This integration lets you control your Remeha Home thermostats from Home Assistant.
Before using this integration, make sure you have set up your thermostat in the Remeha Home app. If you are unable to use the Remeha Home app for your thermostat, this integration will not work.
- All climate zones are exposed as climate entities with:
- The following modes:
- Auto mode: the thermostat will follow the clock program. If the target temperature is changed, it will temporarily override the clock program until the next target temperature change in the schedule.
- Heat mode: the thermostat will be set to manual mode and continuously hold the set temperature.
- Off mode: the thermostat is disabled.
- Three presets for the three clock programs available in the Remeha Home app.
- The following modes:
- Each climate zone exposes the following sensors:
- The next schedule setpoint
- The time at which the next schedule setpoint gets activated
- The current schedule setpoint
- Each appliance (CV-ketel) exposes the following sensors:
- The water pressure
Do you have HACS installed? Click the button or follow the instructions.
- Search integrations for Remeha Home
- Click
Install
- Restart Home Assistant
- See Setup
- Install this platform by creating a
custom_components
folder in the same folder as your configuration.yaml, if it doesn't already exist. - Create another folder
remeha_home
in thecustom_components
folder. Copy all files fromcustom_components/remeha_home
into theremeha_home
folder.
- In Home Assitant click on
Configuration
- Click on
Integrations
- Click on
+ Add integration
- Search for and select
Remeha Home
- Enter your email address and password
- Click "Next"
- Enjoy