The LED Piano  

"The LED Piano" is a project that allows for and LED strip to interactively assist your piano playing using the Synthesia

About The Project

Inspired by: Onlaj's Piano LED Visualizer.

Main reason I chose to rewrite it from scratch was:

• Move to Python3
• Make the codebase useable (Onlaj's has 1 file with ~ 3000 lines)
• Maintain two connections (piano/synthesia) instead of 1 (synthesia)
  • This allows us to do cool things like mark notes red/white depending on if you play them correctly
• Make it more hands off. Plug it in and connect. The project handles reconnections of devices seemlessly so no more sshing to get things to work.
• Overall productionalizing that I felt the original repo was missing

Installation

1. Clone the repo

git clone https://github.com/GrahamMThomas/TheLEDPiano.git

2. Install required packages

python3 -m venv venv
source venv/bin/activate
pip install -r requirements.txt

3. Add midiusb.rules file

cp 33-midiusb.rules /etc/udev/rules.d/33-midiusb.rules
sudo udevadm control --reload
sudo service udev restart

4. Install rtpmidi

• Run and create a session. Name it whatever you want. Enable it. Ignore Bonjour errors
• Create a new Remote Peer (+ sign under directory). Chuck your PI address and use 5004 as the port
• Click connect and then turn on your piano (You have to reconnect rtpmidi everytime the piano turns off)

5. Open synthesia and make sure they are connected

• Set Key light to "Finger-Based" channel
• Uncheck all boxes under "Use this device for:" section

6. Get Device names and add to config.yaml

aconnect -l

Example Output:

client 0: 'System' [type=kernel]
    0 'Timer           '
    1 'Announce        '
client 14: 'Midi Through' [type=kernel]
    0 'Midi Through Port-0'
client 20: 'Clavinova' [type=kernel,card=1]
    0 'Clavinova MIDI 1'
        Connecting To: 128:1
        Connected From: 128:1
client 128: 'rtpmidi raspberrypi' [type=user,pid=1459]
    0 'Network         '
    1 'Maelstrom       '
        Connecting To: 20:0
        Connected From: 20:0

Here your piano device name is Clavinova MIDI 1 and synthesia is Maelstrom. Put these values into the config.yaml

7. Configure to run on boot

sudo cp pianoled.service /lib/systemd/system/
sudo chmod 644 /lib/systemd/system/pianoled.service
sudo systemctl daemon-reload
sudo systemctl enable pianoled.service
sudo reboot

Roadmap

See the open issues for a list of proposed features (and known issues).

Contributing

Contributions are what make the open source community such an amazing place to be learn, inspire, and create. Any contributions you make are greatly appreciated.

1. Fork the Project
2. Create your Feature Branch (git checkout -b feature/AmazingFeature)
3. Commit your Changes (git commit -m 'Add some AmazingFeature')
4. Push to the Branch (git push origin feature/AmazingFeature)
5. Open a Pull Request

License

Distributed under the MIT License. See LICENSE for more information.

Contact

Graham Thomas - @CwakrJax - [email protected]

Project Link: https://github.com/GrahamMThomas/TheLEDPiano

Acknowledgements

• Onlaj's Piano LED Visualizer