LilyGo T-Dongle-S3 turned into a Rubber Ducky with wifi, controllable through a web server
Board should be ESP32-S3-USB-OTG in Arduino IDE.
Use libraries from https://github.com/Xinyuan-LilyGO/T-Dongle-S3 under /lib if available.
Change wifi/access point name/password in code to what you need.
Tested on Linux but most keyboard codes should work in Windows too. Unsure about apple products unless someone wants to donate one.
Go to IP address on screen or 192.168.0.1 if in AP mode
First input will type out the string in the box
Second is to run a single command
Third is to write code
Fourth is to save above code
Fift is to run code
Sixth is to delete a file
MUST save/run/delete a file with a SLASH IN FRONT and EXTENSION AFTER i.e. /example.txt
PRINT: Types out the following string
PRINTLN: Types out the following string then hits enter
GUI: Presses and releases the left GUI key
GUI : Presses the left GUI and a single character. Single character can be a number or lowercase letter.
DELAY x: Waits x ms
ENTER: Hits enter
HOLD: Holds a single key. If letter, then it has to be lowercase.
Anything that doesn't match the above gets treated as a comment. Comments can not, at the time, be put on the same line as a command.
CTRL
ALT
SHIFT
DEL
RIGHT
LEFT
UP
DOWN
F1-F12
ENTER
TAB
BACKSPACE
SPACE
Access point web page IP: 192.168.0.1
Access point SSID: Iphone13_Hotspot
Web login user: root
Web login password: toor
GUI
DELAY 500
PRINTLN web
DELAY 1000
PRINTLN www.youtube.com/watch?v=dQw4w9WgXcQ
- Read keyboard led states
- Add bluetooth command and control capabilities
- Add mouse control
- Mount as USB storage device
- Built in method to get USB storage drive
- Shell through USB port controllable through web server
- OS detection
- Preloaded scripts to automatically grab usernames and hashes, network credentials, chrome/firefox passwords, rick roll, etc.