Evic

Evic is a USB programmer for devices based on the Joyetech Evic VTC Mini.

Supported devices

• eVic VTwo*
• Evic VTC Mini
• Cuboid Mini
• Cuboid
• eVic VTC Dual*
• eGrip II*
• eVic AIO*
• eVic VTwo mini*
• eVic Basic*
• iStick TC100W*
• ASTER*
• iStick Pico
• iStick Pico Mega*
• iPower*
• Presa TC75W*
• Vaporflask Classic*
• Vaporflask Lite*
• Vaporflask Stout*
• Reuleaux RX200*
• CENTURION*
• Reuleaux RX2/3*
• Reuleaux RX200S*

*Untested

Tested firmware versions

• Evic VTC Mini <=3.03
• Presa TC75W 1.02*
• iStick Pico 1.01
• Binaries built with evic-sdk

*Flashing Presa firmware to a VTC Mini requires changing the hardware version on some devices. Backup your data flash before flashing!

Installation

Install from source:

Using evic-usb requires cython-hidapi. You can install it using pip:

$ pip install hidapi

Building cython-hidapi requires libusb headers and cython. On Arch Linux they can be obtained from the repositories by installing packages libusb and cython. Debian based distributions will have packages libusb-1.0-0-dev and cython.

On Windows you will also need the correct compiler for your Python version. See this page for more information on setting up the compiler.

Building python-evic:

$ git clone git://github.com/Ban3/python-evic.git
$ cd python-evic
$ python setup.py install

Allowing non-root access to the device

The file udev/99-nuvoton-hid.rules contains an example set of rules for setting the device permissions to 0666. Copy the file to the directory /etc/udev/rules.d/ to use it.

Usage

See --help for more information on a given command.

evic-convert

evic-convert is a tool to encrypt/decrypt firmware images:

$ evic-convert in.bin -o out.bin

evic-usb

evic-usb is a tool for interfacing with the device through USB.

Dump device data flash to a file:

$ evic-usb dump-dataflash -o out.bin

Upload an encrypted firmware image to the device:

$ evic-usb upload firmware.bin

Upload an unencrypted firmware image to the device:

$ evic-usb upload -u firmware.bin

Upload a firmware image using data flash from a file:

$ evic-usb upload -d data.bin firmware.bin

Use --no-verify to disable verification for APROM or data flash. To disable both:

$ evic-usb upload --no-verify aprom --no-verify dataflash firmware.bin