This is frimware of SD WIFI PRO(SWP)
Binary firmware have put into "tools\Flash\binary" directory.
-
Let SD WIFI PRO and SD WIFI PRO dev board to work together Insert SD WIFI PRO into dev board socket, let USB cable inset to USB Type-C connector, and plug the cable to PC USB port. Let the DIP is on right status: switch 1 is at OFF status, switch 2 is at ON status. If SD WIFI PRO and dev board are OK, "USB-SERIASL CH340(COMX)" will show at Ports COM & LPT in Device Manager in Windows 10.
-
Flash There is a batch script named install-all-8M.bat at "tools\Flash" directory.
Using the script to flash firmware bin to SD WIFI PRO at Command Prompt in windows operations system.
After power up, SD WIFI PRO will create a wireless access points, the AP ssid named as "SD-WIFI-PRO-RD". Let device,such as PC and mobile, connect wirelessly to SD-WIFI-PRO-RD, after success, you can access the SD WIFI PRO by web browser. The default AP local ip is 192.168.4.1, so usging "http://192.168.4.1" the Web address to asscess to SD WIFI PRO.
- List and Upload files After acccess to SD WIFI PRO by http://192.168.4.1, now SWD show file list page at brownse. The page list all the files in the SD card of SD WIFI PRO(8GB high-spped memory).
At the top block of the page , select a file , click "Upload" button to upload file to SD WIFI PRO.
Click "SETTING" in the left on the top block of the page, will show wifi.htm page.
- Setting Config SD WIFI PRO WiFi at wifi.htm page.
Input the right network ssid and password ,click the "Connect" button can let the SD WIFI PRO connect to a WiFi network. Click "Go to AP mode", can change SD WIFI PRO into AP mode.
The 0.x release use Arduino to compile.
Note:the SD WIFI PRO use AsyncTCP and ESPAsyncWebServer.
AsyncTCP: https://github.com/dvarrel/AsyncTCP
ESPAsyncWebServer: https://github.com/me-no-dev/ESPAsyncWebServer