Connection lost during request #173
Replies: 6 comments 2 replies
-
You do not need to disable the connection to the Huawei cloud servers for this integration to work. Make sure that the integration is the only thing connecting to the inverter. This error only occurs when the modbus connection is stolen from the integration. I have nothing else to add/suggest tbh. |
Beta Was this translation helpful? Give feedback.
-
@wlcrs thank you, this is a new device / inverter in existing network, except android app for configuration nothing was ever connected. Does somebody have more experience with the mentioned inverter and what else could be? maybe some additional setting? newer firmware issue/limitation, or something else. |
Beta Was this translation helpful? Give feedback.
-
have you already tried on port 502 ? |
Beta Was this translation helpful? Give feedback.
-
this port was never opened on my device, and is still not. I tried for days, and seems something inside device is interrupting communication so i can not get modbus tcp to get working (still the same / original error as described above). Maybe something from Huawei, but i do not know what. |
Beta Was this translation helpful? Give feedback.
-
For me the exact opposite...port 502 open and 6607 closed. |
Beta Was this translation helpful? Give feedback.
-
It seems that Huawei did some changes:
I confirm that I have purchased additional dongle, and dongle is answering on 502 TCP port and not 6607, and I confirm MODBUS is working and this bug/discussion is over. It is very strange to offer firmware update and limit functionalities. Those who have M models, already got the dongle with inverter and modbus should work. But those with monophase / L models, need to purchase additional dongle and cannot work with integrated WiFi (with modbus enabled, and over 6607 port which is open), heh... |
Beta Was this translation helpful? Give feedback.
-
Hello,
I have new Huawei SUN2000-6KTL-1 , I have used Huawei FusionSolar android app to setup it.
The integrated WiFi is connected to my house WiFi. Firmware is updated (software version V200R001C00SPC124 and MBUS firmware is to V100R001C00SPC320). Modbus tcp is enabled unrestricted. Installater password is set.
I can open TCP connection from computer to port 6607. Slave ID is 1. Additional Huawei power sensor is connected and visible in the app.
After HACS and wlcrs/huawei_solar installation. I am unable to connect - Reading from the inverter failed.
In logs I see:
What other devices / connections is possible to have / how to disable them?
Should I disable Huawei cloud connection inside FusionSolar app (“Management System” connection to EU / global servers)?
I can use the mobile app and device commissioning as installer with password on the same/home network. If this “device commissioning” needs to be disabled, how to do it?
Beta Was this translation helpful? Give feedback.
All reactions