Skip to content

Karpova-Lab/fibers

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

6 Commits
 
 
 
 
 
 
 
 

Repository files navigation

Fiber etching control software

gui

We etch the fibers of the custom implant that we build for rodent behavior experiments. Etching fibers can help increase the number of cells reached for optogenetic stimulation (see: https://www.nature.com/articles/nature14066/figures/11)

This GUI application is used to control a Zaber T-LHM050A linear stage. With it, we can precisely submerge glass fibers into acid then slowly retract the fibers to create an etched and tapered point.

results

Dependencies

Protocol

Based on the Brody Lab protocol we do the following:

  • Use a stripping tool to strip a 200 micron Newport fiber (F-MBB) to remove outer jacket
  • Use a cleaver to cut fiber down to ~ 15mm
  • Use a butane torch/lighter to burn away ~3mm of thin plastic coating to expose the tip for etching
  • Fill a small container with 48% HF, and top with a layer of mineral oil
  • Submerge the tip ~2mm past the mineral oil/HF interface.
  • Retract the fiber at ~20µm/min. This can vary drastically depending on how fresh the HF is. The more times the same HF is used, the weaker the etching is, and therefore the retraction will need to be slower or the dipping process may need to be repeated.

Etching comparisons

The tests below were done to see if our process for etching was effective. Once we saw that it worked, we wanted to determine which brand of fiber produced the best results.

Setup

  • Made agar with 100mL buffer and ~ 0.7g of agarose
  • Powered at the same time via the same PWM circuit
  • Camera settings:
    • Aperture: F1.7
    • Exposure time : 1/500 s
    • ISO: 50

Etching comparison

Newport F-MBB was compared with and without having been etched.

etching

Manufacturer comparison

Both the Newport F-MBB and Thorlabs FP220URT were etched then compared.

manufacturers

About

No description, website, or topics provided.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages