Skip to content

HarlemSquirrel/python-vivotek

Repository files navigation

python-vivotek

Verify Maintainability

A Python library for Vivotek IP cameras.

Getting Started

Install

This library currently supports Python 3.6 and up.

For Python 3.5 use v0.4.0

pip3 install libpyvivotek

# Or for only the current user
pip3 install --user libpyvivotek

Usage

from libpyvivotek import VivotekCamera

cam = VivotekCamera(host='192.168.1.123', port=443, usr='user', pwd='passw0rd',
                    digest_auth=True, ssl=True, verify_ssl=True, sec_lvl='admin')
print("Camera model is %s" % cam.model_name)
# Camera model is IB8369A

Authentication

Some camera models use digest by default so if you know the credentials are correct but are still seeing "Unauthorized" then try with digest_auth=True.

Security Level

Four security levels are currently supported:

  • anonymous
  • viewer
  • operator
  • admin

Using the anonymous security level does not require a user or password. The operator or admin security level is required to set parameters.

Load password from Keyring

We can use Python Keyring to load the password rather than from a string.

# Install the package
pip install --user keyring

# Set the password using the command-line interface.
python -m keyring set camera user passw0rd
import keyring
from libpyvivotek import VivotekCamera

cam = VivotekCamera(host='192.168.1.123', port=443, usr='user',
                    pwd=keyring.get_password('camera', 'user'), sec_lvl='admin')
print("Camera model is %s" % cam.model_name)
# Camera model is IB8369A

View a snapshot image

We can optionally specify the image quality to snapshot() from 1 to 5 with a default of 3.

from libpyvivotek import VivotekCamera
from PIL import Image
from io import BytesIO
import keyring

cam = VivotekCamera(host='192.168.1.123', port=443, usr='user',
                    pwd=keyring.get_password('camera', 'user'), sec_lvl='admin')

snapshot = Image.open(BytesIO(cam.snapshot(quality=3)))

snapshot.show()

Getting parameters

cam.get_param('capability_api_httpversion')
# "0311b_1"

cam.get_param('capability_naudioin')
# "0"

cam.get_param('capability_protocol_https')
# "1"

cam.get_param('event_i0_enable')
# "1"

cam.get_param('motion_c0_enable')
# "1"

Setting parameters

cam.set_param('event_i0_enable', 1)
# "1"

cam.set_param('event_i0_enable', 0)
# "0"

Developing

Install dependencies and run the test suite for a sanity check.

pip install --user -r requirements_test.txt
pip install --user pytest
pytest