Skip to content

Fitting spatial conditional models for extreme precipitation

Notifications You must be signed in to change notification settings

Jbrich95/scePrecip

Repository files navigation

Modelling precipitation and spatial aggregate extremes using a conditional framework

Functions for modelling the extremes of spatial aggregates of precipitation using the spatial conditional extremes framework proposed by Wadsworth and Tawn (2022). The provided code is in support of the following two papers:

  • Richards, J., Tawn, J. A., Brown, S. (2022a). Modelling extremes of spatial aggregates using conditional methods. Annals of Applied Statistics, 16 (4) 2693 - 2713. doi.org/10.1214/22-AOAS1609
  • Richards, J., Tawn, J. A., Brown, S. (2022b). Joint estimation of extreme spatially aggregated precipitation at different scales through mixture modelling. Spatial Statistics, 53:100725. doi.org/10.1016/j.spasta.2022.100725
The latter paper uses a very similar model to the former, but the methodology is applied separately to precipitation classified as being either convective or non-convective; this classification is performed using `conv_identification_algo.R`.

The general framework for fitting the models described in Richards et al. (2022a) and Richards et al. (2022b) is the same for both papers. The differences between the marginal and extremal dependence models are implemented within individual scripts. Following the running order of the scripts, provided below, allows the user to fit the marginal and extremal dependence models to Data. Note that if applying the methodology from Richards et al. (2022a), then Data is all observations. To apply the mixture model described in Richards et al. (2022b), Data will be replaced with either conv.precip or nonconv.precip, which are outputs from running the script conv_identification_algo.R; this is Algorithm 1 in Richards et al. (2022b).

The algorithm conv_identification_algo.R takes in as input -

  • Data.grid: an M_1 by M_2 by n array of observations. This corresponds to n observations on an M_1 by M_2 regular grid of spatial locations.
  • lonlat.grid: an M_1 by M_2 by 2 array of lon/lat coordinates. The [i,j,]-th element corresponds to the lon/lat coordinates for the location that observes the time series in the [i,j,]-th element of Data.grid,
which is the not the same as the following scripts. The script `conv_identification_algo.R` will output the correct input for the following running order.

Running order

Required input -

  • Data: a n by d matrix of observations. Each row is a time series of length n for one of d spatial locations.
  • coords: a d by 2 matrix of lon/lat coordinates. The i-th row should correspond to the lon/lat coordinates for the location that observes the time series in the i-th row of Data.
  • (if following Richards et al., 2022b) elev: a d vector of elevation values. The i-th element should correspond to the elevation at the i-th row of coords.

Save these in a single Rdata file as Data/Data.Rdata. If using the mixture model in Richards et al. (2022b), replace Data/Data.Rdata with either Data/conv.Rdata or Data/nonconv.Rdata and run the code in MarginalAnalysis/ and DependenceAnalysis/ twice - once for each mixture component.

MarginalAnalysis/ - Scripts in this directory are used to fit the marginal model described in Sections 2.1 and 4.2 of Richards et al. (2022a) or the extensions described in Section 3.2 of Richards et al. (2022b)

  1. GAM_fit.R - Marginal GPD, quantile and logistic GAM fits
  2. marginal_transform.R - Transforms data to Laplace margins

DependenceAnalysis/ - Scripts in this directory are used to fit the various extremal dependence models described in Sections 2.2 and 4.3 of Richards et al. (2022a) or in Section 3.3 of Richards et al. (2022b)

  1. free_fit.R - Provides the diagnostic "free" fits displayed in Figure 2 in Richards et al. (2022a). Not required if adopting the methods of Richards et al. (2022b)
  2. spatial_fit.R - Fit the full spatial model using the censored pseudo-likelihood described in Sections 3.1 and 3.2 of Richards et al. (2022a). Both the full model and the asymptotically dependent model can be fitted. Also fits convective and nonconvective SCE models from Richards et al. (2022b)
  3. sim_event.R - Simulate extreme events, see Figure 3 in Richards et al. (2022a) or Figure 6 in Richards et al. (2022b)

AggregateAnalysis/ - Scripts in this directory are used to derive samples of spatial aggregates (denoted $R_\mathcal{A}$ in the paper) and provide diagnostics and return level estimates

  1. agg_sim.R - Draw samples of $R_\mathcal{A}$ if using methodology of Richards et al. (2022a); if using the methodology of Richards et al. (2022b), instead run agg_sim_mix.R
  2. agg_diags.R - Produce Q-Q diagnostic plots and estimate return level curves for $R_\mathcal{A}$

Uncertainty estimates

To quantify uncertainty in the marginal and extremal dependence fits, replace Data with a bootstrap sample of the observations; the bootstrap sample should also be a n by d matrix. In Richards et al. (2022a,2022b), we apply the stationary bootstrap (Politis and Romano, 1994) with expected block size corresponding to 48 hours. The function used to derive a single stationary bootstrap sample is given in src/stat_boot.R.

About

Fitting spatial conditional models for extreme precipitation

Topics

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages