Skip to content
This repository has been archived by the owner on May 2, 2022. It is now read-only.

Automated build of OpenWrt firmware for Phicomm K2P wireless router.

License

Notifications You must be signed in to change notification settings

KevinMX/Actions-OpenWrt-Phicomm-K2P

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

85 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Archived.

padavan 是 ramips 最后的归宿。 ——天灵@immortalwrt/immortalwrt#528

建议使用 hanwckf/padavan-4.4, MeIsReallyBa/padavan-4.4, padavanonly/padavan-4.4 (在MeIsReallyBa的基础上有小改), 或者 hiboy的DRV_V5/3.4版. Padavan在稳定性、性能、HWNAT(无线&有线)、SFE、WiFi上都有优势,甚至你还可以在4.4内核的Padavan上用SQM QoS(会自动关闭HWNAT,对于500M以下宽带问题不大)。

并不推荐在 K2P 上运行 Project V/X 之类的网络代理工具,放过MT7621和可怜的128MiB内存吧。

padavan is the final destination for ramips. --Tianling Shen@immortalwrt/immortalwrt#528

Please consider using hanwckf/padavan-4.4, MeIsReallyBa/padavan-4.4, padavanonly/padavan-4.4 (with minor changes to MeIsReallyBa repo), or the hiboy DRV_V5 version from here, which are all stable, with great performance, MTK HWNAT for both ethernet and wireless, SFE support, and last but not least, better WiFi. You can even use SQM QoS on padavan 4.4 branch (HWNAT will be disabled automatically, for <500Mbps bandwidth it should be fine).

Running network proxies such as Project V/X is not recommend, due to K2P's MT7621 chipset and 128MiB RAM.

Actions-OpenWrt

LICENSE GitHub Stars GitHub Forks

Build OpenWrt using GitHub Actions

Read the details in my blog (in Chinese) | 中文教程

Usage

  • Click the Use this template button to create a new repository.
  • Generate .config files using Lean's OpenWrt source code. ( You can change it through environment variables in the workflow file. )
  • Push .config file to the GitHub repository.
  • Select Build OpenWrt on the Actions page.
  • Click the Run workflow button.
  • When the build is complete, click the Artifacts button in the upper right corner of the Actions page to download the binaries.

Tips

  • It may take a long time to create a .config file and build the OpenWrt firmware. Thus, before create repository to build your own firmware, you may check out if others have already built it which meet your needs by simply search Actions-Openwrt in GitHub.
  • Add some meta info of your built firmware (such as firmware architecture and installed packages) to your repository introduction, this will save others' time.

Acknowledgments

License

MIT © P3TERX

About

Automated build of OpenWrt firmware for Phicomm K2P wireless router.

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages