[FIXED] Sensor are all working great ... but no control entities (numbers, switch, etc) at all (like end of charge SOC for battery, etc ...)

[tmenguy]

[Keeping it for other to find ....was really simple to fix :) ]

Hi,

just plugged my new battery : sensor are working, all is good .... but it appears that I have none of the "control entities" only the sensor.
I'm referring to the one like in:

with control of the battery element, same for the inverter on/off .... am I missing something obvious?

I'm on the latest HA and latest 1.4.1.

In the diagnostics of the config I do have :
"supports_capacity_control": true

"pymodbus_version": "3.6.8",
"slave_0": {
  "model_name": "SUN2000-15K-MB0\u000001076371-006",
  "firmware_version": "V200R022D02",
  "software_version": "V200R023C10SPC200",
  "pv_string_count": 4,
  "has_optimizers": 40,
  "battery_type": 2,
  "battery_1_type": 2,
  "battery_2_type": 0,
  "power_meter_type": 1,
  "supports_capacity_control": true

Anything obvious I'm missing here?

Thanks for your help

[tmenguy]

Ok looking at the code and logs ... yes "Skipping number setup, as parameter configuration is not enabled" .... have to change the configuration .... but where to put this configuration? ... will dig a bit :)

[tmenguy]

For this who don't know ... to have those controls you NEED to click "elevate permissions" when you configure your integration ...