artnet-bridge

Translate Art-Net packets from popular lighting control software into KiNET packets destined for multiple Philips Color Kinetics power/data supplies.

Building from source requires the Rust toolchain. https://www.rust-lang.org/tools/install

Build and run with cargo

$ cargo run -- -a 192.168.1.1 -k 10.0.0.1 -m 1:0:1:10.32.152.122:0
 2020-06-07T18:53:33.773Z INFO  artnet_bridge > Listening for Art-Net packets on 192.168.1.1
 2020-06-07T18:53:33.773Z INFO  artnet_bridge > Transmitting KiNET on 10.0.0.1
 2020-06-07T18:53:33.774Z INFO  artnet_bridge > Mapping Art-Net to the following KiNET destinations:
 2020-06-07T18:53:33.774Z INFO  artnet_bridge > KinetDestination { artnet_network: 1, artnet_subnet: 0, artnet_universe: 1, kinet_address: "10.32.152.122", kinet_socket_addr: V4(10.32.152.122:6038), kinet_port: 0 }

Full options

artnet-bridge 0.1.0
Map Art-Net universes to KiNET PDS endpoints

USAGE:
    artnet-bridge.exe [FLAGS] [OPTIONS]

FLAGS:
    -h, --help       Prints help information
    -q, --quiet      Make output less verbose. Add -q to only show warnings and errors, -qq to only show errors, and
                     -qqq to silence output completely
    -V, --version    Prints version information
    -v, --verbose    Make output more verbose. Add -v for debugging info, add -vv for even more detailed message tracing

OPTIONS:
    -a <artnet-receive-ip>           The IPv4 network address where Art-Net packets will be received
    -k <kinet-send-ip>               The IPv4 network address that KiNET packets should be sent from
    -m, --mapping <map-string>...    Map a single Art-Net universe data to a KiNET destination. Each map-string contains
                                     an Art-Net source universe and a KiNET destination IPv4 address, with optional
                                     KiNET output port, all separated by colons. Art-Net source universes can be
                                     specified as just a single universe value, or as a network, subnet, and universe.
                                     1:0:15:10.0.0.1:3 would listen for Art-Net output commands destined for network 1,
                                     subnet 0, universe 15, and resend that output data to the KiNET PDS at 10.0.0.1,
                                     for output on KiNET port 3. Specifying no port, or 0, will send a KiNET v1 message;
                                     specifying port 1-16 will send a KiNET v2 PORTOUT message. If any
                                     network/subnet/universe values are not provided, they will be assumed to be 0, so
                                     the following are all valid: -m 10.0.0.4 -m 3:192.168.10.100 -m 1:4:13:10.0.1.4 -m
                                     192.168.0.15:10 -m 1:1:10.0.0.2:2
    -f, --file <config-file>         Path to a file containing configuration options. All command-line options can be
                                     specified in the config file; command-line options will override options in file
                                     where there's a conflict

Configuration files

Options can be specified in a configuration file in addition to the command line. If an argument is provided both in the configuration file and on the command line, the command line value will be used, except for PDS addresses, which will be combined from both sources.

examples/config.json

{
    "artnet_receive_ip": "192.168.1.1",
    "kinet_send_ip": "10.0.0.1",
    "mappings": [
        "0:10.32.152.122:0",
        "1:10.32.152.123:0"
    ]
}

$ cargo run -- -f examples/config.json
 2020-06-07T19:03:22.651Z INFO  artnet_bridge > Listening for Art-Net packets on 192.168.1.1
 2020-06-07T19:03:22.656Z INFO  artnet_bridge > Transmitting KiNET on 10.0.0.1
 2020-06-07T19:03:22.673Z INFO  artnet_bridge > Mapping Art-Net to the following KiNET destinations:
 2020-06-07T19:03:22.673Z INFO  artnet_bridge > KinetDestination { artnet_network: 0, artnet_subnet: 0, artnet_universe: 0, kinet_address: "10.32.152.123", kinet_socket_addr: V4(10.32.152.123:6038), kinet_port: 0 }
 2020-06-07T19:03:22.691Z INFO  artnet_bridge > KinetDestination { artnet_network: 0, artnet_subnet: 0, artnet_universe: 1, kinet_address: "10.32.152.122", kinet_socket_addr: V4(10.32.152.122:6038), kinet_port: 0 }

Running tests

$ cargo test

Project Initial Goals

• Provide a way to integrate CK lighting hardware with popular software control environments
• Create a virtual Art-Net destination that bridges to KiNET protocol devices
• Run on PC/Mac/Linux desktops and Raspberry Pis
• Maximize performance & reliability

Medium-Term Goals

• Implement KiNET discovery and readdressing protocols, spin out a kinet_protocol crate
• Support embedded platforms without heap allocation (e.g. compile with #![no_std]).

Potential Long-Term Goals

• Implement a web-based live configuration panel?
• Support OpenPixelControl as an output protocol alongside KiNET?
• Support sACN as an input protocol alongside Art-Net?