Pickle lint

Uses Gherkin to parse feature files and runs linting against the default rules, and the optional rules you specified in your .gherkin-lintrc file.

pickle-lint is forked from gherkin-lint and aims to:

• solve critical bugs of the project.
• improve the code quality adding more tests and moving side effects(logging, file reading, etc) to the top of the application.
• solve issues that have been open for a long time.
• improve the documentation.

If gherkin-lint is maintained again, pickle-lint will try to be merged into gherkin-lint.

Installation

npm install pickle-lint

Demo

To see the output for all the errors that the linter can detect run:

git clone https://github.com/xgbuils/pickle-lint.git
npm run demo

Or check this:

Available rules

Name	Functionality
no-tags-on-backgrounds *	Disallows tags on Background
one-feature-per-file *	Disallows multiple Feature definitions in the same file
up-to-one-background-per-file *	Disallows multiple Background definition in the same file
no-multiline-steps *	Disallows mutiline Steps
no-examples-in-scenarios	Disallow the use of "Examples" in scenarios
allowed-tags	Just the listed tags are allowed
indentation	Allows the user to specify indentation rules
max-scenarios-per-file	Allows the user to specify the max number of scenarios per feature file
name-length	Allows restricting length of Feature/Scenario/Step names
new-line-at-eof	Disallows/enforces new line at EOF
no-background-only-scenario	Disallows background when there is just one scenario
no-dupe-feature-names	Disallows duplicate Feature names
no-dupe-scenario-names	Disallows duplicate Scenario names
no-duplicate-tags	Disallows duplicate tags on the same Feature or Scenario
no-empty-background	Disallows features with backgrounds without steps
no-empty-file	Disallows empty feature files
no-files-without-scenarios	Disallows files with no scenarios
no-homogenous-tags	Disallows tags present on every Scenario in a Feature, rather than on the Feature itself
no-multiple-empty-lines	Disallows multiple empty lines
no-partially-commented-tag-lines	Disallows partially commented tag lines
no-restricted-tags	Disallow use of particular @tags
no-scenario-outlines-without-examples	Disallows scenario outlines without examples
no-superfluous-tags	Disallows tags present on a Feature and a Scenario in that Feature
no-trailing-spaces	Disallows trailing spaces
no-unnamed-features	Disallows empty Feature name
no-unnamed-scenarios	Disallows empty Scenario name
no-unused-variables	Disallows unused variables in scenario outlines
one-space-between-tags	Tags on the same time must be separated by a single space
use-and	Disallows repeated step names requiring use of And instead

* These rules cannot be turned off because they detect undocumented cucumber functionality that causes the gherkin parser to crash.

Rule Configuration

The not-configurable rules are turned on by default and cannot be turned off. Configurable rules can be customized using a file.

The configurable rules are off by default. To turn them on, you will need to create a json file, where you specify the name of each rule and its desired state (which can be "on" or "off"). Eg:

{
  "no-unnamed-features": "on"
}

will turn on the no-unnamed-features rule.

allowed-tags

allowed-tags must be configured with list of tags for it to have any effect:

{
  "allowed-tags": ["on", {"tags": ["@watch", "@wip", "@todo"]}]
}

Any tag not included in this list won't be allowed.

indentation

indentation can be configured in a more granular level and uses following rules by default:

• Expected indentation for Feature, Background, Scenario, Examples heading: 0 spaces
• Expected indentation for Steps and each example: 2 spaces

You can override the defaults for indentation like this:

{
  "indentation" : [
    "on", {
      "Feature": 0,
      "Background": 0,
      "Scenario": 0,
      "Step": 2,
      "Examples": 0,
      "example": 2,
      "given": 2,
      "when": 2,
      "then": 2,
      "and": 2,
      "but": 2,
      "feature tag": 0,
      "scenario tag": 0
    }
  ]
}

There is no need to override all the defaults, as is done above, instead they can be overriden only where required. Step will be used as a fallback if the keyword of the step, eg. 'given', is not specified. If feature tag is not set then Feature is used as a fallback, and if scenario tag is not set then Scenario is used as a fallback.

This feature is able to handle all localizations of the gherkin steps.

max-scenarios-per-file

max-scenarios-per-file rule can be configured to set the number of max scenarios per file. The configuration looks like this:

{
  "max-scenarios-per-file": {"on", {"maxScenarios": 10}}
}

The default value is 10.

name-length

name-length can be configured separately for Feature, Scenario and Step names. The default is 70 characters for each of these:

{
  "name-length" : ["on", { "Feature": 70, "Scenario": 70, "Step": 70 }]
}

new-line-at-eof

new-line-at-eof can also be configured to enforcing or disallowing new lines at EOF.

• To enforce new lines at EOF:

{
  "new-line-at-eof": ["on", "yes"]
}

• To disallow new lines at EOF:

{
  "new-line-at-eof": ["on", "no"]
}

no-restricted-tags

no-restricted-tags must be configured with list of tags for it to have any effect:

{
  "no-restricted-tags": ["on", {"tags": ["@watch", "@wip", "@todo"]}]
}

Configuration File

The default name for the configuration file is .gherkin-lintrc and it's expected to be in your working directory.

If you are using a file with a different name or a file in a different folder, you will need to specify the -c or --config option and pass in the relative path to your configuration file. Eg: pickle-lint -c path/to/configuration/file.extention

You can find an example configuration file, that turns on all of the rules in the root of this repo (.gherkin-lintrc).

Ignoring Feature Files

There are 2 ways you can specify files that the linter should ignore:

1. Add a .gherkin-lintignore file in your working directory and specify one glob pattern per file line
2. Use the command line option-i or --ignore, pass in a comma separated list of glob patterns. If specified, the command line option will override the .gherkin-lintignore file.

Custom rules

You can specify one more more custom rules directories by using the -r or --rulesdir command line option. Rules in the given directories will be available additionally to the default rules.

Example:

pickle-lint --rulesdir "/path/to/my/rulesdir" --rulesdir "from/cwd/rulesdir"

Paths can either be absolute or relative to the current working directory. Have a look at the src/rules/ directory for examples; The no-empty-file rule is a good example to start with.