tests/ports/psoc6/run_psoc6_tests.sh: Adding print failures by default.

Signed-off-by: enriquezgarc <[email protected]>

tests/ports/psoc6/run_psoc6_tests.sh

@@ -125,13 +125,12 @@ start_test_info() {
 
 run_tests() {
   tests_name=$1
-  debug=$2
-  test_dev=$3
-  tests=$4
-  excluded_tests=$5
-  stub_name=$6
-  stub_dev=$7
-  stub_script=$8
+  test_dev=$2
+  tests=$3
+  excluded_tests=$4
+  stub_name=$5
+  stub_dev=$6
+  stub_script=$7
 
   start_test_info "${tests_name}" "${test_dev}" "${stub_dev}"
 
@@ -146,13 +145,14 @@ run_tests() {
 
   ./run-tests.py --target psoc6 --device ${test_dev} ${test_dir_flag} ${tests} ${excluded_tests}
 
-  update_test_result $?
+  exit_code = $?
 
-  if [ "${debug}" = "true" ]; then
-    echo "Running command: ./run-tests.py --print-failures"
+  if [ ${exit_code} -ne 0 ]; then
     ./run-tests.py --print-failures
+    ./run-tests.py --clean-failures
   fi
 
+  update_test_result ${exit_code}
 
 }
 
@@ -175,7 +175,7 @@ mpremote_vfs_large_file_tests() {
 }
 
 vfs_flash_tests() {
-  run_tests "file system flash" false ${dev_test} \
+  run_tests "file system flash" ${dev_test} \
   "extmod/vfs_basic.py 
    extmod/vfs_lfs_superblock.py
    extmod/vfs_userfs.py"
@@ -185,19 +185,19 @@ vfs_flash_tests() {
 }
 
 vfs_sdcard_tests() {
-  run_tests "file system sdcard" false ${dev_test} "${tests_psoc6_dir}/hw_ext/sdcard.py"
+  run_tests "file system sdcard" ${dev_test} "${tests_psoc6_dir}/hw_ext/sdcard.py"
 
   storage_device="sd"
   mpremote_vfs_large_file_tests
 }
 
 no_ext_hw_tests() {
-  run_tests "no extended hardware" false ${dev_test} "${tests_psoc6_dir}" \
+  run_tests "no extended hardware" ${dev_test} "${tests_psoc6_dir}" \
   "-e ${tests_psoc6_dir}/wdt.py -e ${tests_psoc6_dir}/wdt_reset_check.py"
 }
 
 hw_ext_tests() {
-  run_tests "hardware extended" false ${dev_test} "${tests_psoc6_dir}/hw_ext" \
+  run_tests "hardware extended" ${dev_test} "${tests_psoc6_dir}/hw_ext" \
   "-e ${tests_psoc6_dir}/hw_ext/i2c.py \
    -e ${tests_psoc6_dir}/hw_ext/sdcard.py \
    -e ${tests_psoc6_dir}/hw_ext/uart.py \
@@ -206,34 +206,34 @@ hw_ext_tests() {
 }
 
 adc_tests() {
-  run_tests "adc" false ${dev_test} "${tests_psoc6_dir}/hw_ext/adc.py"
+  run_tests "adc" ${dev_test} "${tests_psoc6_dir}/hw_ext/adc.py"
 }
 
 #PWM
 pwm_tests() {
-  run_tests "pwm" true ${dev_test} "${tests_psoc6_dir}/hw_ext/pwm.py"
+  run_tests "pwm" ${dev_test} "${tests_psoc6_dir}/hw_ext/pwm.py"
 }
 
 i2c_tests() {
-  run_tests "i2c" false ${dev_test} "${tests_psoc6_dir}/hw_ext/i2c.py"
+  run_tests "i2c" ${dev_test} "${tests_psoc6_dir}/hw_ext/i2c.py"
 }
 
 uart_tests() {
-  run_tests "uart" false ${dev_test} "${tests_psoc6_dir}/hw_ext/uart.py"
+  run_tests "uart" ${dev_test} "${tests_psoc6_dir}/hw_ext/uart.py"
 }
 
 bitstream_tests() {
-  run_tests "bitstream" false ${dev_test} "${tests_psoc6_dir}/hw_ext/multi_stub/bitstream_rx.py" \
+  run_tests "bitstream" ${dev_test} "${tests_psoc6_dir}/hw_ext/multi_stub/bitstream_rx.py" \
    "" "bitstream_tx" ${dev_stub} "${tests_psoc6_dir}/hw_ext/multi_stub/bitstream_tx.py"
 }
 
 spi_tests() {
-  run_tests "spi" false ${dev_test} "${tests_psoc6_dir}/hw_ext/multi_stub/spi_master.py" \
+  run_tests "spi" ${dev_test} "${tests_psoc6_dir}/hw_ext/multi_stub/spi_master.py" \
   "" "spi_slave" ${dev_stub} "${tests_psoc6_dir}/hw_ext/multi_stub/spi_slave.py"
 }
 
 i2s_tests() {
-  run_tests "i2s" false ${dev_test} "${tests_psoc6_dir}/hw_ext/multi_stub/i2s_rx.py" \
+  run_tests "i2s" ${dev_test} "${tests_psoc6_dir}/hw_ext/multi_stub/i2s_rx.py" \
   "" "i2s_tx" ${dev_stub} "${tests_psoc6_dir}/hw_ext/multi_stub/i2s_tx.py"
 }