How To Install And Use GStreamer

Install GStreamer on the Raspberry Pi

Just install the following packages by running the commands below:

$ sudo apt-get install gstreamer1.0-tools
$ sudo apt-get install gstreamer1.0-omx
$ sudo apt-get install gstreamer1.0-plugins-bad
$ sudo apt-get install gstreamer1.0-plugins-good
$ sudo apt-get install gstreamer1.0-nice
$ sudo apt-get install gstreamer1.0-plugins-ugly

Install GStreamer on Windows

Download and install the latest version form here. Choose the gstreamer-1.0-x86_64-VERSION.msi package and install all features.

Use GStreamer

On windows run:

gst-launch-1.0 udpsrc port=<ANYPORT> ! application/x-rtp,encoding-name=H264,payload=96 ! rtph264depay ! avdec_h264 ! videoconvert ! autovideosink

On the raspberry pi run:

raspivid -t 0 -n -h 720 -w 1280 -fps 60 -b 3000000 -o - | gst-launch-1.0 -v fdsrc ! h264parse config-interval=1 ! rtph264pay ! udpsink host=<WINDOWSIPHERE> port=<ANYPORT>

WINDOWSIPHERE is the IP of the Windows machine and ANYPORT is any port where both have to be the same (Example 5000).

You can also add the -hf or -vf flags after raspivid to flip the image horizontally or vertically if needed.