Silicon Labs firmware builder repository

This repository contains tools for building firmwares for the Home Assistant Connect ZBT-1/SkyConnect and the Home Assistant Yellow's IEEE 802.15.4 radio. The firmware manifests are entirely generic, however, and are intended to be written easily for any Silicon Labs EFR32 device.

It uses the Silicon Labs Gecko SDK and proprietary Silicon Labs tools such as the Silicon Labs Configurator (slc) and the Simplicity Commander standalone utility.

Background

The project templates in this repository are configured and built for specific boards using manifest files. For example, the skyconnect_zigbee_ncp.yaml manifest file configures the Zigbee firmware for the SkyConnect/Connect ZBT-1.

Setting up Simplicity Studio (for development)

If you are going to be developing using Simplicity Studio, note that each project can potentially use a different Gecko SDK release. It is recommended to forego the typical Simplicity Studio SDK management workflow and manually manage SDKs:

1. Clone a specific version of the Gecko SDK:

   # For macOS
   mkdir ~/SimplicityStudio/SDKs/gecko_sdk_4.4.2
   cd ~/SimplicityStudio/SDKs/gecko_sdk_4.4.2
   
   git clone -b v4.4.2 https://github.com/SiliconLabs/gecko_sdk .
   git checkout -b branch_tag

2. Open preferences, navigate to Simplicity Studio > SDKs, click the Add SDK... button, and browse to the above location.

3. Once the SDK is added, select its entry and click Add Extension....

4. In this repo, add the extensions under gecko_sdk_extensions.

Repeat this process for every necessary SDK version.

Tip

If you have build issues after switching commits, make sure to delete any gecko_sdk_* and template folders from the Simplicity working tree.

Building with a firmware manifest (for building device firmware)

Command line building requires:

• slc-cli
• Simplicity Commander (commander)
• The exact Gecko SDK version required by the project. Note that this doesn't have to be a Git working tree, you can use a GitHub release.
• A compatible toolchain. Take a look at the Dockerfile for the necessary toolchains.

Tip

If you have set up Simplicity Studio on macOS, everything will be automatically detected with the exception of slc. This is the only tool you need to download.

Warning

M1 users should set JAVA_HOME=$(/usr/libexec/java_home -a x86_64) when running the build command to make sure the correct Java version is picked by slc-cli. It currently is not compatible with ARM Java.

slc-cli maintains its own SDK and extension trust store so you first must trust all SDK extensions for every SDK you plan to use:

slc signature trust --sdk ~/SimplicityStudio/SDKs/gecko_sdk_4.4.2
slc signature trust --sdk ~/SimplicityStudio/SDKs/gecko_sdk_4.4.2 --extension-path ~/SimplicityStudio/SDKs/gecko_sdk_4.4.2/extension/nc_efr32_watchdog_extension

tools/build_project.py is the main entry point for building firmwares. Provide paths to potential SDKs and toolchains with the --sdk and --toolchain flags. The build tool will automatically determine which SDK and toolchain to use.

Tip

If you have set up Simplicity Studio on macOS, the default toolchain and SDK paths are automatically found so these flags can be omitted.

pip install -r requirements.txt

python tools/build_project.py \
    # The following SDK and toolchain flags can be omitted on macOS
    --sdk ~/SimplicityStudio/SDKs/gecko_sdk_4.4.0 \
    --sdk ~/SimplicityStudio/SDKs/gecko_sdk_4.4.2 \
    --toolchain '/Applications/Simplicity Studio.app/Contents/Eclipse/developer/toolchains/gnu_arm/10.3_2021.10' \
    --toolchain '/Applications/Simplicity Studio.app/Contents/Eclipse/developer/toolchains/gnu_arm/12.2.rel1_2023.7' \

    --manifest manifests/skyconnect_ncp-uart-hw.yaml \
    --build-dir build \
    --output-dir output \

    # Generate `.gbl`, `.out`, and `.hex` firmwares
    --output gbl \
    --output out \
    --output hex

Once the build is complete, the firmwares will be in the output directory.