Boxflat

Boxflat for Moza Racing. Control your Moza gear settings!

For moza ffb driver, check out universal-pidff by @JacKeTUs

For more information about the Moza Racing serial protocol see Moza serial protocol page

Functionality

Device	Completeness	WIP
Home page	100%
Base	100%
Wheel	100%
Pedals	100%
Dashboard	0%	Dashboard settings
Hub	0%	Rows with connection status
H-Pattern	100%
Sequential	100%
Handbrake	100%
E-Stop	100%
Other settings	100%
Presets	100%

Boxflat automatically detects is a device (shifter/pedals) needs a detection fix and creates a proper virutal device. This fixes game detection. Wheel indicator blinking colors can't be read from the wheel. This is a limitation of the current firmware.

Ideas

• Telemetry ingestion through REST API/WebSockets
• Cammus support
• PXN Support
• Simagic support

Firmware upgrades

There are some EEPROM functions available, but I need to do more testing to make sure I won't brick anything. For now, just use Pit House on Windows if you can, as FW upgrade support is not coming in the near future.

Compatibility

Moza commands and their protocol is hardware agnostic, so any implemented feature should work with any wheelbase, wheel, pedal set etc. Some Wheel settings are device-specific (FSR Wheel dashboard for example)

Installation

Flatpak

Boxflat is available on Flathub

Udev rule installation for flatpak

Copy this into terminal and execute with root permissions

sudo tee /etc/udev/rules.d/99-boxflat.rules <<< 'SUBSYSTEM=="tty", KERNEL=="ttyACM*", ATTRS{idVendor}=="346e", ACTION=="add", MODE="0666", TAG+="uaccess"'

Unplug and plug in your deivce to trigger this new rules. Alternatively, you can reboot your system.

Arch Linux:

https://aur.archlinux.org/packages/boxflat-git

Manual:

This package depends on:

• python >= 3.11
• gtk4
• libadwaita >= 1.6
• cairo 1.18
• gobject-introspection
• pkexec (optional)

Python dependencies:

• pyyaml 6.0.2
• psutil 6.1.0
• pyserial 3.5
• pycairo 1.27.0
• PyGObject 3.50.0
• evdev 1.7.1

# Just run:
$ ./entrypoint.py --local
# or
$ python3 entrypoint.py --local

# use `--dry-run` argument to disable serial communication
$ ./entrypoint --local --dry-run

Installation:

# Run `install.sh` with root permissions.
$ sudo ./install.sh
# Application will be installed as `boxflat`
$ boxflat

Removal:

# Run `install.sh remove` with root permissions.
$ sudo ./install.sh remove

Some more screenshots

© 2024 Tomasz Pakuła Using Arch BTW