ESP32 based GameCube Controller Bluetooth conversion for Nintendo Switch
-
Use this esp-idf fork here: https://github.com/NathanReeves/esp-idf
-
Set up the esp-idf environment: https://docs.espressif.com/projects/esp-idf/en/latest/get-started/
-
Get the BlueCubeModv2 firmware
-
If you haven’t flashed an ESP32 project before, you need the port name of ESP32 for the config file. If using unix system, to get the port name of a USB device run:
ls /dev
-
Find your device on the list and copy it. It should look something like: /dev/cu.usbserial-DO01EXOV or /dev/cu.SLAB_USBtoUART
-
cd into project folder and run:
idf.py build
-
Paste your port name into Serial Flasher Config -> Default Serial Port
-
Compile and flash the program, run:
idf.py -p <PORT> flash monitor
Resources used:
http://www.int03.co.uk/crema/hardware/gamecube/gc-control.htm
https://github.com/dekuNukem/Nintendo_Switch_Reverse_Engineering
https://github.com/timmeh87/switchnotes
Thank you to @Molorius for implementing the bluedroid Classic stack for esp