This distribution contains the example applications for the DW1000 IR-UWB transceiver within the mynewt-OS. The dw1000 device driver model is integrated into the mynewt-OS (https://github.com/decawave/mynewt-dw1000-core). This driver includes native support for a 6lowPAN stack, Ranging Services, and Location Services, etc. Mynewt and its build environment tool newt and management tool newtmgt creates a powerful environment for deploying large-scale distributions within IoT.
For these examples, we leverage the Decawave dwm1001 module and dwm1001-dev kit. The DWM1001 includes a nrf52832 and the DW1000 transceiver. The DWM1001-DEV is a breakout board that supports a Seggar OB-JLink interface with RTT support. The mynewt build environment provides a clean interface for maintaining platform agnostic distributions. The DWM1001-DEV and the examples contained herein provide a clean out-of-the-box experience for UWB Location Based Services.
Warning: The DWM1001 comes flashed with a UWB Location Based Services stack. This distribution repurposes the hardware and is not intended to replace the functionality of the shipped stack. This distribution is intended to be a starting point for evaluating and developing one's own stacks.
Project discussion board, http://decawave.slack.com
- DWM1001 from https://www.decawave.com/products/dwm1001-module
- DWM1002 from https://decawave.com (coming soon)
- DWM1003 from https://decawave.com (coming soon)
- locomo from http://www.ubitraq.com
- lps2mini from https://loligoelectronics.com
- lps2nano from https://loligoelectronics.com
The remainder of this README.md shows how to bring up the elementary twr_node/twr_tag examples for the DWM1001_DEV kit.
- Download and install Apache Newt.
You will need to download the Apache Newt tool, as documented in the Getting Started Guide.
Prerequisites: You should follow the generic tutorials at http://mynewt.apache.org/latest/tutorials/tutorials.html, particularly the basic Blinky example that will guide you through the basic setup.
- Download the DW1000 Mynewt apps.
git clone [email protected]:Decawave/mynewt-dw1000-apps.git
cd mynewt-dw1000-apps
- Running the newt install command downloads the apache-mynewt-core, mynewt-dw1000-core, and mynewt-timescale-lib packages, these are dependent repos of the mynewt-dw1000-apps project and are automatically checked-out by the newt tools.
$ newt install
- To erase the default flash image that shipped with the DWM1001.
$ JLinkExe -device nRF52 -speed 4000 -if SWD
J-Link>erase
J-Link>exit
$
- Build the new bootloader applicaiton for the DWM1001 target.
(executed from the mynewt-dw1000-app directory).
newt target create dwm1001_boot
newt target set dwm1001_boot app=@apache-mynewt-core/apps/boot
newt target set dwm1001_boot bsp=@mynewt-dw1000-core/hw/bsp/dwm1001
newt target set dwm1001_boot build_profile=optimized
newt build dwm1001_boot
newt create-image dwm1001_boot 1.0.0
newt load dwm1001_boot
- On the first DWM1001-DEV board build the Two-Way-Ranging (twr_tag_tdma) application for the DWM1001 module. The run command compiles the project and loads the image on the target platform.
(executed from the mynewt-dw1000-app directory).
newt target create twr_tag_tdma
newt target set twr_tag_tdma app=apps/twr_tag_tdma
newt target set twr_tag_tdma bsp=@mynewt-dw1000-core/hw/bsp/dwm1001
newt target set twr_tag_tdma build_profile=debug
newt run twr_tag_tdma 0
- On a second DWM1001-DEV board build the node side of the Two-Way-Ranging (twr_node_tdma) application as follows.
(executed from the mynewt-dw1000-app directory).
newt target create twr_node_tdma
newt target set twr_node_tdma app=apps/twr_node_tdma
newt target set twr_node_tdma bsp=@mynewt-dw1000-core/hw/bsp/dwm1001
newt target set twr_node_tdma build_profile=debug
newt run twr_node_tdma 0
- Both examples are configured to use the Segger RTT console interface. This is covered within the mynewt tutorials/Tooling/SeggerRTT (http://mynewt.apache.org/latest/tutorials/tooling/segger_rtt.html). To launch the console simply telnet localhost 19021. Note at time of writing the newt tools does not support multiple connect dwm1001-dev devices. So it is recomended that you connect twr_tag_tdma and twr_node_tdma examples to different computers or at least the twr_tag_tdma to an external battery. If all goes well you should see the twr_node_tdma example stream range information on the console.
(executed from the mynewt-dw1000-app directory).
nc localhost 19021