Reverting hotlinked fixes

ExpressLRS · Feb 24, 2024 · 669b979 · 669b979
1 parent 2003702
commit 669b979
Show file tree

Hide file tree

Showing 39 changed files with 269 additions and 269 deletions.
diff --git a/docs/assets/images/receiverLED/LEDSEQ_BINDING_10_10_10_100.gif b/docs/assets/images/receiverLED/LEDSEQ_BINDING_10_10_10_100.gif
diff --git a/docs/assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif b/docs/assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif
diff --git a/docs/assets/images/receiverLED/LEDSEQ_MODEL_MISMATCH_10_10_10_10_10_100.gif b/docs/assets/images/receiverLED/LEDSEQ_MODEL_MISMATCH_10_10_10_10_10_100.gif
diff --git a/docs/assets/images/receiverLED/LEDSEQ_RADIO_FAILED_20_100.gif b/docs/assets/images/receiverLED/LEDSEQ_RADIO_FAILED_20_100.gif
diff --git a/docs/assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif b/docs/assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif
diff --git a/docs/assets/images/receiverLED/LED_ON.gif b/docs/assets/images/receiverLED/LED_ON.gif
diff --git a/docs/quick-start/binding.md b/docs/quick-start/binding.md
@@ -64,7 +64,7 @@ For traditional binding to work, a Binding Phrase must not be set, at least for
 The Receiver LED should also be blinking when powered up.
 
 <figure markdown>
-![LEDSEQ_DISCONNECTED](../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
+![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif)
 </figure>
 
 ??? danger "Receiver LED doesn't Blink (click/tap to expand)"
@@ -103,7 +103,7 @@ The procedure is as follows:
 3. Make sure the LED is doing a quick double-blink, which indicates the receiver is in bind mode.
 
     <figure markdown>
-    ![LEDSEQ_BINDING](../assets/images/receiverLED/LEDSEQ_BINDING_10_10_10_100.gif)
+    ![LEDSEQ_BINDING](https://cdn.discordapp.com/attachments/738450139693449258/921065812763218010/LEDSEQ_BINDING_10_10_10_100.gif)
     </figure>
 
 4. Power up your transmitter/radio and use the ++"[BIND]"++ button on the ExpressLRS Lua script, which sends out a binding pulse. The Popup will briefly show up and then disappear.
@@ -115,7 +115,7 @@ The procedure is as follows:
 5. If the receiver LED turned into a solid light, it's bound!
 
     <figure markdown>
-    ![CONNECTED](../assets/images/receiverLED/LED_ON.gif)
+    ![CONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812507373568/LED_ON.gif)
     </figure>
 
 ## Connection Check
@@ -154,7 +154,7 @@ Using the [ExpressLRS Lua Script](transmitters/lua-howto.md), look for a `C` in
     This is also indicated by the Receiver LED as 3 fast blinks then a pause:
 
     <figure markdown>
-    ![LEDSEQ_MODEL_MISMATCH](../assets/images/receiverLED/LEDSEQ_MODEL_MISMATCH_10_10_10_10_10_100.gif)
+    ![LEDSEQ_MODEL_MISMATCH](https://cdn.discordapp.com/attachments/738450139693449258/921065813425934446/LEDSEQ_MODEL_MISMATCH_10_10_10_10_10_100.gif)
     </figure>
 
     If you've deliberately set up Model Matching following [this page](../software/model-config-match.md), make sure your settings are correct.

diff --git a/docs/quick-start/led-status.md b/docs/quick-start/led-status.md
@@ -27,12 +27,12 @@ Receivers with a single color LED communicate their status as follows:
 
 || LED Indication | Status |
 |---|---|---|
-|![LEDSEQ_DISCONNECTED](../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)| Slow blink 500ms on/off | Waiting for connection from transmitter |
-|![LEDSEQ_WIFI_UPDATE](../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)| Fast blinking 25ms on/off | WiFi mode enabled |
-|![LEDSEQ_RADIO_FAILED](../assets/images/receiverLED/LEDSEQ_RADIO_FAILED_20_100.gif)| Medium speed blink 100ms on/off | Radio chip not detected |
-|![LEDSEQ_BINDING](../assets/images/receiverLED/LEDSEQ_BINDING_10_10_10_100.gif)| Double blink then pause | Binding mode enabled |
-|![LEDSEQ_MODEL_MISMATCH](../assets/images/receiverLED/LEDSEQ_MODEL_MISMATCH_10_10_10_10_10_100.gif)| Triple blink then pause | Connected to transmitter but mismatched model-match configuration |
-|![CONNECTED](../assets/images/receiverLED/LED_ON.gif)| Solid on | Connected to a transmitter, or bootloader mode enabled |
+|![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif)| Slow blink 500ms on/off | Waiting for connection from transmitter |
+|![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif)| Fast blinking 25ms on/off | WiFi mode enabled |
+|![LEDSEQ_RADIO_FAILED](https://cdn.discordapp.com/attachments/738450139693449258/921065813719527464/LEDSEQ_RADIO_FAILED_20_100.gif)| Medium speed blink 100ms on/off | Radio chip not detected |
+|![LEDSEQ_BINDING](https://cdn.discordapp.com/attachments/738450139693449258/921065812763218010/LEDSEQ_BINDING_10_10_10_100.gif)| Double blink then pause | Binding mode enabled |
+|![LEDSEQ_MODEL_MISMATCH](https://cdn.discordapp.com/attachments/738450139693449258/921065813425934446/LEDSEQ_MODEL_MISMATCH_10_10_10_10_10_100.gif)| Triple blink then pause | Connected to transmitter but mismatched model-match configuration |
+|![CONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812507373568/LED_ON.gif)| Solid on | Connected to a transmitter, or bootloader mode enabled |
 
 Receivers with RGB LED show status as indicated below:
 

diff --git a/docs/quick-start/receivers/axisflying-thor.md b/docs/quick-start/receivers/axisflying-thor.md
@@ -96,7 +96,7 @@ Some of the following procedures will not go through, particularly the via Passt
     8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
 
         <figure markdonw>
-        ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
+        ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif)
         </figure> 
 
 === "via UART"
@@ -167,7 +167,7 @@ Some of the following procedures will not go through, particularly the via Passt
     11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
 
         <figure markdonw>
-        ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
+        ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif)
         </figure>
 
 === "via WiFi"
@@ -242,7 +242,7 @@ Some of the following procedures will not go through, particularly the via Passt
                     - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
 
                     <figure markdown>
-                    ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
+                    ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif)
                     </figure>
 
             === "using the ExpressLRS Lua Script" 
@@ -272,7 +272,7 @@ Some of the following procedures will not go through, particularly the via Passt
                 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
 
                     <figure markdown>
-                    ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
+                    ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif)
                     </figure>
 
             ??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -319,7 +319,7 @@ Some of the following procedures will not go through, particularly the via Passt
         14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
 
             <figure markdonw>
-            ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
+            ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif)
             </figure>
 
     === "Manual Upload via Local WiFi"
@@ -386,7 +386,7 @@ Some of the following procedures will not go through, particularly the via Passt
                     - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
 
                     <figure markdown>
-                    ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
+                    ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif)
                     </figure>
 
             === "using the ExpressLRS Lua Script" 
@@ -416,7 +416,7 @@ Some of the following procedures will not go through, particularly the via Passt
                 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
 
                     <figure markdown>
-                    ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
+                    ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif)
                     </figure>
 
             ??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -464,7 +464,7 @@ Some of the following procedures will not go through, particularly the via Passt
         13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
 
             <figure markdonw>
-            ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
+            ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif)
             </figure>
 
     === "Auto Upload"
@@ -492,7 +492,7 @@ Some of the following procedures will not go through, particularly the via Passt
                     - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
 
                     <figure markdown>
-                    ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
+                    ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif)
                     </figure>
 
             === "using the ExpressLRS Lua Script" 
@@ -522,7 +522,7 @@ Some of the following procedures will not go through, particularly the via Passt
                 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
 
                     <figure markdown>
-                    ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
+                    ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif)
                     </figure>
 
             ??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -570,7 +570,7 @@ Some of the following procedures will not go through, particularly the via Passt
         8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
 
             <figure markdonw>
-            ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
+            ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif)
             </figure>
 
 [Lua Running]: ../../assets/images/lua/config-bw.png

diff --git a/docs/quick-start/receivers/betafpv-superd.md b/docs/quick-start/receivers/betafpv-superd.md
@@ -85,7 +85,7 @@ Some of the following procedures will not go through, particularly the via Passt
     8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
 
         <figure markdonw>
-        ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
+        ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif)
         </figure> 
 
 === "via UART"
@@ -156,7 +156,7 @@ Some of the following procedures will not go through, particularly the via Passt
     11. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
 
         <figure markdonw>
-        ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
+        ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif)
         </figure>
 
 === "via WiFi"
@@ -231,7 +231,7 @@ Some of the following procedures will not go through, particularly the via Passt
                     - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
 
                     <figure markdown>
-                    ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
+                    ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif)
                     </figure>
 
             === "using the ExpressLRS Lua Script" 
@@ -261,7 +261,7 @@ Some of the following procedures will not go through, particularly the via Passt
                 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
 
                     <figure markdown>
-                    ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
+                    ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif)
                     </figure>
 
             ??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -308,7 +308,7 @@ Some of the following procedures will not go through, particularly the via Passt
         14. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
 
             <figure markdonw>
-            ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
+            ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif)
             </figure>
 
     === "Manual Upload via Local WiFi"
@@ -375,7 +375,7 @@ Some of the following procedures will not go through, particularly the via Passt
                     - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
 
                     <figure markdown>
-                    ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
+                    ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif)
                     </figure>
 
             === "using the ExpressLRS Lua Script" 
@@ -405,7 +405,7 @@ Some of the following procedures will not go through, particularly the via Passt
                 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
 
                     <figure markdown>
-                    ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
+                    ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif)
                     </figure>
 
             ??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -453,7 +453,7 @@ Some of the following procedures will not go through, particularly the via Passt
         13. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
 
             <figure markdonw>
-            ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
+            ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif)
             </figure>
 
     === "Auto Upload"
@@ -481,7 +481,7 @@ Some of the following procedures will not go through, particularly the via Passt
                     - The Auto WiFi On Interval setting controls how long the device will wait to initiate WiFi Mode when it's powered up and it's not getting valid CRSF packets.
 
                     <figure markdown>
-                    ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
+                    ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif)
                     </figure>
 
             === "using the ExpressLRS Lua Script" 
@@ -511,7 +511,7 @@ Some of the following procedures will not go through, particularly the via Passt
                 6. The Receiver LED will turn into either a Rapid Blinking pattern or a Green Breathing LED pattern(for Receivers using an RGB LED) indicating it is now in WiFi Mode.
 
                     <figure markdown>
-                    ![LEDSEQ_WIFI_UPDATE](../../assets/images/receiverLED/LEDSEQ_WIFI_UPDATE_2_3.gif)
+                    ![LEDSEQ_WIFI_UPDATE](https://cdn.discordapp.com/attachments/738450139693449258/921065813983760384/LEDSEQ_WIFI_UPDATE_2_3.gif)
                     </figure>
 
             ??? Warning "My Receiver has Solid LED and won't go into WiFi Mode! (click/tap to expand)"
@@ -559,7 +559,7 @@ Some of the following procedures will not go through, particularly the via Passt
         8. The LED on the Receiver should return to Slow Blinking LED pattern after a few seconds.
 
             <figure markdonw>
-            ![LEDSEQ_DISCONNECTED](../../assets/images/receiverLED/LEDSEQ_DISCONNECTED_50_50.gif)
+            ![LEDSEQ_DISCONNECTED](https://cdn.discordapp.com/attachments/738450139693449258/921065812985520268/LEDSEQ_DISCONNECTED_50_50.gif)
             </figure>
 
 [Lua Running]: ../../assets/images/lua/config-bw.png