V200R001C00SPC132 firmware in SUN2000L-[X]KTL-L1 #503
Replies: 2 comments 8 replies
-
The list of firmware / models that people have tested is kept at: https://github.com/wlcrs/huawei_solar/wiki/Confirmed-firmware#confirmed-firmware-versions Whilst the M1's are tested up to SPC155.... and v156 just adds some OEM branding for Australia / New Zealand, v157 adds EMMA support and v158 dropped last week and just adds Philipines / Isreali grid support. The latest anyone has tested (and updated to this list) is V200R001C00SPC132 for L1's. For M1's its tested to V100R001C00SPC155. Looking at the release notes for the L1's it looks like SPC133 ( you can freely get from https://photomate.zendesk.com/hc/en-gb/articles/4408009530909-SUN2000-2-6-KTL-L1 ) this is the same as the M1's SPC156. As this just adds some branding for AU/NZ this should work fine on your L1 + WLCRS. L1 SPC135 firmware would therefore look to be the same as the M1's SPC158, so if you have access to that you can add support for the forthcoming EMMA (replaces sdongle / DDSU-666 meter / logger). If you have registered you inverter and can access, it can be downloaded from: https://support.huawei.com/enterprise/en/fusionsolar/sun2000l-pid-22027611/software/261182421?idAbsPath=fixnode01%7C258788303%7C254827209%7C258792409%7C22027611 Whatever you do, remember to update the supported firmware list, at the above link. |
Beta Was this translation helpful? Give feedback.
-
I can confirm that the latest firware ...132 for the ...L1 models is working well with the integration. |
Beta Was this translation helpful? Give feedback.
-
Hello,
has anyone tried the latest inverter firmware version (V200R001C00SPC132) for the SUN2000L-[X]KTL-L1 models?
[X] can be 4, 5, 6 etc
Does this integration work well?
Thanks
Beta Was this translation helpful? Give feedback.
All reactions