Add documentation for the Encoder Follower

Pathfinder-Java/src/main/java/jaci/pathfinder/followers/EncoderFollower.java

@@ -1,8 +1,13 @@
 package jaci.pathfinder.followers;
 
-import jaci.pathfinder.PathfinderJNI;
 import jaci.pathfinder.Trajectory;
 
+/**
+ * The EncoderFollower is an object designed to follow a trajectory based on encoder input. This class can be used
+ * for Tank or Swerve drive implementations.
+ *
+ * @author Jaci
+ */
 public class EncoderFollower {
 
     int encoder_offset, encoder_tick_count;
@@ -21,26 +26,56 @@ public EncoderFollower(Trajectory traj) {
 
     public EncoderFollower() { }
 
+    /**
+     * Set a new trajectory to follow, and reset the cumulative errors and segment counts
+     */
     public void setTrajectory(Trajectory traj) {
         this.trajectory = traj;
         reset();
     }
 
+    /**
+     * Configure the PID/VA Variables for the Follower
+     * @param kp The proportional term. This is usually quite high (0.8 - 1.0 are common values)
+     * @param ki The integral term. Currently unused.
+     * @param kd The derivative term. Adjust this if you are unhappy with the tracking of the follower. 0.0 is the default
+     * @param kv The velocity ratio. This should be 1 over your maximum velocity @ 100% throttle.
+     *           This converts m/s given by the algorithm to a scale of -1..1 to be used by your
+     *           motor controllers
+     * @param ka The acceleration term. Adjust this if you want to reach higher or lower speeds faster. 0.0 is the default
+     */
     public void configurePIDVA(double kp, double ki, double kd, double kv, double ka) {
         this.kp = kp; this.ki = ki; this.kd = kd;
         this.kv = kv; this.ka = ka;
     }
 
+    /**
+     * Configure the Encoders being used in the follower.
+     * @param initial_position      The initial 'offset' of your encoder. This should be set to the encoder value just
+     *                              before you start to track
+     * @param ticks_per_revolution  How many ticks per revolution the encoder has
+     * @param wheel_diameter        The diameter of your wheels (or pulleys for track systems) in meters
+     */
     public void configureEncoder(int initial_position, int ticks_per_revolution, double wheel_diameter) {
         encoder_offset = initial_position;
         encoder_tick_count = ticks_per_revolution;
         wheel_circumference = Math.PI * wheel_diameter;
     }
 
+    /**
+     * Reset the follower to start again. Encoders must be reconfigured.
+     */
     public void reset() {
         last_error = 0; segment = 0;
     }
 
+    /**
+     * Calculate the desired output for the motors, based on the amount of ticks the encoder has gone through.
+     * This does not account for heading of the robot. To account for heading, add some extra terms in your control
+     * loop for realignment based on gyroscope input and the desired heading given by this object.
+     * @param encoder_tick The amount of ticks the encoder has currently measured.
+     * @return             The desired output for your motor controller
+     */
     public double calculate(int encoder_tick) {
         // Number of Revolutions * Wheel Circumference
         double distance_covered = ((double)(encoder_tick - encoder_offset) / encoder_tick_count)
@@ -60,14 +95,23 @@ public double calculate(int encoder_tick) {
         } else return 0;
     }
 
+    /**
+     * @return the desired heading of the current point in the trajectory
+     */
     public double getHeading() {
         return heading;
     }
 
+    /**
+     * @return the current segment being operated on
+     */
     public Trajectory.Segment getSegment() {
         return trajectory.get(segment);
     }
 
+    /**
+     * @return whether we have finished tracking this trajectory or not.
+     */
     public boolean isFinished() {
         return segment >= trajectory.length();
     }