th1_8285.yaml

#------------------------------
#-- th1_8285.yaml
#-- Mini station météo sur batterie en mode dsleep
#-- Lit la tmpérature et l'humidité du capteur HTU21D et se connecte sur le broker MQTT
#-- zf210611.0720
#--


# sources: 
# https://esphome.io/components/sensor/htu21d.html
# https://esphome.io/components/mqtt.html
# https://esphome.io/components/deep_sleep.html


# Configuration ESPhome
esphome:
  name: th1_8285
  platform: ESP8266
  board: esp8285
  on_boot:
    - switch.turn_on: led
    #- delay: 25s
    - delay: 30s
    - logger.log: Y'a un problème, je dois dormir !
    - mqtt.publish:
        topic: th1_8285/ota/state
        payload: 'OFF'
        retain: true
    - delay: 0.5s
    - deep_sleep.enter: deep_sleep_1

# Configuration WIFI
wifi:
  fast_connect: true
  ssid: !secret wifi_ssid
  password: !secret wifi_password

#  networks:
#  - ssid: !secret wifi_ssid
#  - password: !secret wifi_password
#  - ssid: !secret wifi_ssid2
#  - password: !secret wifi_password2
#  - ssid: !secret wifi_ssid3
#  - password: !secret wifi_password3
#  - ssid: !secret wifi_ssid4
#  - password: !secret wifi_password4
#  - ssid: !secret wifi_ssid5
#  - password: !secret wifi_password5
  
# Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "th1_8285 Fallback"
    password: !secret ap_wifi_password

captive_portal:

# Enable logging
logger:
  level: DEBUG
  logs:
    logger: INFO
    adc: INFO
    captive_portal: INFO
    deep_sleep: INFO
    htu21d: INFO
    i2c: INFO
    ota: INFO
    restart: INFO
    sensor: INFO
    switch: INFO
    switch.gpio: INFO
    uptime.sensor: INFO
    web_server: INFO
    wifi_signal.sensor: INFO
    mqtt: INFO
    mqtt.component: INFO
    mqtt.client: INFO
    mqtt.switch: INFO
    mqtt.sensor: INFO

# Enable Home Assistant API
#api:
#  password: !secret api_password

ota:
  password: !secret ota_password








globals:
   - id: ota_state
     type: int
     initial_value: '0'

interval:
  - interval: 1s
    then:
      if:
        condition:
          mqtt.connected:
        then:
          - logger.log: MQTT est connecté !
          - if:
              condition:
                lambda: 'return id(ota_state) == 1;'
              then:
                - logger.log: OTA est demandé !
                - mqtt.publish:
                    topic: th1_8285/ota/command
                    payload: 'OFF'
                    retain: true
                - mqtt.publish:
                    topic: th1_8285/ota/state
                    payload: 'ON'
                    retain: true
                - logger.log: J'arrête le desleep !
                - deep_sleep.prevent: deep_sleep_1
              else:
                - logger.log: Je suis connected et envoie la sauce !
                - delay: 1.5s
                - logger.log: Je vais dormir !
                - mqtt.publish:
                    topic: th1_8285/ota/state
                    payload: 'OFF'
                    retain: true
                - delay: 0.5s
                - deep_sleep.enter: deep_sleep_1
        else:
          - logger.log: MQTT en attente d'être connecté !















# Définition des Switch's
switch:
  - platform: gpio
    name: "th1_8285 LED"
    inverted: True
    id: led
    pin: GPIO2
  - platform: restart
    name: "th1_8285 Restart"

# WEB Server
web_server:
  port: 80

# MQTT server
mqtt:
  broker:  !secret mqtt_server_dev
  port:  !secret mqtt_port_dev
  username:  !secret mqtt_user_dev
  password:  !secret mqtt_password_dev
  birth_message:
  will_message:
  on_message:
    - topic: th1_8285/ota/command
      payload: 'ON'
      then:
        - logger.log: Receive OTA command !
        - globals.set:
            id: ota_state
            value: '1'

# I2C conf
i2c:
  sda: GPIO4
  scl: GPIO14

# Sensors
sensor:
  - platform: wifi_signal
    name: "th1_8285 Signal Wi-Fi"
    update_interval: 3s
  - platform: uptime
    name: "th1_8285 uptime"
    update_interval: 3s
  - platform: htu21d
    temperature:
      name: "th1_8285 Température"
    humidity:
      name: "th1_8285 Humidité"
    update_interval: 3s
  - platform: adc
    pin: VCC
    name: "th1_8285 VCC Voltage"
    update_interval: 3s

# Sensors text
text_sensor:
  - platform: wifi_info
    ip_address:
      name: th1_8285 IP Address
      id: wifi_ip
    ssid:
      name: th1_8285 Connected SSID
      id: wifi_ssid



# Deep Sleep
deep_sleep:
  run_duration: 10s
  sleep_duration: 60s
  id: deep_sleep_1