The code folder contains the Arduino libraries used in the glowing eyes code (neopixel). The code folder also has the default firmware for the glowing eyes code (glow.ino).

To flash an ATTINY85, follow this guide: http://highlowtech.org/?p=1695

The two eagle files for the board are in the eagle folder.

The Lawlor head stl is included as well in the stl folder. The Lawlor head stl was printed with no support, 0% fill, no floor, 1 shell (probably be better with 2 shells).

The flyer is included...just because...

Links to parts (note, these are not 1x): http://www.ebay.com/itm/300954972934 pcbs http://www.ebay.com/itm/201410141836 8pin socket http://www.ebay.com/itm/261987455019 attiny85 http://www.ebay.com/itm/261819895437 5v reg http://www.ebay.com/itm/151492714462 9v connectors http://www.ebay.com/itm/140942027356 tact switches http://www.ebay.com/itm/331590500783 switches http://www.ebay.com/itm/251889773335 8pin usb thingy http://www.ebay.com/itm/111164910188 ws2812 leds

Other Links (other cool stuff we talked about): http://www.ebay.com/itm/130999706774 mill http://www.ebay.com/itm/300954972934 laser cutter http://www.ebay.com/itm/201214891226 3d printer