Bump version

Docs/Configuration.md5

@@ -1 +1 @@
-67ec53cd72d25c7837661816ebad3cf1
+f76478ccad236e36b407501d184f7754

Docs/Configuration.tex

@@ -94,7 +94,7 @@
 
        \vspace{0.2in}
 
-       Reference Manual (0.9.4)
+       Reference Manual (0.9.5)
 
        \vspace{0.2in}
 

Docs/Differences/Differences.tex

@@ -1,7 +1,7 @@
 \documentclass[]{article}
 %DIF LATEXDIFF DIFFERENCE FILE
-%DIF DEL PreviousConfiguration.tex   Mon Jun 12 21:24:42 2023
-%DIF ADD ../Configuration.tex        Sun Jul 23 20:58:07 2023
+%DIF DEL PreviousConfiguration.tex   Sun Aug 13 12:38:11 2023
+%DIF ADD ../Configuration.tex        Sun Aug 13 12:38:11 2023
 
 \usepackage{lmodern}
 \usepackage{amssymb,amsmath}
@@ -154,7 +154,7 @@
 
        \vspace{0.2in}
 
-       Reference Manual (0.9\DIFdelbegin \DIFdel{.3}\DIFdelend \DIFaddbegin \DIFadd{.4}\DIFaddend )
+       Reference Manual (0.9\DIFdelbegin \DIFdel{.4}\DIFdelend \DIFaddbegin \DIFadd{.5}\DIFaddend )
 
        \vspace{0.2in}
 
@@ -3185,9 +3185,9 @@ \subsection{Introduction}\label{miscintro}
 \end{itemize} \medskip
 \end{itemize}
 
-\DIFaddbegin \subsubsection{\DIFadd{Boot Algorithm}}\label{bootalgorithm}
+\subsubsection{Boot Algorithm}\label{bootalgorithm}
 
-\DIFaddend The algorithm to determine boot options behaves as follows:
+The algorithm to determine boot options behaves as follows:
 
 \begin{enumerate}
 \tightlist
@@ -3207,16 +3207,15 @@ \subsection{Introduction}\label{miscintro}
   \item For disk device paths (not specifying a bootloader), execute ``bless'' (may return > 1 entry).
   \item For file device paths, check for presence on the file system directly.
   % Just kill all \EFI\APPLE\ paths.
-  \item Exclude entries if there is a \texttt{.contentVisibility} file \DIFdelbegin \DIFdel{near the bootloader or
-  inside the boot directory }\DIFdelend \DIFaddbegin \DIFadd{at a relevant location (see below)
-  }\DIFaddend with \texttt{Disabled} contents (ASCII) \DIFaddbegin \DIFadd{(and if the current }\texttt{\DIFadd{InstanceIentifier}} \DIFadd{matches an }\texttt{\DIFadd{Instance-List}}
-  \DIFadd{if present, see below)}\DIFaddend .
+  \item Exclude entries if there is a \texttt{.contentVisibility} file at a relevant location (see below)
+  with \texttt{Disabled} contents (ASCII) (and if the current \texttt{InstanceIentifier} matches an \texttt{Instance-List}
+  if present, see below).
   \item Mark device handle as \textit{used} in the list of partition handles if any.
   % Each partition handle will basically have a list of boot option entries for later quick lookup.
   \item Register the resulting entries as primary options and determine their types. \\
   The option will become auxiliary for some types (e.g. Apple HFS recovery)
-  or if its \texttt{.contentVisibility} file contains \texttt{Auxiliary} \DIFaddbegin \DIFadd{(and if the current
-  }\texttt{\DIFadd{InstanceIentifier}} \DIFadd{matches an }\texttt{\DIFadd{Instance-List}} \DIFadd{if present, see below)}\DIFaddend .
+  or if its \texttt{.contentVisibility} file contains \texttt{Auxiliary} (and if the current
+  \texttt{InstanceIentifier} matches an \texttt{Instance-List} if present, see below).
   \end{itemize}
 \item For each partition handle:
   \begin{itemize}
@@ -3235,51 +3234,46 @@ \subsection{Introduction}\label{miscintro}
 \item System entries, such as \texttt{Reset NVRAM}, are added as primary auxiliary options.
 \end{enumerate}
 
-\DIFaddbegin \DIFadd{A }\texttt{\DIFadd{.contentVisibility}} \DIFadd{file may be placed next to the bootloader (such as }\texttt{\DIFadd{boot.efi}}\DIFadd{),
+A \texttt{.contentVisibility} file may be placed next to the bootloader (such as \texttt{boot.efi}),
 or in the boot folder (for DMG folder based boot items). Example locations, as seen from within macOS, are:
-}\begin{itemize}
+\begin{itemize}
 \tightlist
-\item \texttt{\DIFadd{/System/Volumes/Preboot/\{GUID\}/System/Library/CoreServices/.contentVisibility}}
-\item \texttt{\DIFadd{/Volumes/\{ESP\}/EFI/BOOT/.contentVisibility}}
+\item \texttt{/System/Volumes/Preboot/\{GUID\}/System/Library/CoreServices/.contentVisibility}
+\item \texttt{/Volumes/\{ESP\}/EFI/BOOT/.contentVisibility}
 \end{itemize}
-\DIFadd{In addition a }\texttt{\DIFadd{.contentVisibility}} \DIFadd{file may be placed in the instance-specific (for macOS) or absolute
+In addition a \texttt{.contentVisibility} file may be placed in the instance-specific (for macOS) or absolute
 root folders related to a boot entry, for example:
-}\begin{itemize}
+\begin{itemize}
 \tightlist
-\item \texttt{\DIFadd{/System/Volumes/Preboot/\{GUID\}/.contentVisibility}}
-\item \texttt{\DIFadd{/System/Volumes/Preboot/.contentVisibility}}
-\item \texttt{\DIFadd{/Volumes/\{ESP\}/.contentVisibility}} \DIFadd{(}\emph{\DIFadd{not recommended}}\DIFadd{)
-}\end{itemize}
-\DIFadd{These root folder locations are supported specifically for macOS, because non-Apple files next to the Apple bootloader
-are removed by macOS updates. It is supported but not recommended to place a }\texttt{\DIFadd{.contentVisibility}} \DIFadd{file in a
+\item \texttt{/System/Volumes/Preboot/\{GUID\}/.contentVisibility}
+\item \texttt{/System/Volumes/Preboot/.contentVisibility}
+\item \texttt{/Volumes/\{ESP\}/.contentVisibility} (\emph{not recommended})
+\end{itemize}
+These root folder locations are supported specifically for macOS, because non-Apple files next to the Apple bootloader
+are removed by macOS updates. It is supported but not recommended to place a \texttt{.contentVisibility} file in a
 non-macOS root location (such as the last location shown above), because it will hide all entries on the drive.
-}
 
-\DIFadd{The }\texttt{\DIFadd{.contentVisibility}} \DIFadd{file, when present, may optionally target only specific instances
-of OpenCore. Its contents are }\texttt{[\DIFadd{\{Instance-List\}:}]\DIFadd{(Disabled|Auxiliary)}}\DIFadd{.
-If a colon (}\texttt{\DIFadd{:}}\DIFadd{) is present, the preceding }\texttt{\DIFadd{Instance-List}} \DIFadd{it is a comma separated
-list of }\texttt{\DIFadd{InstanceIdentifier}} \DIFadd{values (example: }\texttt{\DIFadd{OCA,OCB:Disabled}}\DIFadd{).
+The \texttt{.contentVisibility} file, when present, may optionally target only specific instances
+of OpenCore. Its contents are \texttt{[\{Instance-List\}:](Disabled|Auxiliary)}.
+If a colon (\texttt{:}) is present, the preceding \texttt{Instance-List} it is a comma separated
+list of \texttt{InstanceIdentifier} values (example: \texttt{OCA,OCB:Disabled}).
 When this list is present, the specified visibility is only applied if the
-}\texttt{\DIFadd{InstanceIdentifier}} \DIFadd{of the current instance of OpenCore is present in the list.
+\texttt{InstanceIdentifier} of the current instance of OpenCore is present in the list.
 When the list is not present, the specified visibility is applied for all instances of OpenCore.
-}
 
-\emph{\DIFadd{Note 1}}\DIFadd{: For any instance of OpenCore with no }\texttt{\DIFadd{InstanceIdentifier}} \DIFadd{value, the specified visibility
-from a }\texttt{\DIFadd{.contentVisibility}} \DIFadd{file with an }\texttt{\DIFadd{Instance-List}} \DIFadd{will never be applied.
-}
+\emph{Note 1}: For any instance of OpenCore with no \texttt{InstanceIdentifier} value, the specified visibility
+from a \texttt{.contentVisibility} file with an \texttt{Instance-List} will never be applied.
 
-\emph{\DIFadd{Note 2}}\DIFadd{: Visibilities with a visibility list will be treated as invalid, and so ignored, in earlier
+\emph{Note 2}: Visibilities with a visibility list will be treated as invalid, and so ignored, in earlier
 versions of OpenCore - which may be useful when comparing behaviour of older and newer versions.
-}
 
-\emph{\DIFadd{Note 3}}\DIFadd{: Avoid extraneous spaces in the }\texttt{\DIFadd{.contentVisibility}} \DIFadd{file: these will not be treated as
+\emph{Note 3}: Avoid extraneous spaces in the \texttt{.contentVisibility} file: these will not be treated as
 whitespace, but as part of the adjacent token.
-}
 
-\DIFaddend The display order of the boot options in the OpenCore picker and the boot process
+The display order of the boot options in the OpenCore picker and the boot process
 are determined separately from the scanning algorithm.
 
-The display order \DIFaddbegin \DIFadd{is }\DIFaddend as follows:
+The display order is as follows:
 
 \begin{itemize}
 \tightlist
@@ -3500,19 +3494,17 @@ \subsection{Boot Properties}\label{miscbootprops}
 
 
 \item
-  \DIFaddbegin \texttt{\DIFadd{InstanceIdentifier}}\\
-  \textbf{\DIFadd{Type}}\DIFadd{: }\texttt{\DIFadd{plist\ string}}\\
-  \textbf{\DIFadd{Failsafe}}\DIFadd{: Empty}\\
-  \textbf{\DIFadd{Description}}\DIFadd{: An optional identifier for the current instance of OpenCore.
-}
+  \texttt{InstanceIdentifier}\\
+  \textbf{Type}: \texttt{plist\ string}\\
+  \textbf{Failsafe}: Empty\\
+  \textbf{Description}: An optional identifier for the current instance of OpenCore.
 
-  \DIFadd{This should typically be a short alphanumeric string. The current use of this value is
-  to optionally target }\texttt{\DIFadd{.contentVisibility}} \DIFadd{files to specific instances of OpenCore,
-  as explained in the }\hyperref[bootalgorithm]{Boot Algorithm} \DIFadd{section.
-}
+  This should typically be a short alphanumeric string. The current use of this value is
+  to optionally target \texttt{.contentVisibility} files to specific instances of OpenCore,
+  as explained in the \hyperref[bootalgorithm]{Boot Algorithm} section.
 
 \item
-  \DIFaddend \texttt{LauncherOption}\\
+  \texttt{LauncherOption}\\
   \textbf{Type}: \texttt{plist\ string}\\
   \textbf{Failsafe}: \texttt{Disabled}\\
   \textbf{Description}: Register the launcher option in the firmware preferences for persistence.
@@ -8428,7 +8420,7 @@ \subsection{Output Properties}\label{uefioutputprops}
 
   \emph{Note}: This option depends on the \href{https://github.com/acidanthera/OpenCorePkg/blob/master/Include/Acidanthera/Protocol/OcForceResolution.h}{\texttt{OC\_FORCE\_RESOLUTION\_PROTOCOL}}
   protocol being present. This protocol is currently only supported by \texttt{OpenDuetPkg}. The
-  \texttt{OpenDuetPkg} implementation currently only supports Intel iGPUs \DIFaddbegin \DIFadd{and certain ATI GPUs}\DIFaddend .
+  \texttt{OpenDuetPkg} implementation currently only supports Intel iGPUs and certain ATI GPUs.
 
 \item
   \texttt{ClearScreenOnModeSwitch}\\

Docs/Differences/PreviousConfiguration.tex

@@ -94,7 +94,7 @@
 
        \vspace{0.2in}
 
-       Reference Manual (0.9.3)
+       Reference Manual (0.9.4)
 
        \vspace{0.2in}
 
@@ -3125,6 +3125,8 @@ \subsection{Introduction}\label{miscintro}
 \end{itemize} \medskip
 \end{itemize}
 
+\subsubsection{Boot Algorithm}\label{bootalgorithm}
+
 The algorithm to determine boot options behaves as follows:
 
 \begin{enumerate}
@@ -3145,13 +3147,15 @@ \subsection{Introduction}\label{miscintro}
   \item For disk device paths (not specifying a bootloader), execute ``bless'' (may return > 1 entry).
   \item For file device paths, check for presence on the file system directly.
   % Just kill all \EFI\APPLE\ paths.
-  \item Exclude entries if there is a \texttt{.contentVisibility} file near the bootloader or
-  inside the boot directory with \texttt{Disabled} contents (ASCII).
+  \item Exclude entries if there is a \texttt{.contentVisibility} file at a relevant location (see below)
+  with \texttt{Disabled} contents (ASCII) (and if the current \texttt{InstanceIentifier} matches an \texttt{Instance-List}
+  if present, see below).
   \item Mark device handle as \textit{used} in the list of partition handles if any.
   % Each partition handle will basically have a list of boot option entries for later quick lookup.
   \item Register the resulting entries as primary options and determine their types. \\
   The option will become auxiliary for some types (e.g. Apple HFS recovery)
-  or if its \texttt{.contentVisibility} file contains \texttt{Auxiliary}.
+  or if its \texttt{.contentVisibility} file contains \texttt{Auxiliary} (and if the current
+  \texttt{InstanceIentifier} matches an \texttt{Instance-List} if present, see below).
   \end{itemize}
 \item For each partition handle:
   \begin{itemize}
@@ -3165,14 +3169,51 @@ \subsection{Introduction}\label{miscintro}
   \item Lookup alternate entries by ``bless'' recovery option list retrieval and predefined paths.
   \item Register the resulting entries as alternate auxiliary options and determine their types if found.
   \end{itemize}
-\item Custom entries and tools, except such pre-constructed previously, are added as primary options without any checks with respect to \texttt{Auxiliary}.
+\item Custom entries and tools, except such pre-constructed previously, are added as primary options
+without any checks with respect to \texttt{Auxiliary}.
 \item System entries, such as \texttt{Reset NVRAM}, are added as primary auxiliary options.
 \end{enumerate}
 
+A \texttt{.contentVisibility} file may be placed next to the bootloader (such as \texttt{boot.efi}),
+or in the boot folder (for DMG folder based boot items). Example locations, as seen from within macOS, are:
+\begin{itemize}
+\tightlist
+\item \texttt{/System/Volumes/Preboot/\{GUID\}/System/Library/CoreServices/.contentVisibility}
+\item \texttt{/Volumes/\{ESP\}/EFI/BOOT/.contentVisibility}
+\end{itemize}
+In addition a \texttt{.contentVisibility} file may be placed in the instance-specific (for macOS) or absolute
+root folders related to a boot entry, for example:
+\begin{itemize}
+\tightlist
+\item \texttt{/System/Volumes/Preboot/\{GUID\}/.contentVisibility}
+\item \texttt{/System/Volumes/Preboot/.contentVisibility}
+\item \texttt{/Volumes/\{ESP\}/.contentVisibility} (\emph{not recommended})
+\end{itemize}
+These root folder locations are supported specifically for macOS, because non-Apple files next to the Apple bootloader
+are removed by macOS updates. It is supported but not recommended to place a \texttt{.contentVisibility} file in a
+non-macOS root location (such as the last location shown above), because it will hide all entries on the drive.
+
+The \texttt{.contentVisibility} file, when present, may optionally target only specific instances
+of OpenCore. Its contents are \texttt{[\{Instance-List\}:](Disabled|Auxiliary)}.
+If a colon (\texttt{:}) is present, the preceding \texttt{Instance-List} it is a comma separated
+list of \texttt{InstanceIdentifier} values (example: \texttt{OCA,OCB:Disabled}).
+When this list is present, the specified visibility is only applied if the
+\texttt{InstanceIdentifier} of the current instance of OpenCore is present in the list.
+When the list is not present, the specified visibility is applied for all instances of OpenCore.
+
+\emph{Note 1}: For any instance of OpenCore with no \texttt{InstanceIdentifier} value, the specified visibility
+from a \texttt{.contentVisibility} file with an \texttt{Instance-List} will never be applied.
+
+\emph{Note 2}: Visibilities with a visibility list will be treated as invalid, and so ignored, in earlier
+versions of OpenCore - which may be useful when comparing behaviour of older and newer versions.
+
+\emph{Note 3}: Avoid extraneous spaces in the \texttt{.contentVisibility} file: these will not be treated as
+whitespace, but as part of the adjacent token.
+
 The display order of the boot options in the OpenCore picker and the boot process
 are determined separately from the scanning algorithm.
 
-The display order as follows:
+The display order is as follows:
 
 \begin{itemize}
 \tightlist
@@ -3391,6 +3432,17 @@ \subsection{Boot Properties}\label{miscbootprops}
   To display all entries, the picker menu can be reloaded into ``Extended Mode'' by pressing the
   \texttt{Spacebar} key. Hiding auxiliary entries may increase boot performance on multi-disk systems.
 
+
+\item
+  \texttt{InstanceIdentifier}\\
+  \textbf{Type}: \texttt{plist\ string}\\
+  \textbf{Failsafe}: Empty\\
+  \textbf{Description}: An optional identifier for the current instance of OpenCore.
+
+  This should typically be a short alphanumeric string. The current use of this value is
+  to optionally target \texttt{.contentVisibility} files to specific instances of OpenCore,
+  as explained in the \hyperref[bootalgorithm]{Boot Algorithm} section.
+
 \item
   \texttt{LauncherOption}\\
   \textbf{Type}: \texttt{plist\ string}\\
@@ -8308,7 +8360,7 @@ \subsection{Output Properties}\label{uefioutputprops}
 
   \emph{Note}: This option depends on the \href{https://github.com/acidanthera/OpenCorePkg/blob/master/Include/Acidanthera/Protocol/OcForceResolution.h}{\texttt{OC\_FORCE\_RESOLUTION\_PROTOCOL}}
   protocol being present. This protocol is currently only supported by \texttt{OpenDuetPkg}. The
-  \texttt{OpenDuetPkg} implementation currently only supports Intel iGPUs.
+  \texttt{OpenDuetPkg} implementation currently only supports Intel iGPUs and certain ATI GPUs.
 
 \item
   \texttt{ClearScreenOnModeSwitch}\\

Include/Acidanthera/Library/OcMainLib.h

@@ -30,7 +30,7 @@
   OpenCore version reported to log and NVRAM.
   OPEN_CORE_VERSION must follow X.Y.Z format, where X.Y.Z are single digits.
 **/
-#define OPEN_CORE_VERSION  "0.9.4"
+#define OPEN_CORE_VERSION  "0.9.5"
 
 /**
   OpenCore build type reported to log and NVRAM.