meta-fsl-ivi, Freescale In-Vehicle Infotainment
=====================================================

This layer's purpose is to add specific Freescale support
for In-Vehicle Infotainment based on GENIVI meta-ivi layer

A distro configuration fsl-ivi-vfb: allows a user to enable
Freescale MXGAL graphics backend for the Genivi LayerManager.

The MXGAL graphics backend for the Genivi LayerManager enables the
composition tasks of LayerManager to be accellerated using the 2D
raster GPU present on the Freescale i.MX6 processors.

Layer dependencies
=====================================================

URI: git://git.yoctoproject.org/poky
branch: master
revision: 9be73af04f4121c6266b0c76b520bdb40f644eb8

URI: git://git.yoctoproject.org/meta-fsl-arm
branch: master
revision: a0f089fdf75a1d40d394ab32d65930a1f629fef7

URI: git://git.openembedded.org/meta-ivi
branch: 4.0
revision: 5e8e209c666f5c596728c4589aaca964208cf5fb

Build Genivi 4.0 p1 with MXGAL LayerManager backend
=====================================================

1. Source oe-init-build-env

	source oe-init-build-env

2. Add meta-fsl-ivi layer dependency paths to COREBASE/build/conf/bblayers.conf
   in BBLAYERS variable.

3. Set MACHINE ?= "imx6qsabreauto" in COREBASE/build/conf/local.conf

4. Add INCOMPATIBLE_LICENSE = "GPLv3" in COREBASE/build/conf/local.conf file.

5. Set DISTRO ?= "fsl-ivi-vfb" in COREBASE/build/conf/local.conf file.

6. Add preferred u-boot version in COREBASE/build/conf/local.conf

	UBOOT_SUFFIX = "bin"
	UBOOT_PADDING = "2"
	PREFERRED_PROVIDER_u-boot = "u-boot-imx"

7. Accept End User License Agrement to use prebuilt GPU binaries
   add in COREBASE/build/conf/local.conf

	ACCEPT_FSL_EULA = "1"

7. Build foton-image including GENIVI 4.0 (Foton) P1 components and MXGAL backend

	bitbake foton-image

Running MXGAL test applications
=====================================================

1. Deploy rootfs image into and sdcard

	sudo dd if=foton-image-imx6qsabreauto.sdcard of=/dev/SDxx && sync && sync

2. Place SD on imx6sabreauto and poweron

3. Start LayerManager

	systemctl start layermanager.service

4. Run test application

	EGLVFBMockNavigation &