You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
What is the active power sensor reporting?
Why is the inverter active power value (green line) following the main power consumtion, i.e. the heat pump power (blue line)?
Why does it do that only until the Battery SOC hits the 100% (orange line)?
Shouldn't the inverter active power (green line) follow the inverter input power (yellow line)?
Assumption: Inverter Active Power is AC Output Power and PV Power Is Inverter DC Input Power.
Can someone help and explain?
Thanks in advance.
Bescribe your Huawei Solar Setup
Inverter Type: SUN2000-10KTL-M1
Inverter Firmware version: V100R001C00SPC153
SDongle present: yes
Power meter present: three phase
Battery: LUNA2000 5kWh
Battery Firmware version: couldn't find
This discussion was converted from issue #611 on February 03, 2024 18:49.
Heading
Bold
Italic
Quote
Code
Link
Numbered list
Unordered list
Task list
Attach files
Mention
Reference
Menu
reacted with thumbs up emoji reacted with thumbs down emoji reacted with laugh emoji reacted with hooray emoji reacted with confused emoji reacted with heart emoji reacted with rocket emoji reacted with eyes emoji
-
Describe the issue
What is the active power sensor reporting?
Why is the inverter active power value (green line) following the main power consumtion, i.e. the heat pump power (blue line)?
Why does it do that only until the Battery SOC hits the 100% (orange line)?
Shouldn't the inverter active power (green line) follow the inverter input power (yellow line)?
Assumption: Inverter Active Power is AC Output Power and PV Power Is Inverter DC Input Power.
Can someone help and explain?
Thanks in advance.
Bescribe your Huawei Solar Setup
Inverter Type: SUN2000-10KTL-M1
Inverter Firmware version: V100R001C00SPC153
SDongle present: yes
Power meter present: three phase
Battery: LUNA2000 5kWh
Battery Firmware version: couldn't find
How do you connect to the inverter?
Via the SDongle, wireless connection
Upload your Diagnostics File
config_entry-huawei_solar-888affa8a891f0b7a92f84b9b4347c7f.json.txt
Upload your relevant debug logs
Please confirm the following:
Beta Was this translation helpful? Give feedback.
All reactions