[Bug]: No configuration options for inverter/battery

[m-wo]

Describe the issue

Hi have the Huawei integration running for my 10KTL-M1 and my Luna2000-10-S0 but I don´t get the configuration options for each, as shown here for the inverter or here for the battery. Sensors work fine but I´d like to be able to control especially my battery.

Describe your Huawei Solar Setup

Inverter Type: Sun2000-10KTL-M1
Inverter Firmware version: V100R001C00SPC159
sDongle present: Yes
sDongle Type: sDongleA-05 (WiFi / Ethernet)
sDongle Connectivitiy: Ethernet
sDongle Firmware: V200R022C10SPC118
Power meter present: three phase
Optimizers Present: YNo
Battery: LUNA2000-SO 10kWh
Battery Firmware version: ?
Huawei Solar integration version: 1.4.1

How do you connect to the inverter?

Via the SUN2000-<serial_no> WiFi

Upload your Diagnostics File

config_entry-huawei_solar-09b6630743181e48bd8695159452c66c.json

Upload your relevant debug logs

Somehow I can´t upload here :/

Please confirm the following:

• I'm running the latest release of Home Assistant.
• I'm running the latest release of this integration.
• I did not find an existing issue describing this problem.
• I did upload the diagnostics-file that I could retrieve from the 'Devices & Services Page'
• I did upload the relevant debug logs (via 'Enable Debug Logging'-feature or by manually configuring HA logging)

[m-wo]

home-assistant_huawei_solar_2024-10-30T22-06-08.147Z.log
Here is the debug log