Releases: Kautenja/PotatoChips
Releases · Kautenja/PotatoChips
Potato Chips 2.0.0
PotatoChips 1.11.0
- Fix wavetable editor screens to allow right clicks
- Fix name of wave table editor Undo/Redo actions
- Mirror monophonic inputs to modules that are running poly-phonically
- new module: Blocks
- inspired by Mutable Instruments Edges
- fix panels with missing inputs / potentiometers
- InfiniteStairs looked liked an input was missing for a VCA on the NES triangle
- PalletTownWavesSystem had a missing sync input that has been removed from the panel
- Fix gain control on Super Echo and Super VCA to be less drastic; fix maxes to have clean limits in the GUI (as opposed to something like 6.13434dB at max, it's now precisely 6dB at max)
Potato Chips 1.10.2
- fix sync inputs for Infinite Stairs, StepSaw, and Jairasullator. the inputs were triggering when the input crossed 0V, they now trigger when the signal crosses the threshold of 0.01V to 0.02V (approximately 0V). This allows the sync to be triggered by a DC signal, like a gate or LFO.
- fix trigger inputs on Pallet Town Waves System, Super ADSR, Boss Fight, Infinite Stairs, Jairasullator, Mega Tone, Mini Boss, and Pot Keys. They now work with AC and DC signals.
- fix clock dividers for CV acquisition and LED light updates. They now fire on the downbeat of the source clock
Potato Chips 1.10.1
- fix sync inputs for Infinite Stairs, StepSaw, and Jairasullator. the inputs were triggering when the input crossed 2V, they now trigger when the signal crosses zero (from negative to positive)
- fix trigger-able inputs to not fire when opening a patch
- update parameter descriptions for Boss Fight and Mini Boss
- LFO now shows the Hz measurement of the LFO
- multiply now shows "1/2" instead of "0" when all the way CCW
- FMS now measures the sensitivity in % of halftone
- AMS now measures the sensitivity in dB
- change "prevent clicks from envelope generator" to "soft reset envelope generator"
- add soft reset envelope generator to BossFight
Potato Chips 1.10.0
- new module: Mini Boss
- single operator version of an operator from Boss Fight
- fix issues with Boss Fight
- fix issue where extreme negative voltage to the AR input would cause the
envelope generator to be silent. This is an intentional design of the
YM2612, but is better to omit for this module - fix polyphonic pitch calculation for the operators
- fix issue where extreme negative voltage to the AR input would cause the
Potato Chips 1.9.0
- new module: Super Echo
- echo effect from the SNES (16-bit PCM)
- Gaussian filter removed
- BRR down-sampling removed
- 2 channels of echo effect
- feedback and delay parameters with CV control
- stereo mix control with surround effect through phasing
- 8-tap FIR filter with coefficient parameterization and CV control
- extended delay control up to 512ms
- echo effect from the SNES (16-bit PCM)
- new module: Super VCA
- Gaussian interpolation filter from the SNES
- low-pass IIR filter with parameterized coefficients (for operational modes)
- designed to act as a low-pass gate / VCA without a VCF
- new module: Super ADSR
- Envelope generator from the SNES
- Attack, Decay, Sustain, and Release rate stages
- new blank panels:
- illustration of Sony S-SMP IC
Potato Chips 1.8.3
- fix manual link for Boss Fight
PotatoChips 1.8.2
- replace BossFight global data structures with Windows friendly implementation
Potato Chips 1.8.1
- remove accidental debugging modules from 1.8.0 release
Potato Chips 1.8.0
- header-only DSP library
- fix issue where some modules would generate a "pop"/"click"/"impulse" on
start up: 2A03, GBS, VRC6, FME7, POKEY, Ay-3-8910, 106, SN76489 - fixes and updates to 2612 (rev2 branded as "Boss Fight")
- code optimizations
- updated panel layout
- saturation / aliasing control
- individual operator retrigger input for envelope generators
- individual operator triggers, gates, VOCT, and frequency knobs
- individual operator looping AD envelope generator
- individual operator sensitivity to LFO-based FM and AM
- VU Meter to monitor levels / clipping / aliasing
- invert sustain level and total level controls to be more intuitive
- updates to SN76489 (rev2 branded as "Mega Tone")
- audio rate FM
- code optimizations
- new panel design
- attenuverter for frequency modulation that acts as fine frequency
control when nothing is patched - normalled inputs
- normalled outputs (i.e., mixer, with clipping, and aliasing)
- VU Meter to monitor levels / clipping / aliasing
- updates to FME7 (rev2 branded as "Pulses")
- audio rate FM
- changed default amplifier level to 10 instead of 7
- new panel design
- attenuverter for frequency modulation that acts as fine frequency
control when nothing is patched - normalled inputs
- normalled outputs (i.e., mixer, with clipping, and aliasing)
- VU Meter to monitor levels / clipping / aliasing
- updates to VRC6 (rev2 branded as "Step Saw")
- audio rate FM
- sync input for saw wave generator
- new panel design
- attenuverter for frequency modulation that acts as fine frequency
control when nothing is patched - normalled inputs
- normalled outputs (i.e., mixer, with clipping, and aliasing)
- VU Meter to monitor levels / clipping / aliasing
- updates to 2A03 (rev2 branded as "Infinite Stairs")
- hard sync input
- amplifier for steppy triangle generator
- sync input for steppy triangle generator and noise generator
- audio rate FM
- new panel design
- attenuverter for frequency modulation that acts as fine frequency
control when nothing is patched - normalled inputs
- normalled outputs (i.e., mixer, with clipping, and aliasing)
- VU Meter to monitor levels / clipping / aliasing
- updates to AY-3-8910 (rev2 branded as "Jairasullator")
- internal envelope / LFO (full synthesizer voice)
- discrete noise period control
- audio rate FM
- offet and scale parameters in DAC mode
- new panel design
- attenuverter for frequency modulation that acts as fine frequency
control when nothing is patched - normalled inputs
- normalled outputs (i.e., mixer, with clipping, and aliasing)
- VU Meter to monitor levels / clipping / aliasing
- updates to POKEY (rev2 branded as "Pot Keys")
- audio rate FM
- new panel design
- attenuverter for frequency modulation that acts as fine frequency
control when nothing is patched - normalled inputs
- normalled outputs (i.e., mixer, with clipping, and aliasing)
- VU Meter to monitor levels / clipping / aliasing
- updates to 106 (rev2 branded as "Name Corp Octal Wave Generator")
- undo/redo support for wavetable edits
- new panel design
- attenuverter for frequency modulation that acts as fine frequency
control when nothing is patched - normalled inputs
- normalled outputs (i.e., mixer, with clipping, and aliasing)
- VU Meter to monitor levels / clipping / aliasing
- updates to GBS (rev2 branded as "Pallet Town Waves System")
- undo/redo support for wavetable edits
- fixed wave channel to track VOCT correctly
- new panel design
- attenuverter for frequency modulation that acts as fine frequency
control when nothing is patched - normalled inputs
- normalled outputs (i.e., mixer, with clipping, and aliasing)
- VU Meter to monitor levels / clipping / aliasing