reatactable klicky prob dock, for VZbot and other printer
The inspiration for this project comes from the Klicky prob project. With the help of JosAr
https://github.com/jlas1/Klicky-Probe
3DP + ME https://discord.gg/N52sGPjb
under construction
General Bill of Materials (BOM) Tools:
- 1.5mm Drill (optional)
- 3mm Drill (optional)
- 6 mm Drill (optional)
- Multimeter to check for Continuity
- Super Glue
- Soldering Iron for the heat inserts
Probe BOM:
- 1x microswitch (the omron D2F-5 or D2F-5L (removing the lever) is recommended), D2F-1 and similar sizes microswitch also work
- 2x M2x10 mm self tapping
- 4x 6 mm x 3 mm magnets (it ranges from 8 to 10)
- some m5 screws
- some m3 screws
- some m3 heat inserts
- some m3 nuts
Retractable dock (BOM)
- 1x MG 90s Servo (Tower pro)
- 1x - 6 mm x 3 mm magnet
- 2x M2x10 mm self tapping
- some m3 screws
- 2 m3 heat inserts
- some m3 nuts