bioinformatics-one-liners

my collection of bioinformatics one liners that is useful in my day-to-day work

I came across the bioinformatics one-liners on the biostar forum and gathered them here.

I also added some of my own tricks

05/21/2015.

loop through contig files and change from multi line to one line

#fix file with multiple line

for file in *.fasta;
	do;
	echo $file
	grep ">" $file -v > temp_file.fasta
	echo ">""$file"  > first_line.fasta
	cat temp_file.fasta >> first_line.fasta
	mv first_line.fasta $file
done;

get the sequences length distribution form a fastq file using awk

zcat file.fastq.gz | awk 'NR%4 == 2 {lengths[length($0)]++} END {for (l in lengths) {print l, lengths[l]}}'  

add barcode to 10x single cell R1 read

cat test.fq | awk 'NR%4 == 2 {$0="xxx"$0}{print}'
@D00365:1187:HMM2FBCX2:1:1103:1258:2132 1:N:0:CGTGCAGA
xxxTATTACCAGATGAGAGCATGGTTAGG
+
DDDDDIIIIIIIHIIIIIIIIIIIII
@D00365:1187:HMM2FBCX2:1:1103:1472:2136 1:N:0:CGTGCAGA
xxxAACCATGAGTGTCCCGCTGGCATCGC
+
DDDADGHHIIHIIGIHHHFCHHIIII
@D00365:1187:HMM2FBCX2:1:1103:1822:2139 1:N:0:CGTGCAGA
xxxGTGCATATCATGTAGCGTATTATACT
+
DDDDDIIIIIIIIIIIIIIIIIIIII
@D00365:1187:HMM2FBCX2:1:1103:1943:2145 1:N:0:CGTGCAGA
xxxGATTCAGTCTCCAACCTCTCCTTTGT
+
DDDDDHIIIIIIIIIIHIIIIHIIII
@D00365:1187:HMM2FBCX2:1:1103:1917:2147 1:N:0:CGTGCAGA
xxxCCTTCGACAAGTTGTCAGGTGCGGTC
+
DDDDDHIIIIIIIIIIIIIIGIIHHH

Reverse complement a sequence (I use that a lot when I need to design primers)

echo 'ATTGCTATGCTNNNT' | rev | tr 'ACTG' 'TGAC'

split a multifasta file into single ones with csplit:

csplit -z -q -n 4 -f sequence_ sequences.fasta /\>/ {*}  

Split a multi-FASTA file into individual FASTA files by awk

awk '/^>/{s=++d".fa"} {print > s}' multi.fa

linearize multiline fasta

cat file.fasta | awk '/^>/{if(N>0) printf("\n"); ++N; printf("%s\t",$0);next;} {printf("%s",$0);}END{printf("\n");}'
awk 'BEGIN{RS=">"}NR>1{sub("\n","\t"); gsub("\n",""); print RS$0}' file.fa

fastq2fasta

zcat file.fastq.gz | paste - - - - | perl -ane 'print ">$F[0]\n$F[2]\n";' | gzip -c > file.fasta.gz

bam2bed

samtools view file.bam | perl -F'\t' -ane '$strand=($F[1]&16)?"-":"+";$length=1;$tmp=$F[5];$tmp =~ s/(\d+)[MD]/$length+=$1/eg;print "$F[2]\t$F[3]\t".($F[3]+$length)."\t$F[0]\t0\t$strand\n";' > file.bed

bam2wig

samtools mpileup -BQ0 file.sorted.bam | perl -pe '($c, $start, undef, $depth) = split;if ($c ne $lastC || $start != $lastStart+1) {print "fixedStep chrom=$c start=$start step=1 span=1\n";}$_ = $depth."\n";($lastC, $lastStart) = ($c, $start);' | gzip -c > file.wig.gz

Number of reads in a fastq file

cat file.fq | echo $((`wc -l`/4))

Single line fasta file to multi-line fasta of 60 characteres each line

awk -v FS= '/^>/{print;next}{for (i=0;i<=NF/60;i++) {for (j=1;j<=60;j++) printf "%s", $(i*60 +j); print ""}}' file

fold -w 60 file

Sequence length of every entry in a multifasta file

awk '/^>/ {if (seqlen){print seqlen}; print ;seqlen=0;next; } { seqlen = seqlen +length($0)}END{print seqlen}' file.fa

Reproducible subsampling of a FASTQ file. srand() is the seed for the random number generator - keeps the subsampling the same when the script is run multiple times. 0.01 is the % of reads to output.

cat file.fq | paste - - - - | awk 'BEGIN{srand(1234)}{if(rand() < 0.01) print $0}' | tr '\t' '\n' > out.fq

or look at the Hengli's Seqtk

Deinterleaving a FASTQ:

cat file.fq | paste - - - - - - - - | tee >(cut -f1-4 | tr '\t'  
'\n' > out1.fq) | cut -f5-8 | tr '\t' '\n' > out2.fq

Using mpileup for a whole genome can take forever. So, handling each chromosome separately and parallely running them on several cores will speed up your pipeline. Using xargs you can easily realize it.

Example usage of xargs (-P is the number of parallel processes started - don't use more than the number of cores you have available):

samtools view -H yourFile.bam | grep "\@SQ" | sed 's/^.*SN://g' | cut -f 1 | xargs -I {} -n 1 -P 24 sh -c "samtools mpileup -BQ0 -d 100000 -uf yourGenome.fa -r {} yourFile.bam | bcftools view -vcg - > tmp.{}.vcf"

To merge the results afterwards, you might want to do something like this:

samtools view -H yourFile.bam | grep "\@SQ" | sed 's/^.*SN://g' | cut -f 1 | perl -ane 'system("cat tmp.$F[0].bcf >> yourFile.vcf");'

split large file by id/label/column

awk '{print >> $1; close($1)}' input_file

split a bed file by chromosome:

cat nexterarapidcapture_exome_targetedregions_v1.2.bed | sort -k1,1 -k2,2n | sed 's/^chr//' | awk '{close(f);f=$1}{print > f".bed"}'

#or
awk '{print $0 >> $1".bed"}' example.bed

sort vcf file with header

cat my.vcf | awk '$0~"^#" { print $0; next } { print $0 | "sort -k1,1V -k2,2n" }'

Rename a file, bash string manipulation

for file in *gz
do zcat $file > ${file/bed.gz/bed}

gnu sed print invisible characters

cat my_file | sed -n 'l'
cat -A

exit a dead ssh session

~.

copy large files, copy the from_dir directory inside the to_dir directory

rsync -av from_dir  to_dir

## copy every file inside the frm_dir to to_dir
rsync -av from_dir/ to_dir

##re-copy the files avoiding completed ones:

rsync -avhP /from/dir /to/dir

make directory using the current date

mkdir $(date +%F)

all the folders' size in the current folder (GNU du)

du -h --max-depth=1

this one is a bit different, try it and see the difference

du -ch

the total size of current directory

du -sh .

disk usage

df -h

the column names of the file, install csvkit https://csvkit.readthedocs.org/en/0.9.1/

csvcut -n

open top with human readable size in Mb, Gb. install htop for better visualization

top -M

how many memeory are used in Gb

free -mg

print out unique rows based on the first and second column

awk '!a[$1,$2]++' input_file

sort -u -k1,2 file It will sort based on unique first and second column

do not wrap the lines using less

less -S

pretty output

fold -w 60
cat file.txt | column -t | less -S

pass tab as delimiter http://unix.stackexchange.com/questions/46910/is-it-a-bug-for-join-with-t-t

-t $'\t'

awk with the first line printed always

awk ' NR ==1 || ($10 > 1 && $11 > 0 && $18 > 0.001)' input_file

delete blank lines with sed

sed /^$/d

delete the last line

sed $d

awk to join files based on several columns

my github repo

### select lines from a file based on columns in another file
## http://unix.stackexchange.com/questions/134829/compare-two-columns-of-different-files-and-print-if-it-matches
awk -F"\t" 'NR==FNR{a[$1$2$3]++;next};a[$1$2$3] > 0' file2 file1 

Finally learned about the !$ in unix: take the last thing (word) from the previous command.
echo hello, world; echo !$ gives 'world'

Create a script of the last executed command:
echo "!!" > foo.sh

Reuse all parameter of the previous command line:
!*

find bam in current folder (search recursively) and copy it to a new directory using 5 CPUs
find . -name "*bam" | xargs -P5 -I{} rsync -av {} dest_dir

ls -X will group files by extension.

loop through all the chromosomes

for i in {1..22} X Y 
do
  echo $i
done

for i in in {01..22} will expand to 01 02 ...

change every other newline to tab:

paste is used to concatenate corresponding lines from files: paste file1 file2 file3 .... If one of the "file" arguments is "-", then lines are read from standard input. If there are 2 "-" arguments, then paste takes 2 lines from stdin. And so on.

cat test.txt  
0    ATTTTATTNGAAATAGTAGTGGG
0    CTCCCAAAATACTAAAATTATAA
1    TTTTAGTTATTTANGAGGTTGAG
1    CNTAATCTTAACTCACTACAACC
2    TTATAATTTTAGTATTTTGGGAG
2    CATATTAACCAAACTAATCTTAA
3    GGTTAATATGGTGAAATTTAAT
3    ACCTCAACCTCNTAAATAACTAA

cat test.txt| paste - -                               
0    ATTTTATTNGAAATAGTAGTGGG    0    CTCCCAAAATACTAAAATTATAA
1    TTTTAGTTATTTANGAGGTTGAG    1    CNTAATCTTAACTCACTACAACC
2    TTATAATTTTAGTATTTTGGGAG    2    CATATTAACCAAACTAATCTTAA
3    GGTTAATATGGTGAAATTTAAT     3    ACCTCAACCTCNTAAATAACTAA

ORS: output record seperator in awk var=condition?condition_if_true:condition_if_false is the ternary operator.

cat test.txt| awk 'ORS=NR%2?"\t":"\n"'          

0    ATTTTATTNGAAATAGTAGTGGG    0    CTCCCAAAATACTAAAATTATAA
1    TTTTAGTTATTTANGAGGTTGAG    1    CNTAATCTTAACTCACTACAACC
2    TTATAATTTTAGTATTTTGGGAG    2    CATATTAACCAAACTAATCTTAA
3    GGTTAATATGGTGAAATTTAAT     3    ACCTCAACCTCNTAAATAACTAA

awk

We can also use the concept of a conditional operator in print statement of the form print CONDITION ? PRINT_IF_TRUE_TEXT : PRINT_IF_FALSE_TEXT. For example, in the code below, we identify sequences with lengths > 14:

cat data/test.tsv
blah_C1	ACTGTCTGTCACTGTGTTGTGATGTTGTGTGTG
blah_C2	ACTTTATATATT
blah_C3	ACTTATATATATATA
blah_C4	ACTTATATATATATA
blah_C5	ACTTTATATATT	

awk '{print (length($2)>14) ? $0">14" : $0"<=14";}' data/test.tsv
blah_C1	ACTGTCTGTCACTGTGTTGTGATGTTGTGTGTG>14
blah_C2	ACTTTATATATT<=14
blah_C3	ACTTATATATATATA>14
blah_C4	ACTTATATATATATA>14
blah_C5	ACTTTATATATT<=14

awk 'NR==3{print "";next}{printf $1"\t"}{print $1}' data/test.tsv
blah_C1	blah_C1
blah_C2	blah_C2

blah_C4	blah_C4
blah_C5	blah_C5

You can also use getline to load the contents of another file in addition to the one you are reading, for example, in the statement given below, the while loop will load each line from test.tsv into k until no more lines are to be read:

awk 'BEGIN{while((getline k <"data/test.tsv")>0) print "BEGIN:"k}{print}' data/test.tsv
BEGIN:blah_C1	ACTGTCTGTCACTGTGTTGTGATGTTGTGTGTG
BEGIN:blah_C2	ACTTTATATATT
BEGIN:blah_C3	ACTTATATATATATA
BEGIN:blah_C4	ACTTATATATATATA
BEGIN:blah_C5	ACTTTATATATT
blah_C1	ACTGTCTGTCACTGTGTTGTGATGTTGTGTGTG
blah_C2	ACTTTATATATT
blah_C3	ACTTATATATATATA
blah_C4	ACTTATATATATATA
blah_C5	ACTTTATATATT

merge multiple fasta sequences in two files into a single file line by line

see post

linearize.awk:

/^>/ {printf("%s%s\t",(N>0?"\n":""),$0);N++;next;} {printf("%s",$0);} END {printf("\n");}

paste <(awk -f linearize.awk file1.fa ) <(awk -f linearize.awk file2.fa  )| tr "\t" "\n"

grep fastq reads containing a pattern but maintain the fastq format

grep -A 2 -B 1 'AAGTTGATAACGGACTAGCCTTATTTT' file.fq | sed '/^--$/d' > out.fq

# or
zcat reads.fq.gz \
| paste - - - - \
| awk -v FS="\t" -v OFS="\n" '$2 ~ "AAGTTGATAACGGACTAGCCTTATTTT" {print $1, $2, $3, $4}' \
| gzip > filtered.fq.gz

count how many columns of a tsv files:

cat file.tsv | head -1 | tr "\t" "\n" | wc -l  
csvcut -n -t  file.tsv (from csvkit)
awk '{print NF; exit}' file.tsv
awk -F "\t" 'NR == 1 {print NF}' file.tsv

combine info to the fasta header

from biostar post

cat myfasta.txt 
>Blap_contig79
MSTDVDAKTRSKERASIAAFYVGRNIFVTGGTGFLGKVLIEKLLRSCPDVGEIFILMRPKAGLSI
>Bluc_contig23663
MSTNVDAKARSKERASIAAFYVGRNIFVTGGTGFLGKVLIEKLLRSCPDVGEIFILMRPKAGLSI
>Blap_contig7988
MSTDVDAKTRSKERASIAAFYVGRNIFVTGGTGFLGKVLIEKLLRSCPDVGEIFILMRPKAGLSI
>Bluc_contig1223663
MSTNVDAKARSKERASIAAFYVGRNIFVTGGTGFLGKVLIEKLLRSCPDVGEIFILMRPKAGLSI

cat my_info.txt 
info1
info2
info3
info4

paste <(cat my_info.txt) <(cat myfasta.txt| paste - - | cut -c2-) | awk '{printf(">%s_%s\n%s\n",$1,$2,$3);}'
>info1_Blap_contig79
MSTDVDAKTRSKERASIAAFYVGRNIFVTGGTGFLGKVLIEKLLRSCPDVGEIFILMRPKAGLSI
>info2_Bluc_contig23663
MSTNVDAKARSKERASIAAFYVGRNIFVTGGTGFLGKVLIEKLLRSCPDVGEIFILMRPKAGLSI
>info3_Blap_contig7988
MSTDVDAKTRSKERASIAAFYVGRNIFVTGGTGFLGKVLIEKLLRSCPDVGEIFILMRPKAGLSI
>info4_Bluc_contig1223663
MSTNVDAKARSKERASIAAFYVGRNIFVTGGTGFLGKVLIEKLLRSCPDVGEIFILMRPKAGLSI

count how many columns in a tsv file

cat file.tsv | head -1 | tr "\t" "\n" | wc -l  

##(from csvkit)
csvcut -n -t file.

## emulate csvcut -n -t
less files.tsv | head -1| tr "\t" "\n" | nl

awk -F "\t" 'NR == 1 {print NF}' file.tsv
awk '{print NF; exit}'

change fasta header

see https://www.biostars.org/p/53212/

The fasta header is like >7 dna:chromosome chromosome:GRCh37:7:1:159138663:1 convert to >7:

cat Homo_sapiens_assembly19.fasta | gawk '/^>/ { b=gensub(" dna:.+", "", "g", $0); print b; next} {print}' > Homo_sapiens_assembly19_reheader.fasta

mkdir and cd into that dir shortcut

mkdir blah && cd $_

cut out columns based on column names in another file

http://crazyhottommy.blogspot.com/2016/10/cutting-out-500-columns-from-26g-file.html

#! /bin/bash

set -e
set -u
set -o pipefail

#### Author: Ming Tang (Tommy)
#### Date 09/29/2016
#### I got the idea from this stackOverflow post http://stackoverflow.com/questions/11098189/awk-extract-columns-from-file-based-on-header-selected-from-2nd-file

# show help
show_help(){
cat << EOF
  This is a wrapper extracting columns of a (big) dataframe based on a list of column names in another
  file. The column names must be one per line. The output will be stdout. For small files < 2G, one 
  can load it into R and do it easily, but when the file is big > 10G. R is quite cubersome. 
  Using unix commands on the other hand is better because files do not have to be loaded into memory at once.
  e.g. subset a 26G size file for 700 columns takes around 30 mins. Memory footage is very low ~4MB.

  usage: ${0##*/} -f < a dataframe  > -c < colNames> -d <delimiter of the file>
        -h display this help and exit.
		-f the file you want to extract columns from. must contain a header with column names.
		-c a file with the one column name per line.
		-d delimiter of the dataframe: , or \t. default is tab.  
		
		e.g. 
		
		for tsv file:
			${0##*/} -f mydata.tsv -c colnames.txt -d $'\t' or simply ommit the -d, default is tab.
		
		for csv file: Note you have to specify -d , if your file is csv, otherwise all columns will be cut out.
			${0##*/} -f mydata.csv -c colnames.txt -d ,
        
EOF
}

## if there are no arguments provided, show help
if [[ $# == 0 ]]; then show_help; exit 1; fi

while getopts ":hf:c:d:" opt; do
  case "$opt" in
    h) show_help;exit 0;;
    f) File2extract=$OPTARG;;
    c) colNames=$OPTARG;;
    d) delim=$OPTARG;;
    '?') echo "Invalid option $OPTARG"; show_help >&2; exit 1;;
  esac
done
	

## set up the default delimiter to be tab, Note the way I specify tab 

delim=${delim:-$'\t'}

## get the number of columns in the data frame that match the column names in the colNames file.
## change the output to 2,5,6,22,... and get rid of the last comma  so cut -f can be used
 
cols=$(head -1 "${File2extract}" | tr "${delim}" "\n" | grep -nf "${colNames}" | sed 's/:.*$//' | tr "\n" "," | sed 's/,$//')

## cut out the columns 
cut -d"${delim}" -f"${cols}" "${File2extract}"

or use csvtk from Shen Wei:

csvtk cut -t -f $(paste -s -d , list.txt) data.tsv

merge all bed files and add a column for the filename.

awk '{print $0 "\t" FILENAME}' *bed 

add or remove chr from the start of each line

# add chr
sed 's/^/chr/' my.bed

# or
awk 'BEGIN {OFS = "\t"} {$1="chr"$1; print}'

# remove chr
sed 's/^chr//' my.bed

check if a tsv files have the same number of columns for all rows

awk '{print NF}' test.tsv | sort -nu | head -n 1

Parallelized samtools mpileup

https://www.biostars.org/p/134331/

BAM="yourFile.bam"
REF="reference.fasta"
samtools view -H $BAM | grep "\@SQ" | sed 's/^.*SN://g' | cut -f 1 | xargs -I {} -n 1 -P 24 sh -c "samtools mpileup -BQ0 -d 100000 -uf $REF -r \"{}\" $BAM | bcftools call -cv > \"{}\".vcf"

convert multiple lines to a single line

This is better than tr "\n" "\t" because somtimes I do not want to convert the last newline to tab.

cat myfile.txt | paste -s 

merge multiple files with same header by keeping the header of the first file

I usually do it in R, but like the quick solution.

https://stackoverflow.com/questions/16890582/unixmerge-multiple-csv-files-with-same-header-by-keeping-the-header-of-the-firs

awk 'FNR==1 && NR!=1{next;}{print}' *.csv 

# or

awk '
    FNR==1 && NR!=1 { while (/^<header>/) getline; }
    1 {print}
' file*.txt >all.txt

insert a field into the first line

cut -f1-4 F5.hg38.enhancers.expression.usage.matrix | head
CNhs11844	CNhs11251	CNhs11282	CNhs10746
chr10:100006233-100006603	1	0	0
chr10:100008181-100008444	0	0	0
chr10:100014348-100014634	0	0	0
chr10:100020065-100020562	0	0	0
chr10:100043485-100043744	0	0	0
chr10:100114218-100114567	0	0	0
chr10:100148595-100148922	0	0	0
chr10:100182422-100182522	0	0	0
chr10:100184498-100184704	0	0	0

sed '1 s/^/enhancer\t/' F5.hg38.enhancers.expression.usage.matrix | cut -f1-4 | head
enhancer	CNhs11844	CNhs11251	CNhs11282
chr10:100006233-100006603	1	0	0
chr10:100008181-100008444	0	0	0
chr10:100014348-100014634	0	0	0
chr10:100020065-100020562	0	0	0
chr10:100043485-100043744	0	0	0
chr10:100114218-100114567	0	0	0
chr10:100148595-100148922	0	0	0
chr10:100182422-100182522	0	0	0
chr10:100184498-100184704	0	0	0

extract PASS calls from vcf file

cat my.vcf | awk -F '\t' '{if($0 ~ /\#/) print; else if($7 == "PASS") print}' > my_PASS.vcf

replace a pattern in a specific column

## column5 
awk '{gsub(pattern,replace,$5)}1' in.file

## http://bioinf.shenwei.me/csvtk/usage/#replace
csvtk replace -f 5 -p pattern -r replacement 

move a process to a screen session

https://www.linkedin.com/pulse/move-running-process-screen-bruce-werdschinski/

1. Suspend: Ctrl+z
2. Resume: bg
3. Disown: disown %1
4. Launch screen
5. Find pid: prep BLAH
6. Reparent process: reptyr ###

count uinque values in a column and put in a new

https://www.unix.com/unix-for-beginners-questions-and-answers/270526-awk-count-unique-element-array.html

# input
blabla_1 A,B,C,C
blabla_2 A,E,G
blabla_3 R,Q,A,B,C,R,Q

# output
blabla_1 3
blabla_2 3
blabla_3 5


awk '{split(x,C); n=split($2,F,/,/); for(i in F) if(C[F[i]]++) n--; print $1, n}' file

get the promoter regions from a gtf file

https://twitter.com/David_McGaughey/status/1106371758142173185

Create TSS bed from GTF in one line:

zcat gencode.v29lift37.annotation.gtf.gz | awk '$3=="gene" {print $0}' | grep protein_coding | awk -v OFS="\t" '{if ($7=="+") {print $1, $4, $4+1} else {print $1, $5-1, $5}}' > tss.bed

or 5kb flanking tss

zcat gencode.v29lift37.annotation.gtf.gz | awk '$3=="gene" {print $0}' | grep protein_coding | awk -v OFS="\t" '{if ($7=="+") {print $1, $4, $4+5000} else {print $1, $5-5000, $5}}' > promoters.bed

caveat: some genes are at the end of the chromosomes, add or minus 5000 may go beyond the point, use bedtools slop with a genome size file to avoid that.

download fetchChromSizes from http://hgdownload.soe.ucsc.edu/admin/exe/linux.x86_64/

fetchChromSizes hg19 > chrom_size.txt

zcat gencode.v29lift37.annotation.gtf.gz | awk '$3=="gene" {print $0}' |  awk -v OFS="\t" '{if ($7=="+") {print $1, $4, $4+1} else {print $1, $5-1, $5}}' | bedtools slop -i - -g chrom_size.txt -b 5000 > promoter_5kb.bed

reverse one column of a txt file

reverse column 3 and put it to column5

awk -v OFS="\t" '{"echo "$3 "| rev" | getline $5}{print $0}' 

#or use perl reverse second column
perl -lane 'BEGIN{$,="\t"}{$rev=reverse $F[2];print $F[0],$F[1],$rev,$F[3]}