Skip to content

An IPAM provider for Cluster API that manages pools of IP addresses using Kubernetes resources.

License

Notifications You must be signed in to change notification settings

65278/cluster-api-ipam-provider-in-cluster

 
 

Repository files navigation

Cluster API IPAM Provider In Cluster

This is an IPAM provider for Cluster API that manages pools of IP addresses using Kubernetes resources. It serves as a reference implementation for IPAM providers, but can also be used as a simple replacement for DHCP.

IPAM providers allow to control how IP addresses are assigned to Cluster API Machines. It is usually only useful for non-cloud deployments. The infrastructure provider in use must support IPAM providers in order to use this provider.

Features

  • Manages IP Addresses in-cluster using custom Kubernetes resources
  • Address pools can be cluster-wide or namespaced
  • Pools can consist of subnets, arbitrary address ranges and/or individual addresses
  • Both IPv4 and IPv6 are supported
  • Individual addresses, ranges and subnets can be excluded from a pool
  • Well-known reserved addresses are excluded by default, which can be configured per pool

Setup via clusterctl

This provider comes with clusterctl support. Since it's not added to the built-in list of providers yet, you'll need to add the following to your $XDG_CONFIG_HOME/cluster-api/clusterctl.yaml if you want to install it using clusterctl init --ipam in-cluster:

providers:
  - name: in-cluster
    url: https://github.com/kubernetes-sigs/cluster-api-ipam-provider-in-cluster/releases/latest/ipam-components.yaml
    type: IPAMProvider

Usage

This provider comes with two resources to specify pools from which addresses can be allocated: the InClusterIPPool and the GlobalInClusterIPPool. As the names suggest, the former is namespaced, the latter is cluster-wide. Otherwise they are identical. The following examples will all use the InClusterIPPool, but all examples work with the GlobalInClusterIPPool as well.

A simple pool that covers an entire /24 IPv4 network could look like this:

apiVersion: ipam.cluster.x-k8s.io/v1alpha2
kind: InClusterIPPool
metadata:
  name: inclusterippool-sample
spec:
  addresses:
    - 10.0.0.0/24
  prefix: 24
  gateway: 10.0.0.1

IPv6 is also supported, but a single pool can only consist of v4 or v6 addresses, not both. For simplicity we'll stick to IPv4 in the examples.

The addresses field supports CIDR notation, as well as arbitrary ranges and individual addresses. Using the excludedAddresses field, addresses, ranges or subnets can be excluded from the pool.

apiVersion: ipam.cluster.x-k8s.io/v1alpha2
kind: InClusterIPPool
metadata:
  name: inclusterippool-sample
spec:
  addresses:
    - 10.0.0.0/24
    - 10.0.1.10-10.0.1.100
    - 10.0.2.1
    - 10.0.2.2
  excludeAddresses:
    - 10.10.0.16/28
    - 10.10.0.242
    - 10.0.1.25-10.0.1.30
  prefix: 22
  gateway: 10.0.0.1

Be aware that the prefix needs to cover all addresses that are part of the pool. The first network in the addresses list and the prefix field, which specifies the length of the prefix, is used to determine the prefix. In this case, 10.1.0.0/24 in the addresses list would lead to a validation error.

The gateway will never be allocated. By default, addresses that are usually reserved will not be allocated either. For v4 networks this is the first (network) and last (broadcast) address within the prefix. In the example above that would be 10.0.0.0 and 10.0.3.255 (the latter not being in the network anyway). For v6 networks the first address is excluded.

If you want to use all networks that are part of the prefix, you can set allocateReservedIPAddresses to true. In the example below, both 10.0.0.0 and 10.0.0.255 will be allocated. The gateway will still be excluded.

apiVersion: ipam.cluster.x-k8s.io/v1alpha2
kind: InClusterIPPool
metadata:
  name: inclusterippool-sample
spec:
  addresses:
    - 10.0.0.0/24
  prefix: 24
  gateway: 10.0.0.1
  allocateReservedIPAddresses: true

Community, discussion, contribution, and support

The in-cluster IPAM provider is part of the cluster-api project. Please refer to it's readme for information on how to connect with the project.

The best way to reach the maintainers of this sub-project is the #cluster-api channel on the Kubernetes Slack.

Pull Requests and feedback on issues are very welcome! See the issue tracker if you're unsure where to start, especially the Good first issue and Help wanted tags, and also feel free to reach out to discuss.

Code of conduct

Participation in the Kubernetes community is governed by the Kubernetes Code of Conduct.

About

An IPAM provider for Cluster API that manages pools of IP addresses using Kubernetes resources.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Go 89.2%
  • Python 4.1%
  • Makefile 3.8%
  • Shell 1.8%
  • Dockerfile 0.7%
  • Starlark 0.4%