FreeRTOS examples, the development environment must be configured to use Raspberry Pi Pico, W5100S-EVB-Pico or W5500-EVB-Pico.
The FreeRTOS examples were tested by configuring the development environment for Windows. Please refer to the '9.2. Building on MS Windows' section of 'Getting started with Raspberry Pi Pico' document below and configure accordingly.
Visual Studio Code was used during development and testing of FreeRTOS examples, the guide document in each directory was prepared also base on development with Visual Studio Code. Please refer to corresponding document.
The FreeRTOS examples use Raspberry Pi Pico and WIZnet Ethernet HAT - ethernet I/O module built on WIZnet's W5100S ethernet chip, W5100S-EVB-Pico - ethernet I/O module built on RP2040 and WIZnet's W5100S ethernet chip or W5500-EVB-Pico - ethernet I/O module built on RP2040 and WIZnet's W5500 ethernet chip.
