This is a command-line utility to convert CSV files of transactions, such as you might download from an online banking service, into the format used by John Wiegley's excellent Ledger system.
The 'i' stands for interactive. Here's what it's designed to do:
-
For each CSV input you give it, it creates a Ledger output.
-
As it runs through the entries in the CSV file, it tries to guess which Ledger account and Ledger payee they should be posted against, based on your historical decisions.
-
It shows you which account, payee, (optionally tags), it's going to use, giving you the opportunity to change it. If it got it right, just hit return.
-
When you are entering an account/payee name, you get auto-completion if you press the Tab key. You don't have to match the start of the name, so typing 'foo[tab]' inserts 'Expenses:Food'.
-
When you are entering a tag, you get auto-completion if you press the Tab key. If you would like to remove a tag from the list of tags just prefix the tag with a minus '-'. When you are done with the tags just hit return.
-
It stores the history of auto-completion in a mapping file, for converting transaction descriptions onto payee/account(/tag) names. You can also edit this by hand. It can load this in future as the basis of its guesses.
-
The payee/account names used in the auto-completion are read both from the mapping file and, optionally, from a Ledger file or files. It runs
ledger payeesandledger accountsto get the names. It can also scan a seperate ledger file containing 'account' definitions. The tags are only read from the mapping file.
icsv2ledger.py [options] -a STR [infile [outfile]]
infile input filename or stdin in CSV syntax
outfile output filename or stdout in Ledger syntax
Options can either be used from command line or in configuration file.
--account is a mandatory option on command line. --config-file and
--help are only usable from command line.
--account STR, -a STR
ledger account used as source
--clear-screen, -C clear screen for every transaction
--cleared-character {*,!, }
character to clear a transaction
--config-file FILE, -c FILE
configuration file
--credit INT CSV column number matching credit amount
--csv-date-format STR
date format in CSV input file
--csv-decimal-comma comma as decimal separator in the CSV
--currency STR the currency of amounts
--date INT CSV column number matching date
--debit INT CSV column number matching debit amount
--default-expense STR
ledger account used as destination
--delimiter CSV delimiter
--desc STR CSV column number matching description
--effective-date INT CSV column number matching effective date
--encoding STR text encoding of CSV input file
--incremental append output as transactions are processed
--ledger-date-format STR
date format for ledger output file
--ledger-decimal-comma
comma as decimal separator in the ledger
--ledger-file FILE, -l FILE
ledger file where to read payees/accounts
--mapping-file FILE file which holds the mappings
--accounts-file FILE file which holds a list of allowed accounts
--quiet, -q do not prompt if account can be deduced
--reverse reverse the order of entries in the CSV file
--skip-dupes skip transactions that have already been imported
--skip-lines INT number of lines to skip from CSV file
--skip-older-than skip entries more than X days old
--tags, -t prompt for transaction tags
--template-file FILE file which holds the template
-h, --help show this help message and exit
Options can either be used from command line or in configuration file.
From command line the syntax is --long-option VALUE with dashes, and
in configuration file the syntax is long_option=VALUE with
underscores.
There is an order of precedence for options. First hard coded defaults (documented below) are used, overridden by options from configuration file if any, and finally overridden by options from command line if any.
--account STR, -a STR
is the ledger account used as source for ledger transactions. This is
the only mandatory option on command line. Default is
Assets:Bank:Current.
When used from command line, it is both the section name in
configuration file and the account name. Account name could then be
overridden in configuration file. See section
Configuration file example where SAV
from command line is overridden with account=Assets:Bank:Savings Account.
--clear-screen, -C
will clear the screen before every prompting. Default is False.
--cleared-character {*,!, }
is the character to mark a transaction as cleared. Ledger possible value
are * or ! or . Default is *.
--config-file FILE, -c FILE
is configuration filename.
The file used will be first found in that order:
- Filename given on command line with
--config-file, .icsv2ledgerrcin current directory,.icsv2ledgerrcin home directory.
--credit INT
is the CSV file column which contains credit amounts. The first column
in the CSV file is numbered 1. Default is 4.
See also documentation of --debit option for negating amounts.
--csv-date-format STR
describes the date format in the CSV file.
See the python documentation for the various format codes supported in this expression.
--csv-decimal-comma
will assume that number use the comma ',' as decimal in the csv.
If the --ledger-decimal-comma option is not set, comma will be
converted into dot.
--currency STR
is the currency of amounts. Default is locale currency_symbol.
--date INT
is the CSV file column which contains the transaction date. Default is
1.
--debit INT
is the CSV file column which contains debit amounts. Default is 3.
If your bank writes all amounts in same column, credits as positive
amounts and debits as negative amounts, then set credit to correct
column and debit to 0.
If your bank writes debits as a negative number and you want to negate
the amount, then use --debit=-3. It will negate amounts in column 3
and use them as debits amounts.
--default-expense STR
is the default ledger account used as destination (generally an expense)
for ledger transactions. Default is Expenses:Unknown.
--delimiter STR
is the CSV delimiter character. Default is ,. Special characters can be
expressed using standard escape sequences, such as \t for a tab.
--desc STR
is the CSV file column which contains the transaction description as
supplied by the bank. Default is 2.
This description will be used as the input for determining which payee and account to use by the auto-completion.
It is possible to provide a comma separated list of CSV column indices
(like desc=2,5) that will concatenate fields in order to form a unique
description. That enriched description will serve as base for the
mapping.
--effective-date INT
is the CSV column number which contains the date to be used as the
effective date. Default is 0. Use of this option currently requires a
template file. See section
Transaction template file.
--encoding STR
is the text encoding of the CSV input file. Default is utf-8. The encoding
should be specified if the CSV file contains non-ASCII characters (typically in
the transaction description) in an encoding other than UTF-8.
--incremental
appends output as transactions are processed. The default flow is to process all CSV input and then output the result. When --incremental is specified, output is written after every transaction. This allows one to stop (ctrl-c) and restart to progressively process a CSV file (--skip-dupes is a useful companion option).
--ledger-date-format STR
describes the date format to be used when creating ledger entries. If
--ledger-date-format is defined, then --csv-date-format must also be
defined to be able to convert dates. If --ledger-date-format is not
defined, then the date from CSV file is reused.
See the python documentation for the various format codes supported in this expression.
--ledger-decimal-comma
will assume that number should be print using the comma ',' as decimal when creating ledger entries.
If the --csv-decimal-comma option is not set, dot will be converted
into comma.
--ledger-file FILE, -l FILE
is ledger filename where to get the list of already defined accounts and payees.
The file used will be first found in that order:
- Filename given on command line with
--ledger-file, .ledgerin current directory,.ledgerin home directory.
--mapping-file FILE
is the file which holds the mapping between the description and the payee/account names to use. See section Mapping file.
The file used will be first found in that order:
- Filename given on command line with
--mapping-file, .icsv2ledgerrc-mappingin current directory,.icsv2ledgerrc-mappingin home directory.
Warning: the file must exists so that mappings are added to the file.
--accounts-file FILE
is an optional file that can be used to hold a master list of all account names, and will be used as a source for account names. See section Accounts file.
The file used will be first found in that order:
- Filename given on command line with
--accounts-file, .icsv2ledgerrc-accountsin current directory,.icsv2ledgerrc-accountsin home directory.
--quiet, -q
will not prompt if account can be deduced from existing mapping. Default
is False.
--reverse
will print ledger entries in reverse of their order in the CSV file.
--skip-dupes
will skip transactions if the exact CSV already appears as a ; CSV: ... comment in the current ledgerfile (which means your output template will need this comment). This can help if you download statements without using a precise date range. A useful pattern is to include CSV comments for both "sides" of a transaction if you download from multiple sources that resolve to a single transaction (e.g. paying a credit card from checking).
--skip-lines INT
is the number of lines to skip from the beginning of the CSV file.
Default is 1.
--tags, -t
will interactively prompt for transaction tags. Default is False.
The normal behavior is for one description to prompt for payee and account, and store this in mapping file. By setting this option, the description can also be mapped to additional tags.
At the prompt: fill a tagname and press Enter key as many times as you need
tags. Remove an existing tag by preceding it with minus, like
-tagname. When finished, press Enter key on an empty line.
This --tags option only prompt for tags. You have to add ; {tags}
in your template to make tags appear in generated Ledger transactions.
--template-file FILE
is template filename, which contains the template to use when generating ledger transactions. See section Transaction template file.
The file used will be first found in that order:
- Filename given on command line with
--template-file, .icsv2ledgerrc-templatein current directory,.icsv2ledgerrc-templatein home directory.
--skip-older-than DAYS
will not process any entries in the CSV file which are more than DAYS old. If DAYS is negative then the entire CSV file is processed.
The below command will use the [SAV] section of the configuration file to process the CSV file.
./icsv2ledger.py -a SAV file.csv
The following is an example configuration file where you can save your icsv2ledger's options.
A configuration file typically contains one section per bank account to be imported. In the below example there are two bank accounts: SAV and CHQ.
[SAV]
account=Assets:Bank:Savings Account
currency=AUD
date=1
csv_date_format=%d-%b-%y
ledger_date_format=%Y/%m/%d
desc=6
credit=2
debit=-1
mapping_file=mappings.SAV
[SAV_addons]
beneficiary=3
purpose=4
[CHQ]
account=Assets:Bank:Cheque Account
currency=AUD
date=1
csv_date_format=%d/%m/%Y
ledger_date_format=%Y/%m/%d
desc=2
credit=3
debit=4
mapping_file=mappings.CHQ
skip_lines=0
In section Configuration file example the
SAV_addons section enables to save a CSV field value to a tag value.
Those tags can then be used, for the SAV account, in your own
transaction template:
; purpose: {addon_purpose}
; beneficiary: {addon_beneficiary}
A typical mapping file might look like:
/SAFEWAY/,Safeway,Expenses:Food
/ITUNES.*/,iTunes,Expenses:Entertainment
THE WRESTLERS INN,"The ""Wrestlers"" Inn",Expenses:Food
/MACY'S/,"Macy's, Inc.",Expenses:Food
MY COMPANY 1234,My Company,Income:Salary
MY COMPANY 1234,My Company 1234,Income:Salary:Tips
It uses simple string-matching by default, but if you put a '/' at the start and end of a string it will instead be interpreted as a regular expression.
Mapping is based on your historical decisions. Later matching entries
overwrite earlier ones, that is in example above MY COMPANY 1234 will
be mapped to My Company 1234 and Income:Salary:Tips.
To prevent inconsistencies it is possible to user ledger --strict mode, along with a file that defines a list of allowable accounts. (See the ledger 3 manual, section 4.6 'Keeping it Consistent')
The accounts file should look like:
account Expenses:Food
account Expenses:Enternainment
account Income:Salary
account Income:Salary:Tips
All other lines will be ignored so you if you have a single ledger file that has account definitions mixed throughout it, it is safe (although potentially time consuming) to pass it to icsv2ledger as the accounts-file.
The built-in default template is as follows:
{date} {cleared_character} {payee}
; MD5Sum: {md5sum}
; CSV: {csv}
{debit_account:<60} {debit_currency} {debit}
{credit_account:<60} {credit_currency} {credit}
Details on how to format the template are found in the Format Specification Mini-Language.
The values that can be used are: date, effective_date, cleared_character,
payee, transaction_index, debit_account, debit_currency, debit,
credit_account, credit_currency, credit, tags, md5sum, csv.
And also the addon tags like addon_xxxx. See section
Addons.
Feedback/contributions most welcome.
On Mac OS X when CSV is passed via stdin to icsv2ledger you may not see any prompts offering defaults and asking for your input. This is due to an inferior readline library (libedit) installed by default on Mac OS X. Install a proper readline library and you're good to go.
% sudo easy_install readline
On Windows the default Python installation does not provide a readline library. The pyreadline library provides native python emulation of this functionality and must be installed to run this utility.
icsv2ledger was originally created by Quentin Stafford-Fraser but includes valuable contributions from many others, including Peter Ross, Alexis Hildebrandt, Thierry and Eric Entzel.