NetfilterQueue

NetfilterQueue provides access to packets matched by an iptables rule in Linux. Packets so matched can be accepted, dropped, altered, or given a mark.

Libnetfilter_queue (the netfilter library, not this module) is part of the Netfilter project.

Example

The following script prints a short description of each packet before accepting it.

from netfilterqueue import NetfilterQueue

def print_and_accept(pkt):
    print(pkt)
    pkt.accept()

nfqueue = NetfilterQueue()
nfqueue.bind(1, print_and_accept)
try:
    nfqueue.run()
except KeyboardInterrupt:
    print('')

nfqueue.unbind()

You can also make your own socket so that it can be used with gevent, for example.

from netfilterqueue import NetfilterQueue
import socket

def print_and_accept(pkt):
    print(pkt)
    pkt.accept()

nfqueue = NetfilterQueue()
nfqueue.bind(1, print_and_accept)
s = socket.fromfd(nfqueue.get_fd(), socket.AF_UNIX, socket.SOCK_STREAM)
try:
    nfqueue.run_socket(s)
except KeyboardInterrupt:
    print('')

s.close()
nfqueue.unbind()

To send packets destined for your LAN to the script, type something like:

iptables -I INPUT -d 192.168.0.0/24 -j NFQUEUE --queue-num 1

Installation

NetfilterQueue is a C extention module that links against libnetfilter_queue. Before installing, ensure you have:

1. A C compiler
2. Python development files
3. Libnetfilter_queue development files and associated dependencies

On Debian or Ubuntu, install these files with:

apt-get install build-essential python-dev libnetfilter-queue-dev

From PyPI

To install from PyPI by pip:

pip install NetfilterQueue

From source

To install from source:

git clone [email protected]:kti/python-netfilterqueue.git
cd python-netfilterqueue
python setup.py install

If Cython is installed, Distutils will use it to regenerate the .c source from the .pyx. It will then compile the .c into a .so.

API

NetfilterQueue.COPY_NONE

NetfilterQueue.COPY_META

NetfilterQueue.COPY_PACKET

These constants specify how much of the packet should be given to the script- nothing, metadata, or the whole packet.

NetfilterQueue objects

A NetfilterQueue object represents a single queue. Configure your queue with a call to bind, then start receiving packets with a call to run.

QueueHandler.bind(queue_num, callback[, max_len[, mode[, range, [sock_len]]]])

Create and bind to the queue. queue_num must match the number in your iptables rule. callback is a function or method that takes one argument, a Packet object (see below). max_len sets the largest number of packets that can be in the queue; new packets are dropped if the size of the queue reaches this number. mode determines how much of the packet data is provided to your script. Use the constants above. range defines how many bytes of the packet you want to get. For example, if you only want the source and destination IPs of a IPv4 packet, range could be 20. sock_len sets the receive socket buffer size.

QueueHandler.unbind()

Remove the queue. Packets matched by your iptables rule will be dropped.

QueueHandler.get_fd()

Get the file descriptor of the queue handler.

QueueHandler.run([block])

Send packets to your callback. By default, this method blocks. Set block=False to let your thread continue. You can get the file descriptor of the socket with the get_fd method.

QueueHandler.run_socket(socket)

Send packets to your callback, but use the supplied socket instead of recv, so that, for example, gevent can monkeypatch it. You can make a socket with socket.fromfd(nfqueue.get_fd(), socket.AF_UNIX, socket.SOCK_STREAM) and optionally make it non-blocking with socket.setblocking(False).

Packet objects

Objects of this type are passed to your callback.

Packet.get_payload()

Return the packet's payload as a string (Python 2) or bytes (Python 3).

Packet.set_payload(payload)

Set the packet payload. payload is a bytes.

Packet.get_payload_len()

Return the size of the payload.

Packet.set_mark(mark)

Give the packet a kernel mark. mark is a 32-bit number.

Packet.get_mark()

Get the mark already on the packet.

Packet.get_hw()

Return the hardware address as a Python string.

Packet.accept()

Accept the packet.

Packet.drop()

Drop the packet.

Packet.repeat()

Iterate the same cycle once more.

Callback objects

Your callback can be function or a method and must accept one argument, a Packet object. You must call either Packet.accept() or Packet.drop() before returning.

callback(packet) or callback(self, packet)

Handle a single packet from the queue. You must call either packet.accept() or packet.drop().

Usage

To send packets to the queue:

iptables -I <table or chain> <match specification> -j NFQUEUE --queue-num <queue number>

For example:

iptables -I INPUT -d 192.168.0.0/24 -j NFQUEUE --queue-num 1

The only special part of the rule is the target. Rules can have any match and can be added to any table or chain.

Valid queue numbers are integers from 0 to 65,535 inclusive.

To view libnetfilter_queue stats, refer to /proc/net/netfilter/nfnetlink_queue:

cat /proc/net/netfilter/nfnetlink_queue
1  31621     0 2  4016     0     0        2  1

The fields are:

1. Queue ID
2. Bound process ID
3. Number of currently queued packets
4. Copy mode
5. Copy size
6. Number of packets dropped due to reaching max queue size
7. Number of packets dropped due to netlink socket failure
8. Total number of packets sent to queue
9. Something for libnetfilter_queue's internal use

Limitations

• Compiled with a 4096-byte buffer for packets, so it probably won't work on loopback or Ethernet with jumbo packets. If this is a problem, either lower MTU on your loopback, disable jumbo packets, or get Cython, change DEF BufferSize = 4096 in netfilterqueue.pyx, and rebuild.

• Full libnetfilter_queue API is not yet implemented:

  • Omits methods for getting information about the interface a packet has arrived on or is leaving on
  • Probably other stuff is omitted too

Source

https://github.com/kti/python-netfilterqueue

License

Copyright (c) 2011, Kerkhoff Technologies, Inc.

MIT licensed