Skip to content

Latest commit

 

History

History
71 lines (58 loc) · 2.19 KB

README.md

File metadata and controls

71 lines (58 loc) · 2.19 KB
Raw

XIAO_IBUS_Neopixel

Seeeduino XIAO Neopixel control PoC

Throttle (Ch3) - Brightness Pitch (Ch1) - Speed

PotA - Hue PotB - Saturation

SwA - Color/Cylon Direction (Left / Right) SwB - Middle-Out (Enable / Disable) SwC - Animation Type (Color Wipe / Cylon / Solid) SwD - Linear Blend (Enable / Disable)

Wheel Position Input absolute position percentage of 255

output 255,255,255,255

SwD (high): Adjust Selected Color Profile

  • AdjustColorProfile()
  • SwC (1) w/ SwD (1000) = Hue
  • VrA = Adjust Hue values
  • SwC (2) w/ SwD (1500) = Saturation
  • VrA = Adjust Saturation values
  • SwC (3) w/ SwD (2000) = White
  • VrA = Adjust white values up and decrease RGB channels equivalently
  • SwB (low) = Coarse value tune
  • SwB (high) = Fine value tune
  • VrB = Brightness
  • Right Stick (left): Cycle Color Profile Selection (blink n+1 times for color profile number)
  • SelectColorProfile()
  • Right Stick (right): Cycle Color Profile Selection (blink n+1 times for color profile number)
  • SelectColorProfile()
  • Right Stick (up): Show current color profile saved values
  • GetColorProfile()
  • Right Stick (down): Save adjusted color profile values
  • SaveColorProfile()

SwD (low):

  • SwA (low): Standby
  • SwA (high): Begin selected state
  • SwB (low): Lock values
  • SwB (high): Unlock speed/brightness controls
  • VrA = Animation Speed
  • VrB = Brightness
  • SwC (1000): Select animation
  • SelectAnimation()
  • SwC (1500): Change animation direction
  • SetAnimationDirection()
  • Right Stick (right): Animation forward
  • Right Stick (left): Animation reverse
  • Left Stick (right): Normal end-to-end
  • Left Stick (left): Enable middle-out
  • Right Stick (down): Save direction

SelectColorProfile()

  • SwD (low): Show Selected Color Profile (where applicable)

  • Right Stick (right): Cycle Up Color Profile Selected (blink n times for color profile number)

  • Increase currColorProfile index number (roll over to 0 if index count exceeded)

  • ColorProfileBlink()

  • Right Stick (left): Cycle Down Color Profile Selected (blink n times for color profile number)

  • Decrease currColorProfile index number (roll over to index count if 0)

  • ColorProfileBlink()

  • ColorProfileBlink()