Fixposition ROS Driver

ROS (both ROS1 and ROS2) Driver for Fixposition Vision-RTK 2.

The driver is designed to listen on a TCP or Serial port for the Fixposition ASCII Messages, and then publish them as corresponding ROS messages. At the same time, the driver can also subscribe to a speed input message, which will be sent back to the Vision-RTK 2 sensor and provide an external speed input.

For the output ROS messages, see Output of the driver
For the input ROS messages for speed input, see Input Wheelspeed through the driver

How to use it

The code is split in the following 3 parts:

fixposition_driver_lib: common CMake library to parse Fixposition ASCII Messages. For more details and build instructions, see here.
fixposition_driver_ros1: ROS1 driver node to subscribe and publish in the ROS1 framework. For more details and build instructions, see here.
fixposition_driver_ros2: ROS2 driver node to subscribe and publish in the ROS2 framework. For more details and build instructions, see here.

ROS 1

For more details and build instructions, see here.

Installation

To install the node, extract / clone the code and fixposition_gnss_tf to your catkin workspace's src folder:

# The folder structure should look like this
fp_public_ws
├── src
│   ├── fixposition_driver
│   │   ├── fixposition_driver_lib
│   │   ├── fixposition_driver_ros1
│   │   ├── fixposition_driver_ros2 # will be ignore by catkin
│   ├── fixposition_gnss_tf

Add a file named 'CATKIN_IGNORE' to fixposition_driver_ros2 folder.

make sure you have sourced the setup.bash from ros:

/opt/ros/{ROS_DISTRO}/setup.bash, for example

source /opt/ros/melodic/setup.bash`

and build it with:

catkin build fixposition_driver_ros1

This will build the ROS1 driver node and all its dependencies.

Then source your development environment:

source devel/setup.bash

Launch the Driver

To launch the node in serial mode, run:

roslaunch fixposition_driver_ros1 serial.launch
In TCP mode (Wi-Fi):

roslaunch fixposition_driver_ros1 tcp.launch
In TCP mode (Ethernet):

roslaunch fixposition_driver_ros1 tcp.launch

To change the settings of TCP (IP, Port) or Serial (Baudrate, Port) connections, check the launch/tcp.yaml and launch/serial.yaml files.

ROS 2

For more details and build instructions, see here.

Installation

To install the node, extract / clone the code and fixposition_gnss_tf to your catkin workspace's src folder:

# The folder structure should look like this
fp_public_ws
├── src
│   ├── fixposition_driver
│   │   ├── fixposition_driver_lib
│   │   ├── fixposition_driver_ros1 # will be ignore by colcon when building for ROS2
│   │   ├── fixposition_driver_ros2
│   ├── fixposition_gnss_tf

Add a file named 'COLCON_IGNORE' to fixposition_driver_ros1 folder.

make sure you have sourced the setup.bash from ros:

/opt/ros/{ROS_DISTRO}/setup.bash, for example

source /opt/ros/foxy/setup.bash

and build it with:

colcon build --packages-up-to fixposition_driver_ros2

This will build the ROS2 driver node and all its dependencies.

Then source your environment after the build:

source install/setup.bash

Launch the Driver

To launch the node in serial mode, run:

ros2 launch fixposition_driver_ros2 serial.launch
In TCP mode (Wi-Fi):

ros2 launch fixposition_driver_ros2 tcp.launch
In TCP mode (Ethernet):

ros2 launch fixposition_driver_ros2 tcp.launch

To change the settings of TCP (IP, Port) or Serial (Baudrate, Port) connections, check the launch/tcp.yaml and launch/serial.yaml files and read this note below.

Note

ROS2, unlike ROS1, by default uses a install directory in the workspace. So when you do ros2 launch xxx, the configuration and launch files are taken from the install and not directly from the src directory.

If you want to modify the parameters in the YAML files. You can:

Modify the YAML file in the src directory and then re-run colcon build --packages-up-to fixposition_driver_ros2 to update them into the install directory.

or
Modify the YAML file in install. However, the next time you do colcon build they will be overriden by the files in src.

Output of the driver

Messages and TF tree

The output is published on the following:

Vision-RTK2 Fusion

From FP_A-ODOMETRY, at the configured frequency (default 10Hz, output generator -> Fusion frequency):

Messages

Topic	Message Type	Frequency	Description
`/fixposition/odometry`	`nav_msgs/Odometry`	as configured on web-interface	Position, Orientation from ECEF to FP_POI, Velocity and Angular Velocity in FP_POI
`/fixposition/odomsh`	`nav_msgs/Odometry`	as configured on web-interface	Position, Orientation from ECEF to FP_POI, Velocity and Angular Velocity in FP_POI. Based on smooth odometry output.
`/fixposition/odometry_enu`	`nav_msgs/Odometry`	as configured on web-interface	Position, Orientation from ENU0 to FP_POI, Velocity and Angular Velocity in FP_POI
`/fixposition/vrtk`	`fixposition_driver/VRTK`	as configured on web-interface	Custom Message containing same Odometry information as well as status flags
`/fixposition/poiimu`	`sensor_msgs/Imu`	as configured on web-interface	Bias Corrected acceleration and rotation rate in FP_POI
`/fixposition/ypr`	`geometry_msgs/Vector3`	as configured on web-interface	x = Yaw, y = Pitch, z = Roll in radian. Euler angles representation of rotation between ENU and P_POI. Only available after fusion initialization.

From FP_A-LLH, at the configured frequency (default 10Hz, output generator -> Fusion frequency):

Topic Message Type Frequency Description

/fixposition/navsatfix sensor_msgs/NavSatFix as configured on web-interface Latitude, Longitude and Height

Vision-RTK2 GNSS Antenna Positions

If GNSS Antenna positions are needed, please enable this on the sensor's configuration interface.

From NOV_B-BESTGNSSPOS_GNSS[1,2], at the configured frequency, GNSS1 and GNSS2 raw antenna positions (default 5Hz):

Topic	Message Type	Frequency	Description
`/fixposition/gnss1`	`sensor_msgs/NavSatFix`	as configured on web-interface	Latitude, Longitude and Height
`/fixposition/gnss2`	`sensor_msgs/NavSatFix`	as configured on web-interface	Latitude, Longitude and Height

From NMEA-GP-GGA_GNSS, NMEA-GP-RMC_GNSS, and NMEA-GP-ZDA_GNSS, at the configured frequency (default 5Hz): The Vision-RTK2 can also output an average GNSS-based LLH position (i.e., only GNSS, not Fusion) and heading estimate based on speed over ground (SOG) and course over ground (COG) - (i.e., the platform must be moving for it to be accurate) by utilizing several NMEA messages, which serves as an auxiliary output until Fusion is fully initialized. This message's output frequency equals the lowest frequency of any of these three message types. Note: This output should only be used until Fusion is fully initialized. Warning: This topic will only be populated when the sampling rate of all required NMEA messages is 1 (i.e., the default output frequency of the messages).

Topic Message Type Frequency Description

/fixposition/nmea fixposition_driver/NMEA as configured on web-interface Latitude, Longitude and Height

Vision-RTK2 IMU data

From FP_A-RAWIMU, at 200Hz:

Topic Message Type Frequency Description

/fixposition/rawimu sensor_msgs/Imu 200Hz Raw (without bias correction) IMU acceleration and angular velocity data in FP_VRTK frame
From FP_A-CORRIMU, at 200Hz:

Topic Message Type Frequency Description

/fixposition/corrimu sensor_msgs/Imu 200Hz Bias Corrected IMU acceleration and angular velocity data in FP_VRTK frame

From FP_A-TF_POIIMUH, at 200Hz:

Topic	Message Type	Frequency	Description
`/fixposition/imu_ypr`	`geometry_msgs/Vector3`	200Hz	x = 0.0, y = Pitch, z = Roll in radian. Euler angles representation of rotation between a local horizontal frame and P_POI. Rough estimation using IMU alone.

Transforms

TFs:

Frames	Topic	Message needed to be selected on web-interface	Frequency
`ECEF-->FP_POI`	`/tf`	`ODOMETRY`	as configured on web-interface
`ECEF-->FP_ENU`	`/tf`	`ODOMETRY`	as configured on web-interface
`ECEF-->FP_ENU0`	`/tf`	`ODOMETRY`	as configured on web-interface
`FP_POI-->FP_IMUH`	`/tf`	`ODOMETRY`	200Hz
`FP_POI-->FP_VRTK`	`/tf_static`	`TF_POI_VRTK`	1Hz
`FP_VRTK-->FP_CAM`	`/tf_static`	`TF_VRTK_CAM`	1Hz

ROS TF Tree:

graph TD;
ECEF-->FP_POI-->FP_VRTK-->FP_CAM
FP_POI-->FP_IMUH
ECEF-->FP_ENU
ECEF-->FP_ENU0

Please note that the corresponding messages also has to be selected on the Fixposition V-RTK's configuration interface.

Explaination of frame ids

Frame ID	Explaination
ECEF	Earth-Center-Earth-Fixed frame.
FP_VRTK	The coordinate frame on the V-RTK's housing on the Fixposition-Logo "X".
FP_POI	Point-Of-Interest, configured from V-RTK's web-interface with respect to the FP_VRTK frame. By default it is the same as FP_VRTK.
FP_ENU	The local East-North-Up coordinate frame with the origin at the same location as FP_POI.
FP_ENU0	The global fixed East-North-Up coordinate frame with the origin at the first received ODOMETRY position. Needed for visualization in Rviz.
FP_CAM	The camera coordinate frame of the V-RTK.
FP_IMUH	A local horizontal frame with the origin at the same location as FP_POI. This frame is a rough estimate determined by the IMU alone.

Input Wheelspeed through the driver

The fp_ros_driver supports inputting a Speed msg (msg/Speed.msg) through the /fixposition/speed topic. The Speed msg is defined as a vector of WheelSensor msgs (msg/WheelSensor.msg). This message in turn, is intended to be a simplified version of the FP_B-MEASUREMENTS, containing three integers (vx, vy, and vz), three booleans (validity of the three velocity integers), and a string indicating the sensor from which the measurement originates. The integer velocity values should be in [mm/s], to have enough precision when being converted into an integer format.

Internally, upon arriving to the ros driver, wheelspeed measurements are converted into a full FP_B-MEASUREMENTS message, and sent via the TCP or serial interface to the Vision-RTK2, where they will be further processed. For more details regarding the definition FP_B-MEASUREMENTS message, please refer to the following page, or to the VRTK2 integration manual.

Code Documentation

Run doxygen Doxyfile to generate Doxygen code documentation.

Fixposition ASCII messages

This is an exerpt from the Integration Manual

Message structure

NMEA style framing is used. Frames (messages) are in this form:

$FP,msg_type,msg_version,field₃,field₄,...,field_N*CC\r\n

Where:

The NMEA style framing:
- $ -- Start character ("$", ASCII 36)
- *CC -- Checksum: "*" (ASCII 42) and two digit XOR value of all payload characters in captial hexadecimal notation, for example: "FPX" = 'F' ^ 'P' ^ 'X' = 70 ^ 80 ^ 88 = 78 = 0x4e = checksum 4E
- \r\n -- Sentence termination characters (CR + LF, ASCII 13 + 10)
A Fixposition identifier:
- FP -- Fixposition ASCII message identifier, "FP" (ASCII 70 + 80)
Fixposition message type and version:
- msg_type (= field₁) -- Message type, all captial letters (ASCII 65--90)
- msg_version (= field₂) -- Message version, decimal number (letters 0--9, ASCII 48--57), range 1--...
Data fields (payload)
- field₃,field₄,...,field_N -- The structure of the message data is defined by the msg_type and version. Each field can contain all printable 7-bit ASCII characters (ASCII 32–126), excluding the reserved characters ! (ASCII 33), $ (ASCII 36), * (ASCII 42), , (ASCII 44), \ (ASCII 92), ~ (ASCII 126).
Field separators
- All fields (identifier, message type, message version, data fields) are separated by a comma (,, ASCII 44)
Null fields
- Data fields can be null, meaning their value is absent to indicate that no data is available. The data for null fields is the empty string. For example:
  - Definition: ...,field_i,field_i+1,field_i+2,...
  - Values: field_i = 123, field_i+1 = null, field_i+2 = 456
  - Payload string: ...,123,,456,...
Data field types:
- Numeric: Decimal integer number, one or more digits (0-9) and optional leading "-" sign
- Float (.x): Decimal floating point number, one or more digits (0-9) and optional leading "-" sign, with x digits fractional part separated by a dot (".")
- Float (x): Decimal floating point number with x significant digits, optional leading "-", optional fractional part separated by a dot (".")
- String: String of allowed payload characters (but not the , field separator)
- ...
- ...

ODOMETRY message

This message contains full fusion odometry output and additional status information. It is output at the configured rate.

Example message (wrapped on multiple lines for readability):

$FP,ODOMETRY,2,2231,227610.750000,4279243.1641,635824.2171,4671589.8683,-0.412792,0.290804,-0.123898,0.854216,
-17.1078,-0.0526,-0.3252,0.02245,0.00275,0.10369,-1.0385,-1.3707,9.8249,4,1,8,8,1,
0.01761,0.02274,0.01713,-0.00818,0.00235,0.00129,0.00013,0.00015,0.00014,-0.00001,0.00001,0.00002,
0.03482,0.06244,0.05480,0.00096,0.00509,0.00054,fp_release_vr2_2.54.0_160*4F\r\n

Message fields:

#	Field	Format	Unit	Example	Description
1	`msg_type`	String	-	`ODOMETRY`	Message type, always `ODOMETRY` for this message
2	`msg_version`	Numeric	-	`2`	Message version, always `2` for this version of the `ODOMETRY` message
3	`gps_week`	Numeric	-	`2231`	GPS week number, range 0--9999
4	`gps_tow`	Float (.6)	s	`227610.750000`	GPS time of week, range 0.000--604799.999999
5	`pos_x`	Float (.4)	m	`4279243.1641`	Position in ECEF, X component
6	`pos_y`	Float (.4)	m	`635824.2171`	Position in ECEF, Y component
7	`pos_z`	Float (.4)	m	`4671589.8683`	Position in ECEF, Z component
8	`orientation_w`	Float (.6)	-	`-0.412792`	Quaternion with respect to ECEF, W component
9	`orientation_x`	Float (.6)	-	`0.290804`	Quaternion with respect to ECEF, X component
10	`orientation_y`	Float (.6)	-	`-0.123898`	Quaternion with respect to ECEF, Y component
11	`orientation_z`	Float (.6)	-	`0.854216`	Quaternion with respect to ECEF, Z component
12	`vel_x`	Float (.4)	m/s	`-17.1078`	Velocity in output frame, X component
13	`vel_y`	Float (.4)	m/s	`-0.0526`	Velocity in output frame, Y component
14	`vel_z`	Float (.4)	m/s	`-0.3252`	Velocity in output frame, Z component
15	`rot_x`	Float (.5)	rad/s	`0.02245`	Bias corrected angular velocity in output frame, X component
16	`rot_y`	Float (.5)	rad/s	`0.00275`	Bias corrected angular velocity in output frame, Y component
17	`rot_z`	Float (.5)	rad/s	`0.10369`	Bias corrected angular velocity in output frame, Z component
18	`acc_x`	Float (.4)	m/s²	`-1.0385`	Bias corrected acceleration in output frame, X component
19	`acc_y`	Float (.4)	m/s²	`-1.3707`	Bias corrected acceleration in output frame, Y component
20	`acc_z`	Float (.4)	m/s²	`9.8249`	Bias corrected acceleration in output frame, Z component
21	`fusion_status`	Numeric	-	`4`	Fustion status, see below
22	`imu_bias_status`	Numeric	-	`1`	IMU bias status, see below
23	`gnss1_fix`	Numeric	-	`8`	Fix status of GNSS1 receiver, see below
24	`gnss2_fix`	Numeric	-	`8`	Fix status of GNSS2 receiver, see below
25	`wheelspeed_status`	Numeric	-	`1`	Wheelspeed status, see below
26	`pos_cov_xx`	Float (5)	m²	`0.01761`	Position covariance, element XX
27	`pos_cov_yy`	Float (5)	m²	`0.02274`	Position covariance, element YY
28	`pos_cov_zz`	Float (5)	m²	`0.01713`	Position covariance, element ZZ
29	`pos_cov_xy`	Float (5)	m²	`-0.00818`	Position covariance, element XY
30	`pos_cov_yz`	Float (5)	m²	`0.00235`	Position covariance, element YZ
31	`pos_cov_xz`	Float (5)	m²	`0.00129`	Position covariance, element XZ
32	`orientation_cov_xx`	Float (5)	rad²	`0.00013`	Velocity covariance, element XX
33	`orientation_cov_yy`	Float (5)	rad²	`0.00015`	Velocity covariance, element YY
34	`orientation_cov_zz`	Float (5)	rad²	`0.00014`	Velocity covariance, element ZZ
35	`orientation_cov_xy`	Float (5)	rad²	`-0.00001`	Velocity covariance, element XY
36	`orientation_cov_yz`	Float (5)	rad²	`0.00001`	Velocity covariance, element YZ
37	`orientation_cov_xz`	Float (5)	rad²	`0.00002`	Velocity covariance, element XZ
38	`vel_cov_xx`	Float (5)	m²/s²	`0.03482`	Velocity covariance, element XX
39	`vel_cov_yy`	Float (5)	m²/s²	`0.06244`	Velocity covariance, element YY
40	`vel_cov_zz`	Float (5)	m²/s²	`0.05480`	Velocity covariance, element ZZ
41	`vel_cov_xy`	Float (5)	m²/s²	`0.00096`	Velocity covariance, element XY
42	`vel_cov_yz`	Float (5)	m²/s²	`0.00509`	Velocity covariance, element YZ
43	`vel_cov_xz`	Float (5)	m²/s²	`0.00054`	Velocity covariance, element XZ
44	`sw_version`	String	-	`fp_release_vr2_2.54.0_160`	Software version

Fusion status (fusion_status):

Value	Description
`0`	Not started
`1`	Vision only
`2`	Visual inertial fusion
`3`	Inertial-GNSS fusion
`4`	Visual-inertial-GNSS fusion

IMU bias status (imu_bias_status):

Value	Description
`0`	Not converged
`1`	IMU bias converged

GNSS fix type (gnss1_fix, gnss2_fix):

Value	Description
`0`	Unknown
`1`	No fix
`2`	Dead-reckoning only
`3`	Time-only fix
`4`	Single 2D fix
`5`	Single 3D fix
`6`	Single 3D fix with dead-reckoning
`7`	RTK float fix
`8`	RTK fixed fix

Wheelspeed status (wheelspeed_status):

Value	Description
`-1`	No wheelspeed enabled
`0`	At least one wheelspeed enabled, no wheelspeed converged
`1`	At least one wheelspeed enabled and converged

Remarks:

The output frame is the frame configured on the web-interface.

LLH message

This message contains time, geographic coordinates and the position covariance of the output frame in East-North-up (ENU). The coordinates are transformed from ECEF using the WGS-84 parameters (see also [[coordinates#vrtk-output-coordinate-system]]). It is output at the configured rate.

Example message (wrapped on multiple lines for readability):

$FP,LLH,1,2231,227563.250000,47.392357470,8.448121451,473.5857,
0.04533,0.03363,0.02884,0.00417,0.00086,-0.00136*62\r\n

Message fields:

#	Field	Format	Unit	Example	Description
1	`msg_type`	String	-	`LLH`	Message type, always `LLH` for this message
2	`msg_version`	Numeric	-	`1`	Message version, always `1` for this version of the `LLH` message
3	`gps_week`	Numeric	-	`2231`	GPS week number, range 0--9999
4	`gps_tow`	Float (.6)	s	`227563.250000`	GPS time of week, range 0.000--604799.999999
5	`latitude`	Float (.9)	deg	`47.392357470`	Latitude, range -90.000000000--90.000000000, > 0 for North, < 0 for South
6	`longitude`	Float (.9)	deg	`8.448121451`	Longitude, range -180.000000000--180.000000000, > 0 for East, < 0 for West
7	`height`	Float (.4)	m	`473.5857`	Ellipsoidal height, range -1000.0000-50000.0000
8	`pos_cov_ee`	Float (5)	m²	`0.04533`	Position covariance in ENU, element EE
9	`pos_cov_nn`	Float (5)	m²	`0.03363`	Position covariance in ENU, element NN
10	`pos_cov_uu`	Float (5)	m²	`0.02884`	Position covariance in ENU, element UU
11	`pos_cov_en`	Float (5)	m²	`0.00417`	Position covariance in ENU, element EN
12	`pos_cov_nu`	Float (5)	m²	`0.00086`	Position covariance in ENU, element NU
13	`pos_cov_eu`	Float (5)	m²	`-0.00136`	Position covariance in ENU, element EU

RAWIMU message

This message contains time, acceleration and angular velocity (raw value, no bias correction, only coordinate transformation applied) in the vrtk frame - the X on the sensor. See also [[coordinates#vrtk-output-coordinate-system]]. It is output at 200Hz IMU frequency regardless whether fusion is running or not.

Example message:

$FP,RAWIMU,1,2197,126191.777855,-0.199914,0.472851,9.917973,0.023436,0.007723,0.002131*34\r\n

Message fields:

#	Field	Format	Unit	Example	Description
1	`msg_type`	String	-	`RAWIMU`	Message type, always `RAWIMU` for this message
2	`msg_version`	Numeric	-	`1`	Message version, always `1` for this version of the `RAWIMU` message
3	`gps_week`	Numeric	-	`2197`	GPS week number, range 0--9999
4	`gps_tow`	Float (.6)	s	`126191.777855`	GPS time of week, range 0.000--604799.999999
5	`acc_x`	Float (.6)	m/s²	`-0.199914`	Raw acceleration in output frame, X component
6	`acc_y`	Float (.6)	m/s²	`0.472851`	Raw acceleration in output frame, Y component
7	`acc_z`	Float (.6)	m/s²	`9.917973`	Raw acceleration in output frame, Z component
8	`rot_x`	Float (.6)	rad/s	`0.023436`	Raw angular velocity in output frame, X component
9	`rot_y`	Float (.6)	rad/s	`0.007723`	Raw angular velocity in output frame, Y component
10	`rot_z`	Float (.6)	rad/s	`0.002131`	Raw angular velocity in output frame, Z component

CORRIMU message

This message contains time, acceleration and angular velocity (coordinate transformation and bias correction applied) in the vrtk frame - the X on the sensor. See also [[coordinates#vrtk-output-coordinate-system]]. It is output at 200Hz IMU frequency, but only when fusion is initialized and IMU biases is converged.

Example message:

$FP,CORRIMU,1,2197,126191.777855,-0.195224,0.393969,9.869998,0.013342,-0.004620,-0.000728*7D\r\n

Message fields:

#	Field	Format	Unit	Example	Description
1	`msg_type`	String	-	`CORRIMU`	Message type, always `RAWIMU` for this message
2	`msg_version`	Numeric	-	`1`	Message version, always `1` for this version of the `RAWIMU` message
3	`gps_week`	Numeric	-	`2197`	GPS week number, range 0--9999
4	`gps_tow`	Float (.6)	s	`126191.777855`	GPS time of week, range 0.000--604799.999
5	`acc_x`	Float (.6)	m/s²	`-0.195224`	Raw acceleration in output frame, X component
6	`acc_y`	Float (.6)	m/s²	`0.393969`	Raw acceleration in output frame, Y component
7	`acc_z`	Float (.6)	m/s²	`9.869998`	Raw acceleration in output frame, Z component
8	`rot_x`	Float (.6)	rad/s	`0.013342`	Raw angular velocity in output frame, X component
9	`rot_y`	Float (.6)	rad/s	`-0.004620`	Raw angular velocity in output frame, Y component
10	`rot_z`	Float (.6)	rad/s	`-0.000728`	Raw angular velocity in output frame, Z component

Remarks:

The output frame of the IMU messages is the X on VRTK sensor, NOT the frame configured from the webinterface (They are of course the same when on webinterface the configs are 0s).

TF message

This message contains information for static coordinate transformations.

Example messages:

$FP,TF,2,2233,315835.000000,VRTK,CAM,-0.00000,-0.00000,-0.00000,1.000000,0.000000,0.000000,0.000000*6B\r\n
$FP,TF,2,2233,315835.000000,POI,VRTK,-0.99301,-2.01395,-2.99298,0.999995,-0.002616,-0.001748,-0.000868*52\r\n

Message fields:

#	Field	Format	Unit	Example	Description
1	`msg_type`	String	-	`TF`	Message type, always `TF` for this message
2	`msg_version`	Numeric	-	`2`	Message version, always `2` for this version of the `TF` message
3	`gps_week`	Numeric	-	`2233`	GPS week number, range 0--9999
4	`gps_tow`	Float (.6)	s	`315835.000000`	GPS time of week, range 0.000--604799.999999
5	`frame_a`	String	-	`POI`	Target frame (maximum 8 characters: A-Z and 0-9)
6	`frame_b`	String	-	`VRTK`	Initial frame (maximum 8 characters: A-Z and 0-9)
7	`translation_x`	Float (.5)	m	`-0.99301`	Translation, X component
8	`translation_y`	Float (.5)	m	`-2.01395`	Translation, Y component
9	`translation_z`	Float (.5)	m	`-2.99298`	Translation, Z component
10	`orientation_w`	Float (.6)	-	`0.999995`	Rotation in quaternion, W component
11	`orientation_x`	Float (.6)	-	`-0.002616`	Rotation in quaternion, X component
12	`orientation_y`	Float (.6)	-	`-0.001748`	Rotation in quaternion, Y component
13	`orientation_z`	Float (.6)	-	`-0.000868`	Rotation in quaternion, Z component

Fixposition Odometry Converter

This is an extra node is provided to help with the integration of the wheel odometry on your vehicle. For details, see the subfolder fixposition_odometry_converter_ros1 (ROS 1) and fixposition_odometry_converter_ros2 (ROS 2). When building the ROS 1 version add a file named 'CATKIN_IGNORE' to the fixposition_odometry_converter_ros2 folder.

License

This project is licensed under the MIT License - see the LICENSE file for details

Name		Name	Last commit message	Last commit date
Latest commit History 138 Commits
.github/workflows		.github/workflows
fixposition_driver_lib		fixposition_driver_lib
fixposition_driver_ros1		fixposition_driver_ros1
fixposition_driver_ros2		fixposition_driver_ros2
fixposition_odometry_converter_ros1		fixposition_odometry_converter_ros1
fixposition_odometry_converter_ros2		fixposition_odometry_converter_ros2
test		test
.clang-format		.clang-format
.gitignore		.gitignore
CHANGELOG.md		CHANGELOG.md
LICENSE		LICENSE
README.md		README.md

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

Fixposition ROS Driver

How to use it

ROS 1

Installation

Launch the Driver

ROS 2

Installation

Launch the Driver

Output of the driver

Messages and TF tree

Vision-RTK2 Fusion

Vision-RTK2 GNSS Antenna Positions

Vision-RTK2 IMU data

Transforms

Explaination of frame ids

Input Wheelspeed through the driver

Code Documentation

Fixposition ASCII messages

Message structure

ODOMETRY message

LLH message

RAWIMU message

CORRIMU message

TF message

Fixposition Odometry Converter

License

About

Releases

Packages

Languages

License

Ascento-AG/fixposition_driver

Folders and files

Latest commit

History

Repository files navigation

Fixposition ROS Driver

How to use it

ROS 1

Installation

Launch the Driver

ROS 2

Installation

Launch the Driver

Output of the driver

Messages and TF tree

Vision-RTK2 Fusion

Vision-RTK2 GNSS Antenna Positions

Vision-RTK2 IMU data

Transforms

Explaination of frame ids

Input Wheelspeed through the driver

Code Documentation

Fixposition ASCII messages

Message structure

ODOMETRY message

LLH message

RAWIMU message

CORRIMU message

TF message

Fixposition Odometry Converter

License

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages