diff --git a/README.md b/README.md
index 37e6e5c..ac7b0c2 100644
--- a/README.md
+++ b/README.md
@@ -99,7 +99,7 @@ in **[`TOOLS.md`](./TOOLS.md)** but a brief description of each tool is included
 
 # Hardware requirements
 
-USB-adapters, GPIO-modules, and development-boards flashed with TI's Z-Stack Coordinator firmware are compatible with zigpy-znp
+USB-adapters, GPIO-modules/shields/hats, and development-boards with TI's Z-Stack Coordinator firmware are compatible with zigpy-znp.
 
 Note! CC26x2 and CC13x2 are currently the only ZNP based adapters that fully support forming a Zigbee 3.0 network and using ZGP.
 
@@ -107,10 +107,10 @@ Note! CC26x2 and CC13x2 are currently the only ZNP based adapters that fully sup
 
 The adapters below are recommended because they use powerful chips, can handle large networks and firmware is well maintained:
 
- - CC2652P/CC2652R/CC2652RB USB stick and dev board hardware
- - CC1352P/CC1352R USB stick and dev board hardware
+ - CC2652P/CC2652R/CC2652RB USB stick and dev board hardware (**recommended with [latest stable community firmware](https://github.com/Koenkk/Z-Stack-firmware/tree/master/coordinator/Z-Stack_3.x.0/bin)**)
+ - CC1352P/CC1352R USB stick and dev board hardware (**recommended with [latest stable community firmware](https://github.com/Koenkk/Z-Stack-firmware/tree/master/coordinator/Z-Stack_3.x.0/bin)**)
 
-Tip! CC2652/CC1352 adapters listed as [recommended by Zigbee2MQTT](https://www.zigbee2mqtt.io/guide/adapters/#recommended)" are also compatible with zigpy-znp.
+Tip! CC26x2/CC13x2adapters listed as [recommended by Zigbee2MQTT](https://www.zigbee2mqtt.io/guide/adapters/#recommended) are also compatible with zigpy-znp.
 
 ### Older supported ZNP adapters no longer recommended for new purchase