Evohome device communication communication fail issues.

[awhatford]

I have set up as all default apart from setting up mqto as I am using a Ramses esp over mqto.
I have over the 1st 24 hours lost intermittent random devices from my Evohome I suspect that the Ramses cc is polling each device and then these devices are not bothering to talk to the evohome after that because of some battery saving timer ect.

I have tried disabling polling through haos setting devices in gui but in mqto listener I can still see tx messages so I am not optimistic that this will resolve the issue.

On reading the wiki I can see I can set disable sending to true unfortunately using the limited search feature in the native haos gui I can't find the corresponding line in the config flow file so guessing that was the historic config file any pointers would be welcome.

[zxdavb]

I have over the 1st 24 hours lost intermittent random devices from my Evohome I suspect that the Ramses cc is polling each device and then these devices are not bothering to talk to the evohome after that because of some battery saving timer ect.

ramses_rf does not poll any battery-powered devices (e.g. TRVs, thermostats and CS92As).

It will only poll the controller, any BDR91A/Ts, and any UFH controllers.