Skip to content

Latest commit

 

History

History
executable file
·
14 lines (13 loc) · 1.16 KB

README_US.md

File metadata and controls

executable file
·
14 lines (13 loc) · 1.16 KB
Raw

Bosch B Series, G Series and GV4 Panels configuration

Panel Settings

RPS Software installation

  • Connect to your Bosch Control Panel with RPS Software.
  • Initial connection to your Bosch Control Panel with RPS through network requires an RPS passcode. RPS passcode should be provided with your hardware. If RPS Passcode is not avaiblable, a connection to your panel can be established with a direct USB cable.

Required Control Panel RPS configurations options

  • Connect your Bosch Control Panel to your home network through the on boad ethernet adapter. Note your Control Panel IP Address on your router or network logs.
  • In AUTOMATION - REMOTE APP menu, set Automation Device to Mode 2
  • In AUTOMATION - REMOTE APP menu, set an "Automation passcode"
  • In PANEL WIDE PARAMETERS - ON BOARD ETHERNET COMMUNICATOR menu, note TCP/UDP PORT NUMBER (defaults to 7700)
  • Your Bosch Control Panel needs to be update to a recent firmware with RPS Software
  1. Needed for a secure connection using TLS > 1.0 with Homebridge
  2. Intrusion Integration Protocol Version >= 5.208 needed for push notifications.