-- WEB-GUI based system for camping or boat trips, runable on raspberry pi 3, includes:
-
Rotator is scanning for best net ( 3G / 4G ) and align to strongest signal
-
Scan cycles and methode dependent on changing GPS position and signal strength
Scan methodes Ideas (need a solution: my servo for the rotator is pretty noisy):
- activ fast scan (pretty noisy)
- activ slow scan (not so noisy)
- passiv scan (without rotating servo.. just let the boat rotate in the wind if set anchor)
HW-Setup:
- LTE-Modem: Huawei e3372
- Antenna rotor controller: Arduino Mega 2560 or Arduino Nano
- Gyro / Compass sensor for Arduino: GY-91 MPU9250 BMP280 10DOF
- https://www.instructables.com/id/Tilt-Compensated-Compass/
- Scanning permanently for free WIFI and test ping 8.8.8.8 if usable
-
plot data from weather sensor on raspberry pi to web page
HW-Setup:
- Weather sensor: BME280 on Raspberry pi
- https://www.raspberrypi-spy.co.uk/2016/07/using-bme280-i2c-temperature-pressure-sensor-in-python/
-
change GPS cordinates for Maps an Links on web page
HW-Setup:
- GPS - Stick: Diymall Vk-172 vk 172 Gmouse G-Maus Usb
- huawei-lte-api
- pySerial
- matplotlib
- shutil
for bme2800.py additional:
- mpld3
- smbus
- gps
Source: https://www.raspberrypi-spy.co.uk/2016/07/using-bme280-i2c-temperature-pressure-sensor-in-python/
All of this are under development.
Some parts, like wifi/main.py
or web_gui/bme280.py, are ready to useable as standalone.
Where is the piano, I carry the notes...